
LED AL5887
FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.
7-Segment MAX7221CNG is an open-source printed circuit board by FluYVy, from the FluYVy/Modular-Electronics-Toolkit repository on GitHub. It is a 2-layer board of 77 × 77 mm with 11 parts on 23 nets, routed with 172 tracks and 6 vias.
It is built around the CC56-12SURKWA. Its parts include 3 ICs, 2 capacitors, 1 resistor and 1 connector.
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators. The system created aims to be modular so that different parts of it can be mixed to create new and creative projects. Different libraries are also provided to help students use these modules.
To further help with the development of different projects, a visual coding engine can be used to create the needed code. This is done with Blockly, which was developed by Google.
The modules created should be compatible with any microcontroller, as long as they can handle 5 volts.
[!WARNING] The provided code and libraries have only been tested with a board using the ATMEGA16A-Chip. For other microcontrollers, you may need to create your own code.
The modules are designed to be able to create new projects by combining them together. As such, even complex problems can be solved easily.
The libraries are designed to be used by students and as such are easy to use and adapt to your project or solution. This is reinforced by the block-based code editor for easy project creation.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | CC56-12SURKWA | Display_7Segment:CA56-12SURKWA_autorouting | U4, U5 |
| 1 | 0.1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 10µF | Capacitor_SMD:C_Elec_3x5.4 | C1 |
| 1 | 25kR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | B6B-EH-A | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J2 |
| 1 | MAX7221xNG | Package_DIP:DIP-24_W7.62mm | U1 |

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

FluYVy/Modular-Electronics-Toolkit
This project is a diploma thesis done at the HTL Rankweil. It aims to provide future students with a better way to understand and work with different sensors and actuators.

AvishkaVishwa/Microcontroller-Design-Project-Temperature-Monitoring-System
This project is a temperature display and alarm system designed for educational purposes as part of the IA 2209 - Microcontroller Laboratory course.


angelozyh/STM32-Environmental-Monitor-PCB
A custom 2-layer PCB designed in KiCad for an STM32-based environmental monitoring system. The board integrates an STM32 NUCLEO-F303K8, BME280 environmental sensor, dual SN74HC595 shift registers, a 4-digit 7-segment…




Spac3y/seg7-85
A 4-digit 7-segment display driven by an ATtiny85, scrolling a text message across the display.

It measures 77 × 77 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the CC56-12SURKWA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FluYVy/Modular-Electronics-Toolkit repository on GitHub, at the commit this page was made from: the board is Hardware/Modules/7-Segment_Anzeige/7-Segment_MAX7221CNG_.kicad_pcb and its schematic Hardware/Modules/7-Segment_Anzeige/7-Segment_MAX7221CNG_.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask FluYVy before reusing the design.