

ExpansionUSB
Designing and building electronics cards for own projects.
- Size
- 51.4 × 64.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 23
- Pads
- 110
- Tracks, vias
- 222, 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Nov 2018
- Updated
- 14 Oct 2019
Overview
ExpansionUSB is an open-source printed circuit board by flukedf, from the flukedf/PCB-Cards repository on GitHub. It is a 2-layer board of 51.4 × 64.1 mm with 20 parts on 23 nets, routed with 222 tracks and 6 vias.
It is built around the CD4051BE and IRF640N. Its parts include 8 connectors, 4 capacitors, 4 ICs, 1 resistor and 1 transistor. It belongs with the ESP8266 boards of this library.
Main components
2Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitors_SMD:C_1210_HandSoldering | C1, C3 |
| 2 | 1nF | Capacitors_SMD:C_1206_HandSoldering | C2, C4 |
| 2 | ACS712xLCTR-05B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U4 |
| 2 | USB_A | Connector_USB:USB_A_CNCTech_1001-011-01101_Horizontal | J1, J3 |
| 2 | USB_A | w_conn_pc:conn_usb_A | J2, J4 |
| 1 | +5V | Measurement_Points:Measurement_Point_Square-SMD-Pad_Big | VCC1 |
| 1 | 10K | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | CD4051B | Housings_DIP:DIP-16_W7.62mm | U3 |
| 1 | H1 | Socket_Arduino_Uno:Arduino_1pin | J5 |
| 1 | H2 | Socket_Arduino_Uno:Arduino_1pin | J6 |
| 1 | H3 | Socket_Arduino_Uno:Arduino_1pin | J7 |
| 1 | H4 | Socket_Arduino_Uno:Arduino_1pin | J8 |
| 1 | HEART | Measurement_Points:Measurement_Point_Square-SMD-Pad_Big | GND1 |
| 1 | IRF640N | TO_SOT_Packages_THT:TO-220_Horizontal | Q1 |
| 1 | NodeMCU_1.0_(ESP-12E) | ESP8266:NodeMCU-LoLinV3 | U2 |
More from flukedf/PCB-Cards
12- 2 layers200 × 74 mm

- 2 layers200.7 × 84.8 mm

- 2 layers

SeguridadPerimetral
flukedf/PCB-Cards
Designing and building electronics cards for own projects.
72 parts - 2 layers60 × 150 mm

20170409 remote tht
flukedf/PCB-Cards
Designing and building electronics cards for own projects.
53 parts - 2 layers110 × 56 mm

- 2 layers

- 2 layers90.2 × 85.1 mm

Contador ascendente
flukedf/PCB-Cards
Designing and building electronics cards for own projects.
23 parts - 2 layers52.8 × 42.7 mm

- 2 layers

- 2 layers133.4 × 35.6 mm

- 2 layers142.2 × 25.4 mm

- 2 layers7.7 × 23.2 mm

Similar boards
- 2 layers100 × 75 mm

RTSS Power Supply V2-5C
RadioThermal/RadioThermal_Soldering_OSHW
Open Source Hardware 470KHz Induction Soldering Iron
69 parts84CERN-OHL-P-2.0 - 2 layers281.9 × 90.4 mm

SevenSegmentClockV2
atomic14/supersise-seven-segment
The code, schematics and PCB layout are offered here without any support. It's fun project but it's also a learning experience.
100 parts5Unlicense - 2 layers100 × 50 mm

Led strip dmx
lrvdijk/ledstrip-dmx-receiver
KiCad Project for a DMX receiver driving a LED strip with 5050 SMD RGB LEDs.
38 parts1 - 2 layers200 × 25 mm

- 2 layers200 × 100 mm

Polykit x voice card
polykit/polykit-x-voice-card
Schematics and PCB layout for a voice card with multimode filter for a polyphonic synthesizer
207 parts58 - 2 layers124.5 × 77.5 mm

- 2 layers285 × 222.5 mm

Polykit x mainboard
polykit/polykit-x-mainboard
Schematics and PCB layout for a mainboard for an 8 voice polyphonic synthesizer
220 parts22 - 2 layers66 × 114.3 mm

Questions
How big is the ExpansionUSB PCB?
It measures 51.4 × 64.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ExpansionUSB use?
20 parts, built around the CD4051BE and IRF640N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ExpansionUSB KiCad files?
From the flukedf/PCB-Cards repository on GitHub, at the commit this page was made from: the board is ExpansionUSB/ExpansionUSB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ExpansionUSB design in my own project?
Its repository states no licence, so its author keeps all rights: ask flukedf before reusing the design.