
Base
florolf/lab-automation
Plugs into relay and can be used to provide switchable 5V USB power to downstream devices.

Plugs into relay and can be used to provide switchable 5V USB power to downstream devices.
Relay is an open-source printed circuit board by florolf, from the florolf/lab-automation repository on GitHub. It is a 2-layer board of 160 × 100 mm with 61 parts on 81 nets, routed with 531 tracks and 110 vias.
It is built around the THVD1400D, M24C64-RMN6TP and ULN2003ADRG, with the XC6206P332MR-G, KT-0603R and WJ15EDGRC-3.81-02P-14-00A among its other parts. Its parts include 15 resistors, 15 connectors, 8 diodes, 7 capacitors and 7 switches. It belongs with the home automation and IoT boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | red | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 7 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R9, R10, R11, R12, R13, R14 |
| 7 | G6K-2 | Relay_SMD:Relay_DPDT_Omron_G6K-2F-Y | K1, K2, K3, K4, K5, K6, K7 |
| 7 | MC_1,5_2-G-3.81 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J6, J8, J9, J10, J11, J12, J13 |
| 6 | 5k1 | Resistor_SMD:R_0402_1005Metric | R1, R2, R4, R6, R7, R15 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C15 |
| 3 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C4, C10, C11 |
| 2 | MSTBA_2,5_2-G-5,08 | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J2, J5 |
| 2 | TC2030 | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1, J7 |
| 1 | 100k 0.1% | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 470n | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | Conn_01x01_Socket | Connector:Banana_Cliff_FCR7350B_S16N-PC_Horizontal | J4 |
| 1 | Conn_01x01_Socket | Connector:Banana_Cliff_FCR7350R_S16N-PC_Horizontal | J3 |
| 1 | Header | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J15 |
| 1 | M24C64-RMN6TP | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | MSPM0L1100xRGE | local:TI_RGE0024B | U5 |
| 1 | Socket | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMD | J14 |
| 1 | THVD1400D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | ULN2003A | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23-3 | U2 |

trope-oshw/anthracite
MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)

l3wi/IWR-AOP-MODULE
60 GHz mmWave radar module built around TI's IWR6843AOP: USB-C or carrier-socket operation. KiCad 10, JLCPCB-ready.

Galacs/esp32s3-poc-devboard
ESP32-S3 based PoC board made to test step-down power supply design, 24v level shifter, crystal circuits and RF circuit

pierrejay/10base-t1l-usb-adapter
Single Pair Ethernet 10BASE-T1L USB adapter (LAN9500A + DP83TD510E)


igorilla666/water-controller
Scheda di controllo basata sul modulo Waveshare ESP32-S3-ETH, con ingressi sensore, RS-485, pilotaggio rele, buzzer e alimentazione/protezioni dedicate.


TLDSJPWORK/1000base-t1-converter
学習用 1000BASE-T1 ↔ 1000BASE-T メディアコンバーター
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
61 parts, built around the THVD1400D, M24C64-RMN6TP, ULN2003ADRG and XC6206P332MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the florolf/lab-automation repository on GitHub, at the commit this page was made from: the board is hw/relay/relay.kicad_pcb and its schematic hw/base/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask florolf before reusing the design.