2 layers29.1 × 45.1 mm
Detect
HarveyBates/Open-JIP
An open-source Arduino based chlorophyll fluorometer for quantifying photosynthesis in photosynthetic organisms.
30 parts47
2 layers
PCB ruche G2
FloHD/PCB_BeeWanVous pouvez mettre vos remarques ici. Merci.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 46
- Pads
- 127
- Tracks, vias
- 341, 32
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Nov 2020
- Updated
- 20 Nov 2020
Overview
PCB ruche G2 is an open-source printed circuit board by FloHD, from the FloHD/PCB_BeeWan repository on GitHub. It is a 2-layer board with 30 parts on 46 nets, routed with 341 tracks and 32 vias.
It is built around the STM32L432KCU6. Its parts include 8 capacitors, 8 ICs and 1 connector. It belongs with the STM32 boards of this library.
Main components
1README
README.mdPCB_BeeWan
Vous pouvez mettre vos remarques ici. Merci.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | C | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1, C2, C3, C4, C5, C6, C7, C8 |
| 5 | temp DS18B20 | PCB_ruche_G2:temp_hum | Z5, Z7, Z8, Z9, Z10 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | Rgir1, Rvent1 |
| 2 | GroveLink | PCB_ruche_G2:GroveLink | U7, U9 |
| 2 | Jumper | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1, JP2 |
| 2 | grove DHT22 | PCB_ruche_G2:temp_hum | Z6, Z11 |
| 1 | LDO_5_3V3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | LDO_DHT | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | LDO_jauge | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | LDO_son | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | RJ12 | Connector_RJ:RJ12_Amphenol_54601 | J1 |
| 1 | STM32L432KC | PCB_ruche_G2:STM32L432KC | U2 |
| 1 | ampli jauge contrainte | PCB_ruche_G2:ampli_jauge_contrainte | Z2 |
| 1 | grove son | PCB_ruche_G2:temp_hum | Z3 |
| 1 | wisol | PCB_ruche_G2:wisol | U1 |
Questions
What parts does the PCB ruche G2 use?
30 parts, built around the STM32L432KCU6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB ruche G2 KiCad files?
From the FloHD/PCB_BeeWan repository on GitHub, at the commit this page was made from: the board is PCB_ruche_G2/PCB_ruche_G2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB ruche G2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask FloHD before reusing the design.
Similar boards
- 4 layers70 × 27.5 mm
- 4 layers35 × 48 mm
Hoppy clock
borkdlabs/hoppy_clock
STM32-based alarm clock and RGB lamp: custom alarms wake you with light and your own songs, configured over USB from the browser or a Python tool
61 parts2MIT - 2 layers21.3 × 36.8 mm
- 2 layers43.5 × 30 mm
StmDevBoard
B-Leadr/STM32L4KC-Development-Board
A custom made mini development board for the STM32L432KC6 low power MCU.
23 parts - 4 layers90 × 80 mm
- 4 layers39.7 × 22.7 mm
- 2 layers45.1 × 20.8 mm
2FAK Programmable
planmarks/2FAK
2FAK Programmable USB and 2-Factor Authentication Key
26 partsApache-2.0