Skip to the content
2 layers44.3 × 28.3 mmTgvr, the printed circuit board in 3D
Size
44.3 × 28.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
20
Pads
54
Tracks, vias
74, 8
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Jun 2025
Updated
25 Jan 2026

Overview

Tgvr is an open-source printed circuit board by flexagoon, from the flexagoon/tg_voice_recorder repository on GitHub. It is a 2-layer board of 44.3 × 28.3 mm with 13 parts on 20 nets, routed with 74 tracks and 8 vias.

It is built around the ICS-43434. Its parts include 4 resistors, 2 capacitors, 2 connectors and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

Parts

13
QtyValueFootprintReferences
310kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3
2100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2
1100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
1ESP32-C3-ZeroWaveshare-ESP32:Waveshare-ESP32-C3-ZeroU1
1ICS-43434Sensor_Audio:InvenSense_ICS-43434-6_3.5x2.65mmMK1
1Micro_SD_CardConnector_Card:microSD_HC_Molex_47219-2001J1
1Push_Button_ExtConnector_Wire:SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mmJ2

The 10 most common of 13 parts.

Similar boards

  • 2 layers196 × 104 mmHack fft, the printed circuit board in 3D

    Hack fft

    hack-apollo/hack_spectrum

    a music spectrum use esp32-pico-d4 and ws2812b.

    611 parts28GPL-3.0
  • 2 layersAI voice assistant, the printed circuit board in 3D

    AI voice assistant

    DhamuVkl/ESP32S3-AI-Voice-Assistant

    This project is a complete DIY AI voice assistant built around the ESP32-S3 microcontroller. It combines custom PCB design, advanced audio processing, and cloud-based AI to create a device that rivals commercial smart…

    78 parts26MIT
  • 4 layers52.5 × 59.7 mmESPHome Indoor Multi Sensor, the printed circuit board in 3D

    ESPHome Indoor Multi Sensor

    mikelawrence/esphome-indoor-multi-sensor-hardware

    ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.

    113 parts14CERN-OHL-P-2.0
  • 4 layers108.6 × 87.7 mmBlinky badge light, the printed circuit board in 3D

    Blinky badge light

    rowr111/blinky-badge-light

    lighting badge with unique patterns and sound reactivity

    123 parts9MIT
  • 4 layers66.8 × 150 mmCooee Big brains, the printed circuit board in 3D

    Cooee Big brains

    DetectiveMittens/Cooee

    An open-source phone that can operate without GSM or LTE coverage. Utilising LoRa modulation and mesh networking to enable long range "off-grid" communication

    200 parts3GPL-2.0
  • 2 layers9.9 × 7.9 mmIcs43434 breakout, the printed circuit board in 3D

    Ics43434 breakout

    expoman/tdk_ics-43434_breakout

    small breakout board for the TDK ICS-43434 microphone chip

    5 parts2GPL-3.0
  • 2 layers178.6 × 66 mmESP32S3comV3.2, the printed circuit board in 3D

    ESP32S3comV3.2

    leeyumsk/IRL-Subtitles

    Using techniques similar to human perception to localize sounds and speakers.

    69 parts2
  • 4 layers88.1 × 59.4 mmChromapi motherboard v1, the printed circuit board in 3D

    Chromapi motherboard v1

    Mowibox/chromapi_motherboard

    Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.

    139 parts2Apache-2.0

Questions

How big is the Tgvr PCB?

It measures 44.3 × 28.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tgvr use?

13 parts, built around the ICS-43434. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tgvr KiCad files?

From the flexagoon/tg_voice_recorder repository on GitHub, at the commit this page was made from: the board is pcb/tgvr.kicad_pcb and its schematic pcb/tgvr.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tgvr design in my own project?

Its repository states no licence, so its author keeps all rights: ask flexagoon before reusing the design.