

- Size
- 44.3 × 28.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 20
- Pads
- 54
- Tracks, vias
- 74, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Jun 2025
- Updated
- 25 Jan 2026
Overview
Tgvr is an open-source printed circuit board by flexagoon, from the flexagoon/tg_voice_recorder repository on GitHub. It is a 2-layer board of 44.3 × 28.3 mm with 13 parts on 20 nets, routed with 74 tracks and 8 vias.
It is built around the ICS-43434. Its parts include 4 resistors, 2 capacitors, 2 connectors and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | ESP32-C3-Zero | Waveshare-ESP32:Waveshare-ESP32-C3-Zero | U1 |
| 1 | ICS-43434 | Sensor_Audio:InvenSense_ICS-43434-6_3.5x2.65mm | MK1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_47219-2001 | J1 |
| 1 | Push_Button_Ext | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm | J2 |
The 10 most common of 13 parts.
Similar boards
- 2 layers196 × 104 mm

- 2 layers

AI voice assistant
DhamuVkl/ESP32S3-AI-Voice-Assistant
This project is a complete DIY AI voice assistant built around the ESP32-S3 microcontroller. It combines custom PCB design, advanced audio processing, and cloud-based AI to create a device that rivals commercial smart…
78 parts26MIT - 4 layers52.5 × 59.7 mm

ESPHome Indoor Multi Sensor
mikelawrence/esphome-indoor-multi-sensor-hardware
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.
113 parts14CERN-OHL-P-2.0 - 4 layers108.6 × 87.7 mm

Blinky badge light
rowr111/blinky-badge-light
lighting badge with unique patterns and sound reactivity
123 parts9MIT - 4 layers66.8 × 150 mm

Cooee Big brains
DetectiveMittens/Cooee
An open-source phone that can operate without GSM or LTE coverage. Utilising LoRa modulation and mesh networking to enable long range "off-grid" communication
200 parts3GPL-2.0 - 2 layers9.9 × 7.9 mm

Ics43434 breakout
expoman/tdk_ics-43434_breakout
small breakout board for the TDK ICS-43434 microphone chip
5 parts2GPL-3.0 - 2 layers178.6 × 66 mm

ESP32S3comV3.2
leeyumsk/IRL-Subtitles
Using techniques similar to human perception to localize sounds and speakers.
69 parts2 - 4 layers88.1 × 59.4 mm

Chromapi motherboard v1
Mowibox/chromapi_motherboard
Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.
139 parts2Apache-2.0
Questions
How big is the Tgvr PCB?
It measures 44.3 × 28.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tgvr use?
13 parts, built around the ICS-43434. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tgvr KiCad files?
From the flexagoon/tg_voice_recorder repository on GitHub, at the commit this page was made from: the board is pcb/tgvr.kicad_pcb and its schematic pcb/tgvr.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tgvr design in my own project?
Its repository states no licence, so its author keeps all rights: ask flexagoon before reusing the design.