2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0
2 layers44.5 × 20.8 mm
Servodriver (copy)
FireShredder24/servodrivera simple servo driver board using a BJT oscillator
- Size
- 44.5 × 20.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 12
- Pads
- 52
- Tracks, vias
- 94, 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 May 2025
- Updated
- 1 May 2025
Overview
Servodriver (copy) is an open-source printed circuit board by FireShredder24, from the FireShredder24/servodriver repository on GitHub. It is a 2-layer board of 44.5 × 20.8 mm with 21 parts on 12 nets, routed with 94 tracks and 5 vias.
Its parts include 7 resistors, 3 capacitors, 2 diodes, 2 transistors and 2 connectors.
README
README.mdservodriver
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | TP-GND1, TP-GND2, TP-Vcc1, TP-Vcc2 |
| 3 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R7 |
| 2 | 0.47uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 2 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | 5.1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6 |
| 1 | 1K | Library:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1 |
| 1 | 1N4007 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 20K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 33uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 680 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | LED | LED_SMD:LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder | LED1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
Questions
How big is the Servodriver (copy) PCB?
It measures 44.5 × 20.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Servodriver (copy) use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Servodriver (copy) KiCad files?
From the FireShredder24/servodriver repository on GitHub, at the commit this page was made from: the board is servodriver (copy).kicad_pcb and its schematic servodriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Servodriver (copy) design in my own project?
Its repository states no licence, so its author keeps all rights: ask FireShredder24 before reusing the design.
Similar boards
- 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
