

PANEL COMPLETE
An Open Hardware PocketQube Satellite
- Size
- 130 × 190 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 287
- Nets
- 294
- Pads
- 1,135
- Tracks, vias
- 2,168, 454
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Oct 2022
- Updated
- 25 Dec 2022
Overview
PANEL COMPLETE is an open-source printed circuit board by fiozera, from the fiozera/FZsatellite repository on GitHub. It is a 2-layer board of 130 × 190 mm with 287 parts on 294 nets, routed with 2,168 tracks and 454 vias.
It is built around the MT3608, TEMT6000X01 and TPS73533DRBR, with the MCP73831, MPU-9250 and AO3401A among its other parts. Its parts include 77 resistors, 42 capacitors, 19 ICs, 13 connectors and 9 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
8MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersTEMT6000X01
1206-40℃~+100℃ 1.05mm 2mm 3nA 4mm Light Intensity 1206 Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light SensorsTPS73533DRBR
SON-8(3x3)-40℃~+125℃@(Tj) 1 13.2uVrms 280mV@(500mA) 3.3V 45uA 500mA 6.5V 68dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SON-8(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMCP73831
UncategorisedMicrochip TechnologyMPU-9250
QFN-24-EP(3x3)-40℃~+85℃ 2.4V~3.6V 8uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdFZsatellite
Um satélite PocketQube Open Hardware
Projeto desenvolvido em colaboração com:
- Jonathan Querubina https://github.com/chr0nu5
- Pedro Kaled https://github.com/pedrokdc
- Edson Pavoni
Licensed under CERN-OHL-S v2 or later
Parts
287| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18, JP19, JP20, JP22, JP26, JP30, JP34 +12 |
| 16 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R9, R10, R18, R73, R74, R75, R76, R77, R78, R79, R80, R81, R82 |
| 12 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6, H7, H8, H13, H14, H15, H16 |
| 12 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 11 | 0.01uF/10V | Capacitor_SMD:C_0402_1005Metric | C11, C14, C17, C32, C33, C36, C37, C40, C41, C44, C45 |
| 11 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4, JP5, JP6, JP9, JP10, JP23, JP24, JP27, JP28, JP31, JP32 |
| 10 | 5051101592 | SamacSys_Parts:5051101592 | J1, J2, J3, J4, J5, J8, J10, J11, J12, J13 |
| 10 | 5k | Resistor_SMD:R_0402_1005Metric | R13, R14, R33, R34, R43, R44, R53, R54, R63, R64 |
| 10 | Solar_Cell | Fiozera:KXOB25-12X1F-TR | SC1, SC2, SC3, SC4, SC5, SC6, SC7, SC8, SC9, SC10 |
| 9 | VAL** | Panelization:mouse-bite-2mm-slot | mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot |
| 8 | 1.24M | Resistor_SMD:R_0402_1005Metric | R37, R39, R47, R49, R57, R59, R67, R69 |
| 8 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C30, C31, C34, C35, C38, C39, C42, C43 |
| 8 | 5.49M | Resistor_SMD:R_0402_1005Metric | R36, R38, R46, R48, R56, R58, R66, R68 |
| 7 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5, C6, C7, C9, C28 |
| 7 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric | FB1, FB2, FB3, FB4, FB5, FB6, FB7 |
| 6 | NOPOP | Resistor_SMD:R_0402_1005Metric | R51, R52, R61, R62, R71, R72 |
| 5 | ERT-J0EM103J | SamacSys_Parts:THRMC1005X55N | RT1, RT2, RT3, RT4, RT5 |
| 5 | MCP3427-xUN | Package_SO:MSOP-10_3x3mm_P0.5mm | U7, U11, U13, U15, U17 |
| 5 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP3, JP21, JP25, JP29, JP33 |
| 5 | TEMT6000X01 | digikey-footprints:Phototransistor_SMD_4x2mm_TEMT6000X01 | Q1, Q2, Q3, Q5, Q7 |
| 4 | 0.1uF/16V | Capacitor_SMD:C_0402_1005Metric | C8, C10, C13, C16 |
| 4 | 22uH | SamacSys_Parts:LPS4018223MRC | L2, L3, L4, L5 |
| 4 | 5.1M | Resistor_SMD:R_0402_1005Metric | R40, R50, R60, R70 |
| 4 | 7.32M | Resistor_SMD:R_0402_1005Metric | R35, R45, R55, R65 |
| 4 | BQ25570 | Package_DFN_QFN:QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm | U12, U14, U16, U18 |
| 4 | D_Schottky | Diode_SMD:D_SOD-323 | D4, D6, D8, D10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopOnly | H9, H10, H11, H12 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R30, R31 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R20, R22, R26 |
| 3 | 2.2uF/10V | Capacitor_SMD:C_0603_1608Metric | C12, C15, C18 |
| 3 | LED_Small | LED_SMD:LED_0603_1608Metric | D11, D12, D13 |
| 3 | Solar_Cell | Fiozera:SM141K08LV | SC11, SC12, SC13 |
| 3 | TPS73533DRBR | SamacSys_Parts:TPS73533DRBR | IC1, IC2, IC3 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C19, C20 |
| 2 | 10pF/50V | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C27, C46 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C21, C22 |
| 2 | 4K7 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 505110-0697 | SamacSys_Parts:5051100692 | U4, U9 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R28, R29 |
| 2 | LOGO | kicad:fiozera_logo_small | G***, G*** |
| 2 | SW_SPDT | Fiozera:D2F-L2-A1 | SW4, SW5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 110k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 150uF/6.3V | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W | C29 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R83 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 1R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R32 |
| 1 | 22uH | Inductor_SMD:L_6.3x6.3_H3 | L6 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | 4.87M | Resistor_SMD:R_0402_1005Metric | R42 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 499k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 8.2M | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | AO3401A | digikey-footprints:SOT-23-3 | Q6 |
| 1 | ATSAMD21G-A | Package_QFP:TQFP-48_7x7mm_P0.5mm | U1 |
| 1 | BSS138 | digikey-footprints:SOT-23-3 | Q4 |
| 1 | Battery_Cell | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT1 |
| 1 | CHRG | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J9 |
| 1 | Conn_01x06 | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J7 |
| 1 | GTFH08131YHR | SamacSys_Parts:GTFH08131YHR | J6 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-HandSoldering | USB1 |
| 1 | MCP73831 | Silicon-Standard:SOT23-5 | U6 |
| 1 | MPU-9250 | Package_DFN_QFN:QFN-24-1EP_3x3mm_P0.4mm_EP1.75x1.6mm | U5 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | Q_NMOS_DGS | Fiozera:RUL035N02FRATR | Q8 |
| 1 | RFM98PW | Fiozera:RFM95PW | U10 |
| 1 | SS34 | Diode_SMD:D_SMA | D14 |
| 1 | SW_DPST | Fiozera:SPPB530601 | SW1 |
More from fiozera/FZsatellite
1- 2 layers55 × 67.5 mm

Similar boards
- 4 layers90 × 95 mm

Wiegand bridge
EdgeCoil/wiegand-bridge
ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.
197 parts1 - 2 layers150 × 40 mm

- 2 layers57 × 24 mm

Power supply
martinquattro/SmartAquariumGuardian
Smart Aquarium Guardian is an ESP32-based IoT aquarium monitoring and automation system for hobbyists and small-scale aquariums.
36 parts1MIT - 2 layers100 × 73.9 mm

Security Alarm Panel
Matyas604/Security-Alarm-Panel
Home Assistant Smart Home Alarm Control Panel with fingerprint reader, NFC/RFID card reader, motion radar, and touchscreen TFT display. It can control your smart home, not just your home security system.
132 parts1GPL-3.0 - 4 layers72 × 44 mm

Picflash board
nthclrd/picflash
Programmeur PIC open source en Rust : remplace MPLAB IPE/XC8 pour les PIC16, pilote les PICkit 4/5/Basic ou une carte RP2040 maison (KiCad)
115 parts1MIT - 2 layers49.4 × 95.7 mm

- 2 layers98 × 56.3 mm

ESP32 HUB
ANSHUMANDOCX/ESP32-Touch-Hub
This is a Esp32 Hub that has a 3.5 inch tft touch screen
77 parts - 2 layers29 × 39.5 mm

LiPo Charge Boost
buzzwordExpert/LiPo-Charging-and-5V-Boost-
1S LiPo Charging and 5V Boost PCB
23 partsMIT
Questions
How big is the PANEL COMPLETE PCB?
It measures 130 × 190 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PANEL COMPLETE use?
287 parts, built around the MT3608, TEMT6000X01, TPS73533DRBR and MCP73831. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PANEL COMPLETE KiCad files?
From the fiozera/FZsatellite repository on GitHub, at the commit this page was made from: the board is kicad_files/PANEL-COMPLETE.kicad_pcb and its schematic bs_transceiver/bs_transceiver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PANEL COMPLETE design in my own project?
Its repository states no licence, so its author keeps all rights: ask fiozera before reusing the design.