

Pwm protecao
PCB sample for prototypes
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 37
- Pads
- 120
- Tracks, vias
- 218, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jun 2019
- Updated
- 17 Apr 2022
Overview
Pwm protecao is an open-source printed circuit board by fgl27, from the fgl27/pcb repository on GitHub. It is a 2-layer board with 44 parts on 37 nets, routed with 218 tracks and 0 vias.
It is built around the BT151, TL081 and NE555, with the PN2222A and BC556 among its other parts. Its parts include 15 resistors, 8 capacitors, 7 diodes, 5 ICs and 3 transistors.
Main components
5BT151
TO-252-40℃~+125℃ 1 SCR 1.5V 1.75V 120A 12A 30mA 500mW 800V TO-252 Thyristors (SCR)/Modules ROHSWEIDAThyristors (SCR)/ModulesTL081
SOP-8-18V~18V -20℃~+85℃ 1 1.8mA 100pA 200nA 20V/us 3MHz 3mV 85dB Built-in compensation SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierNE555
SOP-8-20℃~+70℃ 1 1.5mA 200mA 4.5V~15V Adjustable duty cycle oscillation、Reset function、Duty cycle stabilization SOP-8 555 Timers / Counters ROHSGRTimers / CountersPN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)BC556
TO-92-55℃~+150℃ 1 PNP 100mA 100nA 150MHz 300mV 5V 625mW 65V 800 PNP TO-92 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdpcb
This is a collection of PCBs prototypes for projects that I have created off participated.
If anything here help you enjoy it.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C1, C2, C5, C7, C8 |
| 5 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5, R7, R12, R13 |
| 4 | DIODE | Diode_THT:D_5KP_P12.70mm_Horizontal | D3, D4, D5, D6 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R14, R15 |
| 3 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J_in2, J_in3, J_out_lampada1 |
| 2 | 10n | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C4, C6 |
| 2 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R11 |
| 2 | 4N25 | Package_DIP:DIP-6_W7.62mm | U2, U3 |
| 2 | DIODE | Diode_THT:D_DO-41_SOD81_P12.70mm_Horizontal | D1, D2 |
| 2 | NE555 | Package_DIP:DIP-8_W7.62mm_LongPads | U1, U5 |
| 2 | PN2222A | Package_TO_SOT_THT:TO-92_Wide | Q2, Q3 |
| 2 | Screw_Terminal_01x02 | Connector_BarrelJack:BarrelJack_Horizontal | J_in1, J_in4 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 4.7n | Capacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mm | C3 |
| 1 | 40k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | BC556 | Package_TO_SOT_THT:TO-92_Wide | Q1 |
| 1 | BT151 | Package_TO_SOT_THT:TO-220-3_Vertical | D7 |
| 1 | POT_10k | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | TL081 | Package_DIP:DIP-8_W7.62mm_LongPads | U4 |
More from fgl27/pcb
12- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

- 2 layers

Similar boards
- 2 layers98 × 83.5 mm

- 2 layers28.7 × 31.5 mm

- 2 layers206.1 × 150.5 mm

- 2 layers

- 2 layers52.4 × 78.4 mm

- 2 layers45.7 × 19.8 mm

- 2 layers74.9 × 89.2 mm

Pictas
bigbass1997/PICTAS
Low-cost replay device for playing back Tool Assisted Speedruns on real hardware
37 parts9 - 2 layers66.7 × 36.8 mm

Kick
Wesemane-Industries/808-kick-eurorack
808 kick (bass drum) for eurorack / modular synth
57 parts8GPL-3.0
Questions
What parts does the Pwm protecao use?
44 parts, built around the BT151, TL081, NE555 and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pwm protecao KiCad files?
From the fgl27/pcb repository on GitHub, at the commit this page was made from: the board is pwm_protecao/pwm_protecao.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pwm protecao design in my own project?
Its repository states no licence, so its author keeps all rights: ask fgl27 before reusing the design.