2 layers96.6 × 82.8 mm
2 layers183.2 × 167 mm
Starbie project
festy-ay/StarbieStar-shaped ESP32-C3 PCB with OLED, MPU6050 and DHT11
- Size
- 183.2 × 167 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 28
- Pads
- 74
- Tracks, vias
- 56, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Oct 2026
- Updated
- 13 Oct 2026
Overview
Starbie project is an open-source printed circuit board by festy-ay, from the festy-ay/Starbie repository on GitHub, published under the MIT licence. It is a 2-layer board of 183.2 × 167 mm with 14 parts on 28 nets, routed with 56 tracks and 3 vias.
It is built around the DHT11. Its parts include 4 switches, 3 connectors, 2 ICs, 1 capacitor and 1 resistor. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdStarbie
A star-shaped ESP32-C3 PCB with an OLED display, an MPU6050 motion sensor and a DHT11 sensor.
Credits
This project is based on the Starbie guide by SharKing Studios: https://github.com/SharKingStudios/Starbie
What I changed
- Added a battery connector and a slide switch
- Added a second reset button
- Added mounting holes
- Added silkscreen artwork (starfish and waves) and a "Starbie" label
What's in this repo
- KiCad files (.kicad_pro, .kicad_sch, .kicad_pcb)
- gerbers/ (manufacturing files)
- Imported Libraries (XIAO ESP32 Lbraries and co.)
- BOM.csv (parts list)
License
The original design belongs to its authors and is covered by its own license: https://github.com/SharKingStudios/Starbie/blob/main/LICENSE
The starfish designs were downloaded form online platforms and converted using Inkscape then imported into the project. The dowloaded art files (.png) and converted files (.svg) are not provided here but you can make your's and import it into the project!.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW4 |
| 1 | clipboard:6f57cabb-ce76-4e56-af91-3bb679e3161d | ||
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | Imported Parts:Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_Shouhan_MSK12C02 | SW3 |
| 1 | XIAO-ESP32-C3-SMD | Imported Parts:XIAO-ESP32-C3-SMD | U1 |
The 12 most common of 14 parts.
Questions
How big is the Starbie project PCB?
It measures 183.2 × 167 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starbie project use?
14 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starbie project KiCad files?
From the festy-ay/Starbie repository on GitHub, at the commit this page was made from: the board is Starbie by Festus/starbie project.kicad_pcb and its schematic Starbie by Festus/starbie project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starbie project design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5