2 layers70 × 100 mm
2 layers70 × 100 mm
BREAD Slice
feastorg/Slice_DCMT1DC Motor Driver Carrier Slice
- Size
- 70 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 41
- Pads
- 142
- Tracks, vias
- 193, 5
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 May 2024
- Updated
- 6 Nov 2026
Overview
BREAD Slice is an open-source printed circuit board by feastorg, from the feastorg/Slice_DCMT repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 70 × 100 mm with 30 parts on 41 nets, routed with 193 tracks and 5 vias.
It is built around the LMD18200T. Its parts include 10 capacitors, 9 connectors, 2 resistors and 2 ICs. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdDC Motor Driver IC Carrier
DC Motor Driver IC Carrier Slice for BREAD.
Introduction
[Short introduction on the project.]
Usage
[Explain how to use the project. Include examples and screenshots if applicable.]
Documentation
Please refer to the docs for more info.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10 nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6, C7, C8, C9, C10 |
| 4 | 10uF_t | OCI_UPL_FOOTPRINTS:C_2312 | C1, C2, C3, C4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 4 | Screw_Terminal_01x02 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J6, J7, J8, J9 |
| 2 | 2.2 k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
| 2 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1, A1 |
| 2 | Conn_01x03_Male | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4, J5 |
| 2 | LMD18200 | Package_TO_SOT_THT:TO-220-11_P3.4x5.08mm_StaggerOdd_Lead4.85mm_Vertical | U1, U2 |
| 2 | Screw_Terminal_01x04 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-4_1x04_P2.54mm_Horizontal | J2, J3 |
| 1 | Conn_01x10_Female | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Horizontal | J1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Symbol_6.7x6mm_SilkScreen | Logo1 |
Questions
How big is the BREAD Slice PCB?
It measures 70 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BREAD Slice use?
30 parts, built around the LMD18200T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BREAD Slice KiCad files?
From the feastorg/Slice_DCMT repository on GitHub, at the commit this page was made from: the board is archive/hw_archive/g1-2021-06-08-mtu/BREAD_Slice.kicad_pcb and its schematic archive/hw_archive/g1-2021-06-08-mtu/BREAD_Slice.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BREAD Slice design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from feastorg/Slice_DCMT
2- 2 layers70 × 100 mm
Similar boards
- 2 layers68.6 × 53.3 mm
Controller
Cemetech/TI-DCC
Direct z80 ASM DCC implementation for the TI-84 Plus C Silver Edition and similar calculators.
67 parts3BSD-3-Clause - 4 layers68.6 × 53.3 mm
Motor Shield v1
Pr0fiNoob/MopBot
MopBot ist ein experimenteller Bodenreinigungsroboter. Die Python-Software MopSlothOS läuft auf einem Raspberry Pi und übernimmt Navigation sowie die übergeordnete Steuerung.
30 parts3MIT - 2 layers94 × 78.7 mm
Base rulante lmdv2
ClubRobotInsat/cartes
Toutes les cartes ici sont les cartes en développement au club. Vous pouvez retrouver dans les release les cartes correspondant à chaque robot.
27 partsApache-2.0 - 2 layers
H bridge 2018
ClubRobotInsat/h_bridge_2018
The H bridge PCB we use to power and control our DC motors
12 parts - 2 layers144.8 × 111.8 mm
- 4 layers70 × 70 mm
Tank
frangipp/TANK-PCB
Projet étudiant réalisé en binôme à l’ESEO Angers, ce TANK est un robot mobile à entraînement différentiel, piloté en Bluetooth via une application Android.
163 parts - 2 layers105 × 70 mm
- 2 layers66 × 66 mm
