4 layers100 × 94 mm
2 layers50 × 18 mm
Can nano shield
feastorg/can-nano-shieldA compact Arduino Nano shield with MCP2515 & TJA1051/3 for easy CAN bus integration. Work-in-progress.
- Size
- 50 × 18 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 48
- Pads
- 102
- Tracks, vias
- 154, 17
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Mar 2025
- Updated
- 13 Jun 2026
Overview
Can nano shield is an open-source printed circuit board by feastorg, from the feastorg/can-nano-shield repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 18 mm with 24 parts on 48 nets, routed with 154 tracks and 17 vias.
It is built around the TJA1051T/3/1, SSQ-115-03-T-S and B82789C0113N002, with the PESD2CANFD24LT-Q among its other parts. Its parts include 5 capacitors, 4 connectors, 2 resistors, 2 ICs and 1 diode. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4TJA1051T/3/1
-- CAN Transceivers ROHSNXP SemiconductorsCAN Transceivers
SSQ-115-03-T-S
插件,P=2.54mmFemale HeadersSamtec
B82789C0113N002
SMD-4P,5.2x3.2mm-55℃~+125℃ 11uH@100kHz 2 250V 250mΩ 300mA 42V 80V SMD-4P,5.2x3.2mm Common Mode Filters ROHSTDKCommon Mode Filters
PESD2CANFD24LT-Q
SOT-23-3UncategorisedNexperia
README
README.mdcan-nano-shield
A compact Arduino Nano shield with MCP2515 & TJA1051/3 for easy CAN bus integration. Work-in-progress.
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP3, JP4, JP5 |
| 2 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 15p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 60 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | Rt1, Rt2 |
| 2 | SSQ-115-03-T-S | kml-custom:SAMTEC_SSQ-115-03-T-S | J1, J2 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 16MHz 9pF | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 4.7n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | B82789C0113N002 | kml-custom:SMT_13N002_TDK | T1 |
| 1 | Conn_01x03_Socket | Connector_JST:JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal | J4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 1 | PESD2CANFD24LT-Q | Package_TO_SOT_SMD:TSOT-23 | D1 |
| 1 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Val** | SparkFun-Aesthetic:OSHW_Logo_5mm | Ref** |
Similar boards
- 2 layers133 × 98 mm
Precharge
michaelruppe/FSAE
Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)
121 parts59MIT - 4 layers231 × 67 mm
- 2 layers50 × 66 mm
- 2 layers55.9 × 36.8 mm
CANT
bitbane/CANT
The CANT project is designed to allow people to screw around with CAN easily at layers 1/2. All of the stuff that is normally handled by a CAN controller that is baked into sillicon is up for grabs.
15 parts51BSD-3-Clause - 4 layers135 × 82.5 mm
- 2 layers115.2 × 78.6 mm
- 2 layers100 × 100 mm
Questions
How big is the Can nano shield PCB?
It measures 50 × 18 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Can nano shield use?
24 parts, built around the TJA1051T/3/1, SSQ-115-03-T-S, B82789C0113N002 and PESD2CANFD24LT-Q. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Can nano shield KiCad files?
From the feastorg/can-nano-shield repository on GitHub, at the commit this page was made from: the board is hardware/can-nano-shield.kicad_pcb and its schematic hardware/can-nano-shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Can nano shield design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).