2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0
2 layers
FuzzFace
fbernhar/pub_fuzzfaceFuzzyFacy
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 11
- Pads
- 32
- Tracks, vias
- 29, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 May 2026
- Updated
- 20 Jun 2026
Overview
FuzzFace is an open-source printed circuit board by fbernhar, from the fbernhar/pub_fuzzface repository on GitHub, published under the MIT licence. It is a 2-layer board with 21 parts on 11 nets, routed with 29 tracks and 0 vias.
Its parts include 4 resistors, 3 capacitors and 2 transistors.
README
src/kicad/pcb/material/README.mdNote
The AC128.MOD file was taken from a post by KiCad forum user invntefx:
https://forum.kicad.info/t/fuzz-face-tone-bender-projects-updated-05-22-23/41450
Please note that this file may be subject to its original author’s license or usage terms.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | IN+1, OUT-1, OUT+1, P1P1, P1P2, P1P3, P2P1, P2P2, P2P3 | |
| 2 | AC128 | Package_TO_SOT_THT:TO-18-3 | Q1, Q2 |
| 1 | +9V | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | Vout+9 |
| 1 | -9V | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | Vin-9 |
| 1 | 0.01uF | Capacitor_THT:C_Radial_D6.3mm_H5.0mm_P2.50mm | C3 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 2.2uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 20uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 33K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 8.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | ~ | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | IN-1 |
Questions
What parts does the FuzzFace use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FuzzFace KiCad files?
From the fbernhar/pub_fuzzface repository on GitHub, at the commit this page was made from: the board is src/kicad/pcb/material/FuzzFace.kicad_pcb and its schematic src/kicad/circuit/material/FuzzFace.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FuzzFace design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
