Skip to the content
2 layers92.7 × 75 mmWhite noise, the printed circuit board in 3D

A very simple white noise generator using an ESP32 (C3-SuperMini) and an audio amplifier. I made this to help me sleep. Its kinda hard for me to sleep, especially with noises, even if it is small.

Size
92.7 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
27
Pads
74
Tracks, vias
86, 3
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Jun 2026
Updated
2 Aug 2026

Overview

White noise is an open-source printed circuit board by FazalThe, from the FazalThe/white-noise repository on GitHub. It is a 2-layer board of 92.7 × 75 mm with 26 parts on 27 nets, routed with 86 tracks and 3 vias.

It is built around the AP2112K-3.3. Its parts include 5 capacitors, 3 resistors, 3 ICs, 1 diode and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.

Main components

1

README

readme.md

White Noise Machine

Alt text

A very simple white noise generator using an ESP32 (C3-SuperMini) and an audio amplifier. I made this to help me sleep. Its kinda hard for me to sleep, especially with noises, even if it is small. White/pink noise is more comfortable for me. Also this will help blockout small noises


Enclosure

Case


PCB

PCB Layout


Schematic

Schematic


BOM

QtyComponentNotesLink
1ESP32 Super MiniMicrocontrollerhttps://robocraze.com/products/esp32-c3-mini-development-board-unsoldered?variant=48465411506400
18 Ω 1 W Speaker (35 mm diameter)Speakerhttps://quartzcomponents.com/products/0-5w-speaker-8-ohm-large?variant=36014183022745&country=IN&currency=INR&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&srsltid=AfmBOopAwl-McXb629Uy8SUohOU4_S37xz01wkD58gYBX4n-Car-ZNXvRJ8
1MAX98357A Audio Amplifier Breakout BoardI2S Class-D amplifierhttps://robu.in/product/smartelex-i2s-audio-breakout-max98357a/
1MCP73831Li-ion/Li-Po charging IChttps://robu.in/product/mcp73831t-2dci-ot-microchip-battery-charger-for-1-cell-of-li-ion-li-pol-battery-6v-input-4-2v-500ma-charge-sot-23-5/?gad_source=1&gad_campaignid=17427802703&gbraid=0AAAAADvLFWesxIAOGtdsLwCo2hYp3UC-9&gclid=CjwKCAjwxb7RBhA5EiwAQ-AAdITzA1JCzwghQRx5ZseV6wuH4NPsH6kC6K0IZD4zEoA-meBtaPgDHBoC4-0QAvD_BwE
1AP1221K 3.3 V3.3 V LDO voltage regulatorhttps://robu.in/product/ap2202k-3-3trg1-diodes-inc-ldo-fixed-3-3v-0-15a-40-to-125deg-c/
1100 kΩ Horizontal PotentiometerVolume controlhttps://robu.in/product/100k-ohm-3pin-15mm-shaft-potentiometer-pack-of-3/
110 µF Capacitorhttps://robu.in/product/50yxf10mffc5x11-rubycon-10uf-50v-%c2%b120-plugind5xl11mm-aluminum-electrolytic-capacitors-leaded-rohs/
21 µF Capacitorhttps://robu.in/product/ers1hm010d11ot-aishi-1uf-50v%c2%b120-plugind5x11mm-aluminum-electrolytic-capacitors-leaded-rohs/
14.7 µF Capacitorhttps://robu.in/product/50yxf4r7mefct15x11-rubycon-4-7uf-50v-%c2%b120-plugind5xl11mm-aluminum-electrolytic-capacitors-leaded-rohs/
11 kΩ Resistorhttps://robocraze.com/products/1k-resistor-pack-of-10?variant=40194234155161
12 kΩ Resistorhttps://robocraze.com/products/2-2k-ohm-resistor-pack-of-10?variant=40194236743833
110 kΩ Resistorhttps://robocraze.com/products/10k-resistor-pack-of-10?variant=40194231304345
118650 Dual SMD Battery Holderhttps://robocraze.com/products/18650-smd-smt-dual-battery-holder?variant=41351705100441
4M2 × 3 mm Heat-Set Inserthttps://onlyscrews.in/products/m2-x-3mm-brass-threaded-inserts?variant=49728872448313
4M2 × 6 mm Heat-Set Inserthttps://onlyscrews.in/products/m2-x-6mm-brass-threaded-inserts?variant=49423242101049
4M2 × 8 mm Screwhttps://onlyscrews.in/products/m2-x-8mm-hex-allen-button-head-ss-304-screw-dia-2mm-length-8mm?variant=50900339851577
4M2 × 10 mm Screwhttps://onlyscrews.in/products/m2-x-10mm-hex-allen-button-head-ss-304-screw-dia-2mm-length-10mm?variant=50900340801849

How to assemble

  1. Insert the 3mm insert on the walls projected from the middle part, and 6mm on the bottom part
  2. screw pcb on to the bottom of the middle part
  3. screw the middle to the bottom
  4. screw the top to the middle with screws on the walls

How to Flash

Prerequisites

  • Python 3
  • esptool

Flash Firmware

  1. Clone the repository.
  2. Open the build folder inside the firmware folder in terminal.
  3. Connect the ESP32-C3 to your computer and run:
bash
esptool.py --chip esp32c3 --baud 460800 write_flash \
  0x0000 bootloader.bin \
  0x8000 partitions.bin \
  0xE000 boot_app0.bin \
  0x10000 firmware.bin

Parts

26
QtyValueFootprintReferences
5MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4, H5
21uCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC4, C5
2MOUNTINGHOLE2.5MOUNTINGHOLE_2.5_PLATEDU$9, U$10
11X07_ROUND_76JP1
1TERMBLOCK_1X2-3.5MMX1
1SYMBOL_PLUSU$6
1SYMBOL_MINUSU$11
10.1uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC1
11048Pbattery holder:BAT_1048PBT1
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
110uCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC2
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
12kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
14.7uCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC3
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U2
1Conn_01x02_PinConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ1
1ESP32-C3_SUPERMINI_THkicad:MODULE_ESP32-C3_SUPERMINI_THU1
1GRNLED_THT:LED_D5.0mmD2
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U3
1R_Potentiometerpotentiometer:TRIM_WH148-1A-2-18T-L20RV1

Similar boards

  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 2 layers53.2 × 24.8 mmPicoLink, the printed circuit board in 3D

    PicoLink

    ErichStyger/mcuoneclipse

    McuOnEclipse projects and examples

    46 parts765
  • 2 layers36 × 20 mmCombined, the printed circuit board in 3D

    Combined

    adamb314/ServoProject

    Getting the most out of your hobby servo

    24 parts545
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 4 layers70 × 72 mmSPINC AA Charger, the printed circuit board in 3D

    SPINC AA Charger

    CoretechR/SPINC

    DIY Automatic Battery Charger Using RP2040

    101 parts467GPL-3.0
  • 4 layers60.8 × 61.3 mmOS3M Mouse, the printed circuit board in 3D

    OS3M Mouse

    spoter368/os3m-hardware

    All the hardware needed to build your own OS3M Mouse!

    51 parts399
  • 4 layers74 × 104 mmBeepy, the printed circuit board in 3D

    Beepy

    sqfmi/beepy-hardware

    Beepy Hardware

    160 parts348MIT

Questions

How big is the White noise PCB?

It measures 92.7 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the White noise use?

26 parts, built around the AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the White noise KiCad files?

From the FazalThe/white-noise repository on GitHub, at the commit this page was made from: the board is PCB/White noise.kicad_pcb and its schematic PCB/White noise.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the White noise design in my own project?

Its repository states no licence, so its author keeps all rights: ask FazalThe before reusing the design.