
3S coinCellChargeController
PocketConcepts/Pocket_PSU
A variable current & voltage PSU with 3S lipo charging, balancing, and protection circuit using PPS.

The Stillness Detector senses presence and motion to determine if there is a person standing in front of it and whether that person is currently standing still.
Stillness detector is an open-source printed circuit board by faludi, from the faludi/stillness-detector repository on GitHub, published under the MIT licence. It is a 2-layer board of 70.5 × 49 mm with 24 parts on 49 nets, routed with 205 tracks and 12 vias.
It is built around the DMG2301L and MMBT3904. Its parts include 10 resistors, 5 connectors, 3 diodes and 2 transistors. It belongs with the RP2040 boards of this library.
The Stillness Detector senses presence and motion to determine if there is a person standing in front of it and whether that person is currently standing still. It is intended to provide a trigger to interactive art pieces that require stillness rather than action from the viewer.
See the DOCUMENTATION for more information.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 5.1k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R7, R8, R9, R10 |
| 3 | 220 | Resistor_SMD:R_1206_3216Metric | R1, R4, R5 |
| 2 | 4.7k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R2, R3 |
| 2 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J3, J4 |
| 1 | 330 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R6 |
| 1 | DMG2301L | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | LED-G | LED_SMD:LED_1206_3216Metric | D3 |
| 1 | LED-R | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | LED-Y | LED_SMD:LED_1206_3216Metric | D4 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | PIR Sensor Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J1 |
| 1 | Qwiic_RA | PCM_SparkFun-Connector:JST_1x04_P1.0mm_Horizontal_SMD | J2 |
| 1 | RaspberryPi_Pico_W | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-4P_1x04_P2.54mm_Horizontal | J5 |
The 21 most common of 24 parts.

PocketConcepts/Pocket_PSU
A variable current & voltage PSU with 3S lipo charging, balancing, and protection circuit using PPS.

TobleMiner/catear-pcb
This repo contains the PCB for the Nekomimi project of @BenBE . It will be used to illuminate 3D printed catears.


kaorii-ako/Poket
ESP32-S3 Bluetooth MP3 player - custom PCB + 3D-printed case, built from scratch


brown-studios/minuet
Minuet upgrades your MAXXAIR Maxxfan with a brushless DC motor, home automation features, and accessories.

kiu/kha
Overengineered Modular RS-485 Multi-Master 19" Subrack Home Automation / Control

rohamid/lcd-east-rising-backpack
PCB controller backpack for east rising LCD modules
It measures 70.5 × 49 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the DMG2301L and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the faludi/stillness-detector repository on GitHub, at the commit this page was made from: the board is hardware/stillness-detector.kicad_pcb and its schematic hardware/stillness-detector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).