
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

This is a repo for an 8 step analog sequencer project in Eurorack format
ROND - PCB is an open-source printed circuit board by faiseur-cz, from the faiseur-cz/ROND-sequencer repository on GitHub. It is a 2-layer board of 100 × 114 mm with 116 parts on 97 nets, routed with 794 tracks and 99 vias.
It is built around the TL072 and SR1712F-0108-20F0A-N9-N-027. Its parts include 37 resistors, 29 diodes, 12 switches, 9 capacitors and 8 transistors. It belongs with the audio and music boards of this library.
WARNING : It has been reported on modwiggler that this circuit is NOT OK!!! So please, check the forum. There were some solutions given. Right now i will not take the time needed to redo everything, because it would need some global redesign, and this project is not a priority for me. Feel free to do it and write me directly or on the forum, it would be great!
Original description : I finished the design and built a couple of them, all works as it should. So you can use the gerbers to make your own version.
There is a thread on modwiggler if you have any question : https://modwiggler.com/forum/viewtopic.php?t=284588
ROND is an 8 step analog sequencer, kind of augmented (and circular!) baby8
CALIBRATION PROCEDURE :
| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3, D11, D13, D14, D15, D16, D19, D20, D21, D22, D23, D24, D27, D28, D29, D30 +5 |
| 16 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R5, R6, R7, R10, R11, R12, R13, R15, R16, R20, R25, R27, R28 |
| 11 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18, R23, R26, R29, R30, R31, R32, R33, R34, R35, R36 |
| 8 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | B100k | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 |
| 8 | LED | LED_THT:LED_D3.0mm | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 8 | SMTS-201 | SMTS submini toggle switch SPDT pcb mount - 2MS1T1B1M2QES:SW_2MS1T1B1M2QES | SW1, SW2, SW4, SW5, SW6, SW7, SW8, SW9 |
| 5 | PJ3001F | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | CLOCK_IN1, CLOCK_OUT1, CV_OUT1, GATE_OUT1, RESET_IN1 |
| 4 | 100nf | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C6, C7, C8, C9 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9 |
| 2 | 47uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4, C5 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R37 |
| 1 | 18k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R22 |
| 1 | 1nf | Capacitor_THT:C_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C3 |
| 1 | 1uf | Capacitor_THT:C_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1 |
| 1 | 220nf | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 2k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | R21 |
| 1 | 33k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 4017 | Package_DIP:DIP-16_W7.62mm_Socket | U4 |
| 1 | 51k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
| 1 | 5k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | R14 |
| 1 | 5v/2.5v | SMTS submini toggle switch SPDT pcb mount - 2MS1T1B1M2QES:SW_2MS1T1B1M2QES | SW10 |
| 1 | 6.8k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R24 |
| 1 | 68k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R19 |
| 1 | B250k-1M | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV9 |
| 1 | LOGO | LOGOS:1cm LOGO neg kicad | G*** |
| 1 | LOGO | LOGOS:2cm LOGO kicad | G*** |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1 |
| 1 | POWER | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | SR1712F-0108-20F0A-N9-N-027 | Rotary Switch PCB:SR1712F010820F0AN9N027 | S1 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket | U3 |
| 1 | next step | Push Switch PCB:D6F90F1LFS | SW3 |
| 1 | run/tune | SMTS submini toggle switch SPDT pcb mount - 2MS1T1B1M2QES:SW_2MS1T1B1M2QES | SW11 |

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 100 × 114 mm and has 2 copper layers, 1.6 mm thick.
116 parts, built around the TL072 and SR1712F-0108-20F0A-N9-N-027. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the faiseur-cz/ROND-sequencer repository on GitHub, at the commit this page was made from: the board is ROND - PCB/ROND - PCB.kicad_pcb and its schematic ROND - PANEL/ROND - PANEL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask faiseur-cz before reusing the design.