
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

This repository contains all the university proyects done through my career and extracurricular laboratory.
Tc2 labo kicad is an open-source printed circuit board by FacundoCostarelli, from the FacundoCostarelli/University_Projects repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 34 parts on 20 nets, routed with 236 tracks and 0 vias.
It is built around the LM324. Its parts include 16 resistors, 8 capacitors, 4 connectors and 2 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_THT:C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C3, C4, C5, C6, C7, C8 |
| 5 | 2k2 | Resistor_SMD:R_1206_3216Metric | R1, R5, R6, R12, R16 |
| 4 | 1k | Resistor_SMD:R_1206_3216Metric | R7, R8, R13, R14 |
| 4 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV3, RV4 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J2, J3, J4 |
| 2 | 220 | Resistor_SMD:R_1206_3216Metric | R2, R11 |
| 2 | 390 | Resistor_SMD:R_1206_3216Metric | R3, R4 |
| 2 | C_Polarized | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1, C2 |
| 2 | LM324 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | 1K2 | Resistor_SMD:R_1206_3216Metric | R10 |
| 1 | 1k8 | Resistor_SMD:R_1206_3216Metric | R15 |
| 1 | 2k | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Altech:Altech_AK100_1x03_P5.00mm | J1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!




corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support

schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers
34 parts, built around the LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FacundoCostarelli/University_Projects repository on GitHub, at the commit this page was made from: the board is Analysis_Work/ENG/Design_Simulation_&_Analysis_Of_Analog_Circuits/4_Active_Analog_Filter/KicadDesign/tc2_labo_kicad.kicad_pcb and its schematic Analysis_Work/ENG/Design_Simulation_&_Analysis_Of_Analog_Circuits/4_Active_Analog_Filter/KicadDesign/tc2_labo_kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).