
Smartcitizen adc-4-ch
fablabbcn/smartcitizen-analog-sensor-board
Analog sensor board to expand the Smart Citizen Kit

Analog sensor board to expand the Smart Citizen Kit
Smartcitizen adc-8ch step is an open-source printed circuit board by fablabbcn, from the fablabbcn/smartcitizen-analog-sensor-board repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 42.4 × 44.1 mm with 46 parts on 25 nets, routed with 450 tracks and 33 vias.
It is built around the ADS1115IDGSR. Its parts include 10 capacitors, 10 resistors, 4 ICs, 3 connectors and 2 diodes.
This repository contains a set of boards that can interface the Smart Citizen Kit in different ways.
See the docs at: https://docs.smartcitizen.me/hardware/boards/analog-sensor-board/


The SmartCitizen ASB is an expansion board for the Smart Citizen Kit that provides connectivity to analog sensors with a high precission ADS1115 via I2C, with four configurable addresses. Daisy chainable up to 4 boards (or 2 in 8ch version) - with a total of 16 analog channels.
| Variant | # of Channels | External AREF needed | ADS format |
|---|---|---|---|
| 4-channel | 4 | Y | SMD or shield by adafruit |
| 8-channel-step | 8 | N | SMD |
Natively operates at 3.3V, but can use also up to 5.5V in EXT-V, and with a selectable jumper. It integrates a level-shifter from the GROVE connector's voltage to EXT-V.
I2C, from 3.3V up to 5.5V.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 4 | PINHD-1x06-HEADER | Connector_Molex:Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | M1, M2, M3, M4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C9, C13 |
| 3 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C8, C12 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 1.5kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1, FB2 |
| 2 | 1kΩ | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | ADS1115IDGSR | Package_SO:TSSOP-10_3x3mm_P0.5mm | U1, U2 |
| 2 | J3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP2, JP4 |
| 2 | NMOSFETSOT23 | fab-SOT-23 | T1, T2 |
| 1 | 100nF | fab-C1206FAB | C11 |
| 1 | 330nF | fab-C1206FAB | C10 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.00mm:PinSocket_2x05_P2.00mm_Vertical | J5 |
| 1 | GROVE1 | OPL_Connector:HW4-SMD-2.0-90D | J1 |
| 1 | GROVE2 | OPL_Connector:HW4-SMD-2.0-90D | J2 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Symbol_6.7x6mm_SilkScreen | OSH1 |
| 1 | PJ78605SA | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | RED_LED | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | RO3.3-9S | Converter_DCDC:Converter_DCDC_RECOM_RO_3.309S | U4 |
| 1 | WHITE_LED | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | fablab | logos:fablab | LO2 |
| 1 | smartcitizen | logos:smartcitizen | LO1 |

fablabbcn/smartcitizen-analog-sensor-board
Analog sensor board to expand the Smart Citizen Kit

Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.


codetiger/PowerTiger
Home power monitoring system - Monitoring energy consumption with better granularity



AndreiVladescu/LibrePLC32
The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.

andremdaraujo/EMBARCADOS-CURSO-PCB
Projeto desenvolvido durante o curso Projeto de PCB para Sistemas Embarcados

bryce-builds/PiGarage
Open-source Raspberry Pi power management and audio HAT for automotive head-unit use
It measures 42.4 × 44.1 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the ADS1115IDGSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fablabbcn/smartcitizen-analog-sensor-board repository on GitHub, at the commit this page was made from: the board is 8-channel/smartcitizen-adc-8ch-step.kicad_pcb and its schematic 8-channel/smartcitizen-adc-8ch-step.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).