2 layers100 × 75 mm
RTSS Power Supply V2-5C
RadioThermal/RadioThermal_Soldering_OSHW
Open Source Hardware 470KHz Induction Soldering Iron
69 parts84CERN-OHL-P-2.0
2 layers45 × 53 mm
Telecommande
f1iwq2/nice_flor-s_decoder_for_pic2nice flor-s decoder remotes for pic
- Size
- 45 × 53 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 36
- Pads
- 150
- Tracks, vias
- 341, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 31 May 2025
- Updated
- 21 Oct 2026
Overview
Telecommande is an open-source printed circuit board by f1iwq2, from the f1iwq2/nice_flor-s_decoder_for_pic repository on GitHub. It is a 2-layer board of 45 × 53 mm with 46 parts on 36 nets, routed with 341 tracks and 8 vias.
It is built around the L7812, ATX203 and BS170. Its parts include 11 connectors, 9 resistors, 8 capacitors, 7 diodes and 4 ICs. It belongs with the PIC boards of this library.
Main components
3
L7812
TO-220ST0℃~+125℃@(Tj) 1 1.2A 12V 2V@(1A) 30V 71dB@(120Hz) 76uV Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ATX203
DIP,7.4x15mmDIP,7.4x15mm Signal Relays ROHSPanasonicSignal Relays
BS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETs
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C5, C6, C7, C8 |
| 4 | 90 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6, R7 |
| 3 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3, J10, J11 |
| 2 | 15pF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C3 |
| 2 | 1N4004 | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_KathodeUp | D2, D6 |
| 2 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R3 |
| 2 | 8,2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J6, J7 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P12.70mm_Horizontal | D1 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D7 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P3.81mm_Vertical_AnodeUp | D5 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D3 |
| 1 | 24LC1026-I_P | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U3 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | ATX203 | Relay_THT:Relay_DPDT_Kemet_EC2 | K1 |
| 1 | BS170 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | Conn_01x01_Male | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J8 |
| 1 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x06_Male | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Crystal 16MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | L7812 | Package_TO_SOT_THT:TO-220-3_Vertical | U4 |
| 1 | L78L05_TO92 | Package_TO_SOT_THT:TO-92_Inline_Wide | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D4 |
| 1 | PIC18F26K80_ISS | Package_DIP:DIP-28_W7.62mm_Socket_LongPads | U2 |
| 1 | SW_MEC_5E | Button_Switch_SMD:SW_SPST_Omron_B3FS-101xP | SW1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
Similar boards
- 2 layers59.8 × 62 mm
- 2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers140 × 75 mm
- 2 layers82.8 × 73.2 mm
- 2 layers90 × 99.9 mm
HF PA v10
kholia/Global-Communications-Transceiver
Open-source files for Global Communications Transceiver
102 parts6GPL-3.0 - 2 layers40.3 × 44.2 mm
MiniWhip
oe2lsp/miniWhip
miniWhip Antenna, E-Field Antenna, capacitive antenna, DXLwhip, DXL-miniWhip, DXLminiWhip
41 parts6GPL-2.0 - 2 layers116.8 × 61 mm
FullCapacitorBankAdapter
gongminmin/ImpulseDrive
A preliminary design of a plasma engine for spacecraft propulsion
45 parts4MIT
Questions
How big is the Telecommande PCB?
It measures 45 × 53 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Telecommande use?
46 parts, built around the L7812, ATX203 and BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Telecommande KiCad files?
From the f1iwq2/nice_flor-s_decoder_for_pic repository on GitHub, at the commit this page was made from: the board is telecommande/telecommande.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Telecommande design in my own project?
Its repository states no licence, so its author keeps all rights: ask f1iwq2 before reusing the design.