2 layers192.4 × 50 mm
2 layers19 × 33 mm
LiPo module
f0x52/LiPo-module1- Size
- 19 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 22
- Pads
- 88
- Tracks, vias
- 133, 11
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Nov 2019
- Updated
- 5 Nov 2019
Overview
LiPo module is an open-source printed circuit board by f0x52, from the f0x52/LiPo-module repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 19 × 33 mm with 27 parts on 22 nets, routed with 133 tracks and 11 vias.
It is built around the DW01A, FS8205A and TP4056. Its parts include 10 resistors, 7 connectors, 3 capacitors, 3 ICs and 2 diodes. It belongs with the power boards of this library.
Main components
3
DW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x01_Male | Connector_Pin:Pin_D1.0mm_L10.0mm | J2, J3, J4, J5, J6, J7 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 0.4 | Resistor_SMD:R_1210_3225Metric | R6 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 2.2K | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 2K | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | Battery | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | BT1 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | FS8205A | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U3 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm_ThermalVias | U1 |
| 1 | USB-C_Power | otters:USB-C_Power | J1 |
Questions
How big is the LiPo module PCB?
It measures 19 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LiPo module use?
27 parts, built around the DW01A, FS8205A and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LiPo module KiCad files?
From the f0x52/LiPo-module repository on GitHub, at the commit this page was made from: the board is LiPo-module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LiPo module design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers52.5 × 28 mm
- 2 layers100 × 90 mm
AudMix
I-AM-ENGINEER/AudMX
Alternative for Deej ( https://github.com/omriharel/deej ) with more features
85 parts12 - 4 layers53 × 33 mm
LiPo BuckBoost Charger
potpurri/LiPo_Charger_TP4056_BuckBoost_TPS63020
This PCB is designed to safely charge a lithium-ion cell and provide a selectable 3.3V or 5V output. It's equipped with components that ensure safe charging and protection for the battery and supports flexible output…
63 parts9Apache-2.0 - 2 layers35 × 100 mm
WalkieTalkie
GuzziFlipFlops/ESP32-Walkie-Talkie
An open source ESPNOW based walkie talkie with a 600 meter tested distance, with an OLED and multiple buttons to interact with
66 parts7MIT - 2 layers96.2 × 62.4 mm
- 2 layers30 × 100 mm
Moskill
telagod/moskill
MosKill - Smart Mosquito Swatter with BLE, Kill Counting & Statistics | ESP32-C3 + KiCad PCB + UniApp
95 parts2 - 4 layers76.1 × 25.4 mm
