2 layers40 × 11 mm
2 layers98 × 57 mm
PatientMonitor
f-zhuk/PatientMonitor- Size
- 98 × 57 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 52
- Pads
- 170
- Tracks, vias
- 458, 54
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Jun 2024
- Updated
- 20 Jul 2024
Overview
PatientMonitor is an open-source printed circuit board by f-zhuk, from the f-zhuk/PatientMonitor repository on GitHub. It is a 2-layer board of 98 × 57 mm with 43 parts on 52 nets, routed with 458 tracks and 54 vias.
It is built around the 74HC14, LM1117DT-3.3 and TP4056. Its parts include 15 resistors, 11 connectors, 7 capacitors and 3 ICs.
Main components
3
74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInverters
LM1117DT-3.3
TO-2520℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
README
README.mdPatientMonitor
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R7, R8, R12, R13, R14, R15 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C6, C7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 3 | Conn_01x01 | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J7, J8, J9 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10 |
| 2 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5, J10 |
| 2 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J1, J6 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H5, H6 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 74HC14 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U3 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J11 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Conn_01x14 | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J3 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1 |
More from f-zhuk/PatientMonitor
1Similar boards
- 4 layers108.5 × 95.8 mm
- 4 layers98.5 × 88.5 mm
- 2 layers231 × 126.8 mm
Esquematico HealthBand
impatrq/healthband
La incorporación de un Bot de Telegram 💬 permitirá recibir alertas, consultar el estado de salud e información general.
96 parts - 2 layers51.3 × 41.6 mm
Prueba 1 Pulsera
impatrq/aeroalert
Aeroalert es un prototipo de sistema de emergencia para aeronaves basado en el monitoreo constante de parámetros de salud de los pilotos para prevenir accidentes aeronauticos.
10 parts3 - 2 layers78 × 84 mm
- 2 layers55 × 55 mm
ControlBoard
Deni90/singleDigitNixieClock
A small project that combines ESP32 with a vintage Soviet Nixie tube from the 70’ to create an artistic clock. Originally developed on ESP8266/Arduino, now evolved to ESP32 with ESP-IDF for greater performance and…
39 parts5MIT - 2 layers139.7 × 114.3 mm
Self balancing robot
K0nradG/self-balancing-robot
Self-balancing robot powered by nRF52840 and Zephyr RTOS, with BLE control, OTA updates, and a Raspberry Pi camera interface designed for future autonomous navigation.
36 parts4Apache-2.0 - 2 layers99.8 × 60.2 mm
Irrigation IoT
VictorRavani/Irrigation_IoT
This project covers the complete development of Hardware and Firmware for IoT-based supervisory control. It offers all the necessary information and resources so that anyone can set up the system independently.
79 parts4MIT
Questions
How big is the PatientMonitor PCB?
It measures 98 × 57 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PatientMonitor use?
43 parts, built around the 74HC14, LM1117DT-3.3 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PatientMonitor KiCad files?
From the f-zhuk/PatientMonitor repository on GitHub, at the commit this page was made from: the board is Electronics/PatientMonitor.kicad_pcb and its schematic Electronics/ButtonBreakout/PatientMonitorButtons/PatientMonitorButtons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PatientMonitor design in my own project?
Its repository states no licence, so its author keeps all rights: ask f-zhuk before reusing the design.