Skip to the content
2 layersReceiverSampleBoard, the printed circuit board in 3D

ReceiverSampleBoard

f-zhuk/Tacho3

ER11 spindle tachometer with rotating display output

Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
9
Pads
23
Tracks, vias
37, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
22 Jan 2024
Updated
30 Mar 2026

Overview

ReceiverSampleBoard is an open-source printed circuit board by f-zhuk, from the f-zhuk/Tacho repository on GitHub. It is a 2-layer board with 10 parts on 9 nets, routed with 37 tracks and 0 vias.

It is built around the IRLML0030 and BAT54C. Its parts include 6 inductors, 2 transistors, 1 diode and 1 connector.

Main components

2

README

README.md

Tacho

ER11 spindle tachometer with rotating display output

Demonstration video: https://youtu.be/U8TMPHPOaX0?si=c8lLyx_i4HfSOsvz

Parts

10
QtyValueFootprintReferences
6LInductor_SMD:L_Bourns_SRN8040TAL1, L2, L3, L4, L5, L6
2IRLML0030Package_TO_SOT_SMD:SOT-23Q1, Q2
1BAT54CPackage_TO_SOT_SMD:SOT-23D1
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ1

More from f-zhuk/Tacho

2
  • 2 layers40 × 62.8 mmTacho, the printed circuit board in 3D

    Tacho

    f-zhuk/Tacho

    ER11 spindle tachometer with rotating display output

    33 parts3
  • 2 layers50.2 × 70 mmProg, the printed circuit board in 3D

    Prog

    f-zhuk/Tacho

    ER11 spindle tachometer with rotating display output

    6 parts3

Similar boards

  • 2 layers50 × 105 mmDot Matrix Terminal, the printed circuit board in 3D

    Dot Matrix Terminal

    f-zhuk/Dot-Matrix-Terminal

    Dot matrix printer driver board

    64 parts
  • 2 layers100 × 50 mmPY32F071R1BU6 EB, the printed circuit board in 3D

    PY32F071R1BU6 EB

    f-zhuk/PY32F071R1BU6-Evaluation-board

    Puya PY32F071R1BU6 evaluation board for small battery operated gadgets.

    69 parts
  • 6 layers80 × 80 mmEps, the printed circuit board in 3D

    Eps

    OSUSat/cubesat

    Open Source Earth Imaging Satellite Hardware + Firmware

    413 parts8MIT
  • 4 layers358 × 40 mmLongboi, the printed circuit board in 3D

    Longboi

    KungfuPancake/longboi

    Possibly the longest controller board to control the BoxTurtle AFC

    297 parts7Apache-2.0
  • 2 layers22.1 × 18 mmHelena base sd, the printed circuit board in 3D

    Helena base sd

    Reisi/Helena

    Helena is an alternative driver for the Yinding or KD2 Headlight Cycling Lamp.

    59 parts5BSD-2-Clause
  • 4 layers100 × 100 mmPS BPSLeader, the printed circuit board in 3D

    PS BPSLeader

    lhr-solar/PS-BPSLeader

    Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.

    388 parts3MIT
  • 2 layers59.1 × 75.7 mmPS MotorControllerInterfacePCB, the printed circuit board in 3D

    PS MotorControllerInterfacePCB

    lhr-solar/PS-MotorControllerInterfacePCB

    Provides power conversion/protection and fan control for the Prohelion WaveSculptor 22 motor controller

    127 parts3
  • 2 layers86.6 × 71.8 mmVehicleControlUnit, the printed circuit board in 3D

    VehicleControlUnit

    lhr-solar/VCAT-VehicleControlUnit

    Vehicle Control Unit (VCU) for the 2026 Longhorn Racing Solar car

    142 parts2MIT

Questions

What parts does the ReceiverSampleBoard use?

10 parts, built around the IRLML0030 and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ReceiverSampleBoard KiCad files?

From the f-zhuk/Tacho repository on GitHub, at the commit this page was made from: the board is ReceiverSampleBoard/ReceiverSampleBoard.kicad_pcb and its schematic Board/Tacho.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ReceiverSampleBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask f-zhuk before reusing the design.