4 layers100 × 100 mm
UzixLS pc kharon-386 kharon386 main 42508b
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
169 parts1
2 layers50 × 105 mm
Dot Matrix Terminal
f-zhuk/Dot-Matrix-TerminalDot matrix printer driver board
- Size
- 50 × 105 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 74
- Pads
- 252
- Tracks, vias
- 440, 14
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Mar 2024
- Updated
- 25 Jul 2024
Overview
Dot Matrix Terminal is an open-source printed circuit board by f-zhuk, from the f-zhuk/Dot-Matrix-Terminal repository on GitHub. It is a 2-layer board of 50 × 105 mm with 64 parts on 74 nets, routed with 440 tracks and 14 vias.
It is built around the ESP32-WROOM-32, CH340G and IRLML0030, with the BAT54C and BC817 among its other parts. Its parts include 21 resistors, 14 transistors, 8 capacitors, 8 connectors and 6 diodes. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
5
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
IRLML0030
SOT-23-55℃~+150℃ 1 N-channel 2.3V 2.6nC 27mΩ@10V 30V 382pF 39pF 5.3A SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdDot-Matrix-Terminal
Dot matrix printer driver board
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R10, R11, R12, R15, R16, R17, R18, R19 +1 |
| 12 | IRLML0030 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 6 | BAT54C | Package_TO_SOT_SMD:SOT-23_Handsoldering | D1, D2, D3, D4, D5, D6 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J6, J7, J8 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5 |
| 2 | 1000u | Capacitor_THT:C_Radial_D16.0mm_H25.0mm_P7.50mm | C7, C8 |
| 2 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21 |
| 2 | 20p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q14, Q15 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2 |
| 1 | 12MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | BOOT | USER:SW_SPST_CK_PTS641 | SW2 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J5 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Conn_01x17 | Connector_PinSocket_2.54mm:PinSocket_1x17_P2.54mm_Vertical | J2 |
| 1 | EN | USER:SW_SPST_CK_PTS641 | SW1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J1 |
Similar boards
- 2 layers177.8 × 175.3 mm
- 2 layers55 × 100 mm
- 2 layers140 × 100 mm
- 2 layers
Watch
KIIT-Robotic-Society/Dharma_RoboFest4.0
Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.
80 parts4MIT - 2 layers55 × 67.5 mm
- 4 layers77.9 × 81.6 mm
Lilygo
Ndambia/lilygo
A custom 4-layer KiCad PCB design integrating an ESP32 Wi-Fi/Bluetooth microcontroller with a SIM7600G-H 4G LTE Cat-4 cellular module, comprehensive power management, GPS tracking, GPRS connectivity, USB-C charging…
188 parts - 4 layers81.5 × 80 mm
Questions
How big is the Dot Matrix Terminal PCB?
It measures 50 × 105 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dot Matrix Terminal use?
64 parts, built around the ESP32-WROOM-32, CH340G, IRLML0030 and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dot Matrix Terminal KiCad files?
From the f-zhuk/Dot-Matrix-Terminal repository on GitHub, at the commit this page was made from: the board is Hardware_BRD/Dot-Matrix-Terminal/Dot-Matrix-Terminal.kicad_pcb and its schematic Hardware_BRD/Dot-Matrix-Terminal/Dot-Matrix-Terminal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dot Matrix Terminal design in my own project?
Its repository states no licence, so its author keeps all rights: ask f-zhuk before reusing the design.