
MicroNet Teensy4
Rodemfr/MicronetToNMEA
A NMEA 0183 converter for Raymarine's wireless instruments ... and much more !

CC1101 Driver for Raspberry Pi and Micropython
CC1101 RPi is an open-source printed circuit board by eydam-prototyping, from the eydam-prototyping/cc1101 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 85 × 56 mm with 150 parts on 114 nets, routed with 890 tracks and 146 vias.
It is built around the CC1101RGP, PCF8574T and M2.5. Its parts include 63 capacitors, 22 resistors, 22 inductors, 16 diodes and 8 transistors.

| CH1, 433 MHz | CH2, 433 MHz | CH3, 868 MHz | CH4, 868 MHz | Raspberry Pi | Meaning |
|---|---|---|---|---|---|
| VDD | VDD | - | - | 3.3V | Power Supply |
| GND | GND | - | - | GND | Ground |
| MOSI | MOSI | - | - | GPIO10 | SPI0 MOSI |
| MISO | MISO | - | - | GPIO9 | SPI0 MISO |
| SCK | SCK | - | - | GPIO11 | SPI0 SCLK |
| CSN | - | - | - | GPIO8 | SPI0 CE0 |
| GDO0 | - | - | - | GPIO5 | - |
| GDO2 | - | - | - | GPIO6 | - |
| - | CSN | - | - | GPIO7 | SPI0 CE1 |
| - | GDO0 | - | - | GPIO22 | - |
| - | GDO2 | - | - | GPIO23 | - |
| - | - | MOSI | MOSI | GPIO20 | SPI1 MOSI |
| - | - | MISO | MISO | GPIO19 | SPI1 MISO |
| - | - | SCK | SCK | GPIO21 | SPI1 SCLK |
| - | - | CSN | - | GPIO18 | SPI1 CE0 |
| - | - | GDO0 | - | GPIO24 | - |
| - | - | GDO2 | - | GPIO25 | - |
| - | - | - | CSN | GPIO17 | SPI1 CE1 |
| - | - | - | GDO0 | GPIO26 | - |
| - | - | - | GDO2 | GPIO27 | - |
Enable I2C and SPI in /boot/firmware/config.txt:
dtparam=i2c_arm=on
dtparam=spi=on
dtoverlay=spi1-2cs| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 100n | Capacitor_SMD:C_0402_1005Metric | C1001, C1002, C1003, C1004, C1005, C1006, C1051, C2001, C2002, C2003, C2004, C2005, C2006, C2051, C3001, C3002 +13 |
| 14 | 200 | Resistor_SMD:R_0603_1608Metric | R1001, R1002, R2001, R2002, R3001, R3002, R4001, R4002, R5003, R5004, R5005, R5006, R5007, R5008 |
| 11 | Y | LED_SMD:LED_0805_2012Metric | D1001, D1002, D2001, D2002, D3001, D3002, D4001, D4002, D5004, D5005, D5006 |
| 8 | 12n | Inductor_SMD:L_0402_1005Metric | L3121, L3123, L3124, L3131, L4121, L4123, L4124, L4131 |
| 8 | 27p | Capacitor_SMD:C_0402_1005Metric | C1081, C1101, C2081, C2101, C3081, C3101, C4081, C4101 |
| 8 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1001, Q1002, Q2001, Q2002, Q3001, Q3002, Q4001, Q4002 |
| 6 | 27n | Inductor_SMD:L_0402_1005Metric | L1121, L1123, L1131, L2121, L2123, L2131 |
| 4 | 18n | Inductor_SMD:L_0402_1005Metric | L3122, L3132, L4122, L4132 |
| 4 | 1p5 | Capacitor_SMD:C_0402_1005Metric | C3122, C3131, C4122, C4131 |
| 4 | 220p | Capacitor_SMD:C_0402_1005Metric | C1124, C1125, C2124, C2125 |
| 4 | 26MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1001, Y2001, Y3001, Y4001 |
| 4 | 3p9 | Capacitor_SMD:C_0402_1005Metric | C1121, C1131, C2121, C2131 |
| 4 | 56k | Resistor_SMD:R_0603_1608Metric | R1171, R2171, R3171, R4171 |
| 4 | CC1101 | Package_DFN_QFN:Texas_RGP0020D_VQFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias | U1001, U2001, U3001, U4001 |
| 4 | M2.5 | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H6001 |
| 3 | G | LED_SMD:LED_0805_2012Metric | D5001, D5002, D5003 |
| 2 | 100p | Capacitor_SMD:C_0402_1005Metric | C3124, C4124 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C3125, C4125 |
| 2 | 150 | Resistor_SMD:R_0603_1608Metric | R5001, R5002 |
| 2 | 1p | Capacitor_SMD:C_0402_1005Metric | C3121, C4121 |
| 2 | 22n | Inductor_SMD:L_0402_1005Metric | L1122, L2122 |
| 2 | 3n3 | Inductor_SMD:L_0402_1005Metric | L3125, L4125 |
| 2 | 3p3 | Capacitor_SMD:C_0402_1005Metric | C3123, C4123 |
| 2 | 47p | Capacitor_SMD:C_0402_1005Metric | C3126, C4126 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R5011, R5012 |
| 2 | 5p6 | Capacitor_SMD:C_0402_1005Metric | C1123, C2123 |
| 2 | 8p2 | Capacitor_SMD:C_0402_1005Metric | C1122, C2122 |
| 2 | R | LED_SMD:LED_0805_2012Metric | D5007, D5008 |
| 2 | SMA_433 | Connector_Coaxial:SMA_BAT_Wireless_BWSMA-KWE-Z001 | J1001, J2001 |
| 2 | SMA_868 | Connector_Coaxial:SMA_BAT_Wireless_BWSMA-KWE-Z001 | J3001, J4001 |
| 1 | PCF8574 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U5001 |
| 1 | Raspberry_Pi_4 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J6001 |
The 149 most common of 150 parts.

Rodemfr/MicronetToNMEA
A NMEA 0183 converter for Raymarine's wireless instruments ... and much more !


jp112sdl/HB-Dis-EP-42BW
4.2" ePaper Display mit 10 Tasterkanälen für Homematic

OnionDAO-git/oniondao-badge
An open-source, hacker-conference-style electronic badge built around the ESP32-S3-WROOM-1-N8R8 (8 MB flash + 8 MB Octal PSRAM), with swappable RF / audio / storage modules, an e-paper (or TFT) display socket, a secure…




bnahill/wireless_logger
A compact wireless inertial logging and processing hardware platform
It measures 85 × 56 mm and has 2 copper layers, 1.6 mm thick.
150 parts, built around the CC1101RGP, PCF8574T and M2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the eydam-prototyping/cc1101 repository on GitHub, at the commit this page was made from: the board is KiCad/CC1101_RPi/CC1101_RPi.kicad_pcb and its schematic KiCad/CC1101_RPi/CC1101_RPi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).