
COMM PANEL
Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.

Based on OpenHornet design - Modified for Personal Use.
CONTROLLER Throttle is an open-source printed circuit board by Exprezz0, from the Exprezz0/F-18C_Simulator repository on GitHub. It is a 2-layer board of 47 × 68 mm with 55 parts on 59 nets, routed with 281 tracks and 31 vias.
It is built around the IRFB3206PBF and IRLML6402TRPBF. Its parts include 18 resistors, 12 transistors, 12 connectors, 3 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Based on OpenHornet design (https://www.OpenHornet.com) - Modified for Personal Use.
The files located within this repository have been created from scratch or modified from existing OpenHornet files and were adapated to suit my personal needs based on available resources. There may or may not be easier or more efficient ways to produce some of the systems/designs here, but for the purpose of learning and gaining knowledge and experience designing, engineering, manufacturing, resourcing, etc., I've decided to take the more difficult path.
1: Any modification, usage, sharing, distribution, etc falls under the same licenses and legal definitions that apply to OpenHornet.
2: It is not 100% complete. I will add to it as I continue to progress my own pit.
3: Use at your own risk. The files within the repo may or may not be up to date with the current OH design. I've already cut, printed, and engraved most of the project and have modified various files to fit my own personal needs and resources.
4: I've done my best to keep it organized. If you see something out of place (meaning: incorrect directory, not missing. See #2), please PM me and I'll fix it.
5: Most importantly, while the files are 94.271% OpenHornet, there are modifications in there. Please do not reference any files taken from my repository in the OpenHornet Discord. It's not the developers, contributors, or testers responsibility to answer questions or fix issues associated with 3rd party files. I'll be more than happy to answer questions offline, and if it relates directly to OpenHornet, we can bring up the issue here.
This repository has been organized in the following manner:
The MCAD folder contains all .STL, .SVG, .DXF files types for all mechanical manufacturing. Within the MCAD folder are the 5 Major Assesmbly Groups:
* MCAD
* ASSY, UPPER INSTRUMENT PANEL
* ASSY, LOWER INSTRUMENT PANEL
* ASSY, CENTER TUB
* ASSY, LEFT CONSOLE
* ASSY, RIGHT CONSOLESub-assemblies for each major group will be broken down into their own individual folders. Files organic to that sub-assembly will be located in one of several child folders based on the material they are comprised of. (Resin, PETG, MDF, Acrylic).
Additionally, each major assembly will also have:
"ALL PANEL PLATES" folder; includes the Backlight Plate, Light Plate, and Legend Plate folders associated with that major assembly
"ALL KNOBS" folder; includes all knobs associated with that major assembly.
"RANDOM COTS PARTS" folder; includes any COTS that could be resin printed or manufactured without having to order or purchase. Examples include gears, bearings, spacers....
"OBSOLETE" folder; contains files that are outdated or no longer belong to the OH project.
* ASSY, RIGHT CONSOLE * ALL PANEL PLATES
* ALL KNOBS
* OBSOLETE
* RANDOM COTS PARTS
* OH5A2A2-1 - ASSY, WING FOLD HANDLE
* OH5A2A1-1 - ASSY, HOOK LEVER & INDICATOR
* OH5A1A1-1 - ASSY, RIGHT CONSOLE STRUCTURE
* ACRYLIC
* MDF
* PETG
Lastly, each material folder will be broken down into size for reference. If a part/object is suppose to be printed in PETG or ABS, and you can't find it, try looking in another material folder. Sometimes I prefered resin printing or using acrylic to the defaulted PETG.
The ECAD folder is set up similar to the MCAD directory (in this repository, and almost as identical to the official OpenHornet repository) and navigating it should be just as easy.
As of right now, all of the backlit panels have been transitioned to KiCad 6, the libraries associated with the files are consolidated and reorganized, and new manufacturing files that includes TOP and BOTTOM Bill of Materials (BOM) have been created to facilitate easier ordering from JLCPCB.com.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10K | OH_Footprints:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18 +2 |
| 6 | IRFB3206PBF | OH_Footprints:TO-220-3_Vertical | Q1, Q3, Q5, Q6, Q9, Q10 |
| 6 | IRLML6402TRPBF | OH_Footprints:SOT-23 | Q2, Q4, Q7, Q8, Q11, Q12 |
| 4 | MH | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 2 | 10uF | OH_Footprints:C_1206_3216Metric | C2, C3 |
| 1 | 47uF | OH_Footprints:C_1206_3216Metric | C1 |
| 1 | EXT +5V | OH_Footprints:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J8 |
| 1 | IDLE DETENT | OH_Footprints:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J9 |
| 1 | IN SERVO | OH_Footprints:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J11 |
| 1 | INB GRIP | OH_Footprints:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J4 |
| 1 | INB LIMIT | OH_Footprints:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J6 |
| 1 | MAX DETENT | OH_Footprints:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J10 |
| 1 | OUT SERVO | OH_Footprints:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J12 |
| 1 | OUTB GRIP | OH_Footprints:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J5 |
| 1 | OUTB LIMIT | OH_Footprints:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J7 |
| 1 | OpenHornetLogoSmall | KiCAD Libraries:OH_LOGO_37.7mm_5.9mm | LOGO1 |
| 1 | OpenHornetLogoSmall | KiCAD Libraries:CC-BY-NC-SA-Small | LOGO2 |
| 1 | OpenHornetLogoSmall | KiCAD Libraries:OH_LOGO_ONLY_11x6mm | LOGO3 |
| 1 | ProMicro | OH_Footprints:DIP-24_W15.24mm_Socket | U1 |
| 1 | RESET | OH_Footprints:SMD-SW-4_5.1x5.1 | SW1 |
| 1 | TCA9554PWR | OH_Footprints:TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | X/OUTB | OH_Footprints:JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | J1 |
| 1 | Y/INB | OH_Footprints:JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | J2 |
| 1 | Z/AUX | OH_Footprints:JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | J3 |

Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.


Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.

Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.

Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.

Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.

Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.

Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.

Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.


Exprezz0/F-18C_Simulator
Based on OpenHornet design - Modified for Personal Use.




OLIMEX/ESP32-POE-ISO
ESP32 Power Over Ethernet board with 3000VDC Galvanic insulation


r4hulrr/ausign
Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.

Estylos/Light-Doorbell-HW
KiCad project for a custom, battery-powered doorbell with dual-color LED feedback and 4-layer circular PCB design. Optimized for low power and compact integration

npeixoto64/ExitGuardian
A full product project that watches windows with wireless sensors and has a gateway for the main door with wireless sensors. When you open the exit door to leave, it checks:

zeugmaster/nucula-board
Nucula Board: an ESP32-C3 hardware prototype with USB-C, PN7160 NFC, OLED and detachable keyboard. KiCad sources and manufacturing files.
It measures 47 × 68 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the IRFB3206PBF and IRLML6402TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Exprezz0/F-18C_Simulator repository on GitHub, at the commit this page was made from: the board is ECAD/PCBs/Functional PCBs/CONTROLLER_Throttle/CONTROLLER_Throttle.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Exprezz0 before reusing the design.