
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

This is a breakout board for the popular inexpensive nRF51822 modules with dual 2x9 1.27 mm pin headers.
NRF Breakout is an open-source printed circuit board by ExploreEmbedded, from the ExploreEmbedded/BOB-11020_nRF51-E3-BO repository on GitHub. It is a 2-layer board of 26 × 55.5 mm with 16 parts on 55 nets, routed with 330 tracks and 4 vias.
It is built around the LM1117-3.3. Its parts include 8 connectors, 2 capacitors, 2 ICs, 1 resistor and 1 diode. It belongs with the interfaces and adapters boards and the nRF52 and nRF5x boards of this library.


This is a breakout board for the popular inexpensive nRF51822 modules with dual 2x9 1.27 mm pin headers.
This product is jointly developed by Explore Embedded and electronut.in.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CONN_01X01 | Connect:1pin | P7, P8 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P4, P6 |
| 2 | CONN_01X08 | Pin_Headers:Pin_Header_Straight_1x08 | P2, P5 |
| 2 | CONN_01X18 | Pin_Headers:Pin_Header_Straight_1x18 | P1, P3 |
| 1 | logo:LOGO (2) | LOGO | |
| 1 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C2 |
| 1 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | 470r | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | LED | ee:LED-0603_NEW | D1 |
| 1 | LM1117 | ee:LM_1117 | IC1 |
| 1 | LOGO | ee:LOGO_electronut | U$2 |
| 1 | nRF51822 | ee:nRF81522Final | U1 |

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix


doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

plinkysynth/plinky_public
a public release of the plinky sw and hw

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32


It measures 26 × 55.5 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ExploreEmbedded/BOB-11020_nRF51-E3-BO repository on GitHub, at the commit this page was made from: the board is Design/nRF_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ExploreEmbedded before reusing the design.