

Goob
- Size
- 65 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 55
- Pads
- 193
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Jun 2026
- Updated
- 4 Jul 2026
Overview
Goob is an open-source printed circuit board by Ethan2502, from the Ethan2502/Goob repository on GitHub. It is a 2-layer board of 65 × 65 mm with 36 parts on 55 nets.
It is built around the ESP32-S3-WROOM-1-N8. Its parts include 13 capacitors, 10 connectors, 9 resistors, 3 ICs and 1 fuse. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdGoob
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1µF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C7, C12 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R4, R5 |
| 2 | 10µF | Capacitor_SMD:C_0805_2012Metric | C6, C9 |
| 2 | 22µF | Capacitor_SMD:C_0805_2012Metric | C10, C11 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 1 | 0.01µF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 0Ω | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 100µF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 1µF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 2.2µF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2A hold / ~4A | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | 3.3V Reg | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | 470µF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C5 |
| 1 | 5VIN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J8 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | Motor Driver | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U2 |
| 1 | MotorA | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | MotorB | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | SERVO_GATE | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | SERVO_PAN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | SERVO_TILT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | ToF Sensor | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J9 |
| 1 | Xiao Connector | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J11 |
More from Ethan2502/Goob
3Similar boards
- 2 layers85 × 115 mm

OSO BOOK B1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
76 parts8.1kCC-BY-SA-4.0 - 2 layers299 × 82.5 mm

PixelWave
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
663 parts915 - 4 layers56.5 × 99.8 mm

BitaxeGamma
bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro
147 parts432CERN-OHL-S-2.0 - 2 layers129.5 × 50.8 mm

- 4 layers84.5 × 129.5 mm

- 2 layers110 × 115 mm

Esp32 keyboard v0.1
hhuysqt/esp32s3-keyboard
USB/BLE keyboard driver based on ESP32S3-WROOM-1
230 parts168GPL-3.0 - 2 layers35.1 × 36.6 mm

BinNanoFOC
katbinaris/nanofoc_devkit
Compact All-In-One BLDC Controler featuiring ESP32-S3, TMC6300 and Magalpha sensors. Small 35x35mm footprint.
76 parts146 - 2 layers148 × 81 mm

Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge
58 parts107MIT
Questions
How big is the Goob PCB?
It measures 65 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Goob use?
36 parts, built around the ESP32-S3-WROOM-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Goob KiCad files?
From the Ethan2502/Goob repository on GitHub, at the commit this page was made from: the board is Main/Goob.kicad_pcb and its schematic Battery/Battery.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Goob design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ethan2502 before reusing the design.

