eshelton328/forgeHardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.
Esp32s3-devkit is an open-source printed circuit board by eshelton328, from the eshelton328/forge repository on GitHub. It is a 4-layer board of 59.3 × 38 mm with 37 parts on 59 nets, routed with 378 tracks and 132 vias.
It is built around the ESP32-S3-WROOM-1-N16, TPS63070RNMR and USBLC6-2SC6, with the AO3401A and MK-12C03-G015 among its other parts. Its parts include 12 capacitors, 11 resistors, 3 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 and NXP (LPC, Kinetis, i.MX RT) boards of this library.
24 × 10 mm front board with Omron B3U-1000P battery-check switch and Wuerth 150141M173100 common-anode RGB LED. Two copper layers, 1.6 mm thickness. J1 faces inward on B.Cu. These are actual routed boards fitted to the v4.2 enclosure, with physical tolerance/assembly verification still pending.
Connector side · Schematic PDF · Native schematic · Native PCB · BOM
See the harness contract and test report. Pullups, debounce capacitors, 100 Ω button series resistors and RGB resistors live on the main board. Do not connect this board directly to an unprotected ESP32 input in place of the defined main-board interface.
Auto-generated on merge to main.
| Top | Bottom |
|---|---|
 |  |
Download populated 3D model (GLB) — open in Blender or a glTF viewer.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22µF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C8, C9 |
| 3 | 0.1µF | Capacitor_SMD:C_0402_1005Metric | C4, C10, C12 |
| 3 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R2, R7, R8 |
| 2 | 100kΩ | Resistor_SMD:R_0402_1005Metric | R5, R11 |
| 2 | 10µF | Capacitor_SMD:C_0402_1005Metric | C3, C5 |
| 2 | 10µF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 1kΩ | Resistor_SMD:R_0402_1005Metric | R1, R6 |
| 2 | 5.1kΩ | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | Conn_01x17_Pin | Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_Vertical | J1, J2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D3 |
| 1 | 1.5µH | TPS63070:IND_XFL4020-152MEC | L1 |
| 1 | 150kΩ | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1µF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 3.6v | Diode_SMD:D_SOD-323 | D2 |
| 1 | 470kΩ | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW3 |
| 1 | ESP32-S3-WROOM-1-N16 | RF_Module:ESP32-S3-WROOM-1 | U2 |
| 1 | MK-12C03-G015 | Button_Switch_SMD:SW_SPDT_Shouhan_MSK12C02 | SW1 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | TPS63070RNMR | TPS63070:TPS63070 | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.
eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.
eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.
eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.
eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.
aliaksei-lameyka/ENKU-Base-reader
Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.
bamnet/village
I have a collection of 1-2 dozen Department 56 lighted Christmas houses. The default lighting solution has a big problem though: a house is either lit or not.
It measures 59.3 × 38 mm and has 4 copper layers, 1.6 mm thick.
37 parts, built around the ESP32-S3-WROOM-1-N16, TPS63070RNMR, USBLC6-2SC6 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the eshelton328/forge repository on GitHub, at the commit this page was made from: the board is boards/esp32s3-devkit/esp32s3-devkit.kicad_pcb and its schematic boards/alec-controls/alec-controls.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask eshelton328 before reusing the design.
