
Esp32s3-devkit-5v
eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.

Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.
Alec sensor is an open-source printed circuit board by eshelton328, from the eshelton328/forge repository on GitHub. It is a 4-layer board of 64 × 56 mm with 100 parts on 80 nets, routed with 2,905 tracks and 187 vias.
It is built around the ESP32-S3-WROOM-1-N16, TPS63070RNMR and RV-3028-C7-32.768KHZ-1PPM-TA-QC, with the USBLC6-2SC6, RC0402FR-0710KL and RC0402FR-07100KL among its other parts. Its parts include 39 resistors, 27 capacitors, 6 ICs, 5 transistors and 4 switches. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
24 × 10 mm front board with Omron B3U-1000P battery-check switch and Wuerth 150141M173100 common-anode RGB LED. Two copper layers, 1.6 mm thickness. J1 faces inward on B.Cu. These are actual routed boards fitted to the v4.2 enclosure, with physical tolerance/assembly verification still pending.

Connector side · Schematic PDF · Native schematic · Native PCB · BOM
See the harness contract and test report. Pullups, debounce capacitors, 100 Ω button series resistors and RGB resistors live on the main board. Do not connect this board directly to an unprotected ESP32 input in place of the defined main-board interface.
Auto-generated on merge to main.
| Top | Bottom |
|---|---|
![]() | ![]() |
Download populated 3D model (GLB) — open in Blender or a glTF viewer.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R3, R7, R12, R13, R18, R27, R31, R33 |
| 6 | 0.1µF | Capacitor_SMD:C_0402_1005Metric | C4, C12, C18, C20, C25, C29 |
| 6 | 100k | Resistor_SMD:R_0402_1005Metric | R40, R45, R47, R54, R55, R56 |
| 6 | 22µF | Capacitor_SMD:C_1206_3216Metric | C6, C7, C8, C14, C15, C16 |
| 5 | 100kΩ | Resistor_SMD:R_0402_1005Metric | R1, R6, R10, R19, R32 |
| 4 | 10µF | Capacitor_SMD:C_0603_1608Metric | C3, C5, C11, C13 |
| 4 | 10µF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C9, C10 |
| 4 | M3 | MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R43, R46, R49 |
| 3 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q4, Q5, Q7 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C36, C37 |
| 2 | 1.5µH | TPS63070:IND_XFL4020-152MEC | L1, L2 |
| 2 | 150Ω | Resistor_SMD:R_0402_1005Metric | R29, R30 |
| 2 | 22Ω | Resistor_SMD:R_0402_1005Metric | R34, R35 |
| 2 | 4.7kΩ | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | 47k | Resistor_SMD:R_0402_1005Metric | R42, R44 |
| 2 | 5.1kΩ | Resistor_SMD:R_0402_1005Metric | R14, R15 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1, Q6 |
| 2 | TPS63070RNMR | TPS63070:TPS63070 | U1, U2 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 1.5A FAST | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | 100µF | Capacitor_SMD:C_1206_3216Metric | C21 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | 1101M2S3CQE2 | Sensor:SW_CK_1101M2S3CQE2 | SW1 |
| 1 | 130kΩ | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 150141M173100 | LED_SMD:LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 | D2 |
| 1 | 150kΩ | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | 1µF | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 22µF | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 330Ω | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 33k | Resistor_SMD:R_0402_1005Metric | R48 |
| 1 | 3v3 | TestPoint_Pad_D1.0mm | TP3 |
| 1 | 470kΩ | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 5v | TestPoint_Pad_D1.0mm | TP4 |
| 1 | 680kΩ | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | BATTERY / PAIR | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW7 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW3 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J1 |
| 1 | EN_3V3 | TestPoint_Pad_D1.0mm | TP7 |
| 1 | ESP32-S3-WROOM-1-N16 | Board:ESP32-S3-WROOM-1_Overhang | U3 |
| 1 | GND | TestPoint_Pad_D1.0mm | TP1 |
| 1 | GPIO13 | TestPoint_Pad_D1.0mm | TP6 |
| 1 | GPIO15 | TestPoint_Pad_D1.0mm | TP5 |
| 1 | LD2410C — INTERNAL | Sensor:Samtec_SSW-105-01-F-S | J3 |
| 1 | PFET | TestPoint_Pad_D1.0mm | TP2 |
| 1 | RADAR_EN | TestPoint_Pad_D1.0mm | TP8 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | RV-3028-C7 | Package_SON:MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mm | U5 |
| 1 | TMUX1511PWR | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U10 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Board:USB_C_HRO_Overhang | J2 |

eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.

eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.

eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.

eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.

eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.

oats-center/avena-rs
Avena On The Road: Bringing pavement health data to your fingertips




AndreiVladescu/LibrePLC32
The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.

tag-designs/hardware
Hardware designs for tags and bases

LeeSpo/portable-display-epass-EVT1-minboot-r1
当前自研硬件为 38 × 64 mm、四层 split-power 工程候选,尚未放行生产。

marceldale/nest-mini-v2-voice
Open voice satellite board for the Google Nest Mini (2nd gen): local Home Assistant voice assistant with ESP32-S3 + XMOS XU316, ESPHome, Voice PE compatible. Open hardware, prototype stage.
It measures 64 × 56 mm and has 4 copper layers, 1.6 mm thick.
100 parts, built around the ESP32-S3-WROOM-1-N16, TPS63070RNMR, RV-3028-C7-32.768KHZ-1PPM-TA-QC and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the eshelton328/forge repository on GitHub, at the commit this page was made from: the board is boards/alec-sensor/alec-sensor.kicad_pcb and its schematic boards/alec-controls/alec-controls.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask eshelton328 before reusing the design.