6 layers172 × 100 mm
6 layers38 × 41.3 mm
Testrack module stm32f7v
esden/redcuttle9Moved to Codeberg
- Size
- 38 × 41.3 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 33
- Pads
- 219
- Tracks, vias
- 200, 67
- Pours
- 24
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Jul 2022
- Updated
- 19 Jan 2025
Overview
Testrack module stm32f7v is an open-source printed circuit board by esden, from the esden/redcuttle repository on GitHub. It is a 6-layer board of 38 × 41.3 mm with 23 parts on 33 nets, routed with 200 tracks and 67 vias.
It is built around the STM32F730V8T6 and RT9193-33GB. Its parts include 16 capacitors, 3 ICs, 2 crystals and 1 connector. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
Main components
2
STM32F730V8T6
LQFP-100(14x14)-40℃~+85℃ 1.7V~3.6V 12bit 12bit 216MHz 256KB 32 Bit 64KB 82 ARM Cortex-M7 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
RT9193-33GB
SOT-23-5-40℃~+125℃@(Tj) -50dB@(10kHz) 1 100uVrms 220mV@(300mA) 3.3V 300mA 5.5V 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRICHTEKVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdWelcome to RedCuttle.
This project is the hardware and software for a JTAG/SWD/UART port multiplexer and switcher.
This hardware allows the control of multiple debuggers and targets to be connected to one another for development and testing purposes. The original motivation for this is the Hardware In The Loop testing of the Black Magic Debug firmware on Black Magic Probe hardware.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | misc.IntLib:0402 | C4, C5, C6, C10, C11, C12 |
| 2 | 100nF | misc.IntLib:0402 | C1, C15 |
| 2 | 10p | misc.IntLib:0402 | C8, C9 |
| 2 | 2.2u | misc.IntLib:0402 | C2, C3 |
| 2 | 22p | misc.IntLib:0402 | C16, C17 |
| 2 | 22uF | misc.IntLib:0805 | C13, C14 |
| 1 | |||
| 1 | 12MHz | misc.IntLib:XTAL-2520-4SMD | Y1 |
| 1 | 24Cxx | misc.IntLib:SO8 | U1 |
| 1 | 32.768kHz | misc.IntLib:XTAL-3215 | Y2 |
| 1 | M.2_B | misc.IntLib:M.2_B_EDGE | P1 |
| 1 | RT9193-33 | misc.IntLib:SOT23-5 | U3 |
| 1 | STM32F730V | misc.IntLib:QFP100 | U2 |
Questions
How big is the Testrack module stm32f7v PCB?
It measures 38 × 41.3 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Testrack module stm32f7v use?
23 parts, built around the STM32F730V8T6 and RT9193-33GB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Testrack module stm32f7v KiCad files?
From the esden/redcuttle repository on GitHub, at the commit this page was made from: the board is altium_import/testrack_module_stm32f7v/testrack_module_stm32f7v.kicad_pcb and its schematic altium_import/testrack_backplane_passive_5u/slot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Testrack module stm32f7v design in my own project?
Its repository states no licence, so its author keeps all rights: ask esden before reusing the design.
More from esden/redcuttle
6- 6 layers172 × 100 mm
- 4 layers141.5 × 128.5 mm
- 4 layers141.5 × 128.6 mm
- 4 layers40 × 78 mm
- 2 layers38 × 41.3 mm
Similar boards
- 2 layers30.4 × 12.7 mm
- 2 layers82.1 × 22.5 mm
Star pointer
dilshan/star-pointer
DIY virtual electronic finderscope for astronomical telescopes
39 parts24MIT - 2 layers65 × 100 mm
- 2 layers80 × 60 mm
UAV project
havrak/UAV-project
Building a UAV as part of my final year on high school, now my hobby project
80 parts5MIT - 4 layers80 × 80 mm
- 2 layers97.4 × 36.8 mm
- 4 layers83.1 × 31.9 mm
- 6 layers72 × 44 mm
