

DSDrum
- Size
- 80 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 33
- Pads
- 138
- Tracks, vias
- 320, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Feb 2026
- Updated
- 8 Feb 2026
Overview
DSDrum is an open-source printed circuit board by ernesto-g, from the ernesto-g/DsDrum_pcb repository on GitHub. It is a 2-layer board of 80 × 55 mm with 47 parts on 33 nets, routed with 320 tracks and 8 vias.
It is built around the ATTINY85-20PU and MMBTA06. Its parts include 18 resistors, 9 switches, 5 capacitors, 4 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY85-20PU
PDIP-8-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH PDIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MMBTA06
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 250mV 300mW 400 4V 500mA 80V NPN SOT-23 Bipolar (BJT) ROHSALJBipolar (BJT)
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18 |
| 8 | SW_Push | Switch:My_SW_PUSH_6mm | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 5 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R7 |
| 3 | AudioJack3_SwitchTR | Jack_5p:Tayda_3.5mm_stereo_TRS_jack_A-853 | J2, J3, J4 |
| 2 | 100nF | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C1, C3 |
| 2 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6 |
| 2 | 47uFx16v | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2, C4 |
| 1 | 10nF | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C5 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 50kB | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV1 |
| 1 | ATtiny85-20PU | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U2 |
| 1 | Conn_01x02_Female | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | LED | LED_THT:LED_D3.0mm | D3 |
| 1 | LOGO | serigrafia_frente_dsdrum:bateria | G*** |
| 1 | LOGO | serigrafia_frente_dsdrum:nombre | G*** |
| 1 | LOGO | serigrafia_frente_dsdrum:marca_polaridad | G*** |
| 1 | LOGO | serigrafia_frente_dsdrum:logo | G*** |
| 1 | LOGO | serigrafia_frente_dsdrum:iconos | G*** |
| 1 | MMBTA06 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SW_SPDT | Switch:SPDT_SW | SW1 |
Similar boards
- 2 layers100 × 64.9 mm

- 2 layers108.2 × 124.9 mm

- 2 layers230.2 × 160.8 mm

- 2 layers272.1 × 171.5 mm

- 2 layers178.4 × 49.5 mm

- 2 layers168 × 61 mm

Smart home automation controller
dhanush-darpan/Smart-Home-Automation-Controller-PCB
This repository contains the KiCad project files, PCB layout, schematic, and a printable PDF of the board for the Smart Home Automation Controller.
72 parts - 2 layers50 × 80 mm

Timer
Dhruv6576/CYTM-Digital-Timer
24 VDC cyclic relay timer: MG51 firmware + KiCad PCB generated from scratch
45 parts - 2 layers42 × 48.7 mm

Questions
How big is the DSDrum PCB?
It measures 80 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DSDrum use?
47 parts, built around the ATTINY85-20PU and MMBTA06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DSDrum KiCad files?
From the ernesto-g/DsDrum_pcb repository on GitHub, at the commit this page was made from: the board is DSDrum/DSDrum.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DSDrum design in my own project?
Its repository states no licence, so its author keeps all rights: ask ernesto-g before reusing the design.