2 layers21.7 × 43.7 mm
2 layers42 × 48.7 mm
SCS Interface
JavaPowerFR/SCSSCS Interface
- Size
- 42 × 48.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 22
- Pads
- 95
- Tracks, vias
- 119, 35
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 May 2024
- Updated
- 3 Jun 2024
Overview
SCS Interface is an open-source printed circuit board by JavaPowerFR, from the JavaPowerFR/SCS repository on GitHub, published under the MIT licence. It is a 2-layer board of 42 × 48.7 mm with 38 parts on 22 nets, routed with 119 tracks and 35 vias.
It is built around the ABS2, FDLL4148 and MMBTA06, with the P4SMA39CA and SS34ALH among its other parts. Its parts include 11 capacitors, 10 resistors, 5 diodes, 4 inductors and 3 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
5
ABS2
ABSBridge RectifiersJiangsu Changjing Electronics Technology (CJ)
FDLL4148
SOD-80-55℃~+175℃ 1 Independent 100V 1A 1V@10mA 200mA 4ns 500mW 5uA@75V SOD-80 Switching Diodes ROHSonsemiSwitching Diodes
MMBTA06
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 250mV 300mW 400 4V 500mA 80V NPN SOT-23 Bipolar (BJT) ROHSALJBipolar (BJT)
P4SMA39CA
DO-214AC-55℃~+150℃ 1uA 33.3V 390pF 400W@10/1000us 41V 53.9V 7.6A Bidirectional TVS DO-214AC ESD and Surge Protection (TVS/ESD) ROHSYFWUncategorisedSS34ALH
-Schottky DiodesTaiwan Semiconductor
README
README.mdSCS
SCS Interface For MyHOME Products Legrand BTicino
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R5, R9, R10 |
| 3 | 22µ | Capacitor_SMD:C_0805_2012Metric | C9, C10, C11 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C4, C8 |
| 2 | 10µ | Inductor_SMD:L_Sunlord_SWPA6028S | L3, L4 |
| 2 | 30p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 4.3µ | Inductor_SMD:L_Wuerth_MAPI-3020 | L1, L2 |
| 1 | 100 1/4W | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 13.7k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 13p (OPT) | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 1A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 2.2µ | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 220µ 35V | Capacitor_SMD:CP_Elec_8x10 | C3 |
| 1 | 56k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | ABS2 | Diode_SMD:Diode_Bridge_Diotec_ABS | D2 |
| 1 | AZ1117CH2 - 3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | FDLL4148 | Diode_SMD:D_MiniMELF | D3 |
| 1 | Headder | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | LM397 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | LMR51420 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | M2 | Diode_SMD:D_SMA | D4 |
| 1 | MMBTA06 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | P4SMA39CA | Diode_SMD:D_SMA | D1 |
| 1 | SCS | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal_PNP | J1 |
| 1 | SS34ALH | Diode_SMD:D_SMA | D6 |
| 1 | VCC_IO | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
More from JavaPowerFR/SCS
1Similar boards
- 2 layers61.6 × 53.7 mm
Osborne floppy emulator
khaddra/osborne-floppy-emulator
Floppy disk drive emulator for the Osborne 1. Unfinished.
82 parts2 - 2 layers56 × 50 mm
Catvfoctrl
xflyingcat/vfo_controller
External VFO controller with magnetic encoder for the Xiegu G90 HF transceiver
55 parts1MIT - 2 layers271.8 × 172.7 mm
Peripherl bridge panel
Pongkemon01/Zeabus-Elec-Circuit-Peripheral_bridge
Bridge circuit for several peripheral
1,176 parts - 2 layers60 × 34 mm
- 4 layers73.4 × 76.2 mm
Kommunikationsmodul Ethernet
KhanKudo/diplomprojekt
HTL tgm Diplomprojekt RTLS (IOO), Gruppe Foldlabs, Jahrgang 2023/24
126 parts - 2 layers59.4 × 70.6 mm
Carte Mere Raspberry
mchalain/motordriver_board
Kicad project to manage 3 steppers with a Raspi Pico
25 parts - 4 layers63.4 × 63.5 mm
Detector de resonancia magnetoelástica V1
oierC/Detector_de_Resonancia_Magnetoelastica
Firmware y software empleado por la plataforma compacta de Detección de Resonancia Magnetoelástica (DRM).
85 partsMIT - 2 layers83.9 × 114.9 mm
Hot plate controller
rohamid/Hot-plate-controller-master
STM32 based hot plate PCB soldering controller
81 parts
Questions
How big is the SCS Interface PCB?
It measures 42 × 48.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SCS Interface use?
38 parts, built around the ABS2, FDLL4148, MMBTA06 and P4SMA39CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SCS Interface KiCad files?
From the JavaPowerFR/SCS repository on GitHub, at the commit this page was made from: the board is Hardware/SCS Interface V1/KiCad/SCS_Interface.kicad_pcb and its schematic Hardware/SCS Interface V1/KiCad/SCS_Interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SCS Interface design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).