Skip to the content
PCBKitNew board
ABS2 on a board, in 3D

ABS2

Jiangsu Changjing Electronics Technology (CJ)

Extended
DatasheetJLCPCBLCSCcj/ABS2
Category
Bridge Rectifiers
Package
ABS
Pins
4

Overview

The ABS2 is a bridge Rectifier made by Jiangsu Changjing Electronics Technology (CJ) in a ABS package with 4 pins.

PCBKit's library has its KiCad symbol (Diode_Bridge:ABS2, from KiCad's library) and its footprint (Diode_SMD:Diode_Bridge_Diotec_ABS, from KiCad's library), ready for a KiCad board. 2 are in stock at JLCPCB (part C5292811). 11 open-source boards in 9 repositories on GitHub use it.

Symbol

+1-234
Diode_Bridge:ABS2From KiCad's library

Footprint

1234
Diode_SMD:Diode_Bridge_Diotec_ABSFrom KiCad's library

Parameters

7
Current - Rectified
1A
Non-Repetitive Peak Forward Surge Current
70A
Operating Junction Temperature Range
-55℃~+150℃
Reverse Leakage Current (Ir)
10uA@200V
Type
Single-Phase Rectifier
Voltage - DC Reverse(Vr)
200V
Voltage - Forward(Vf@If)
980mV@1A

Order codes

1

Pinout

4
The pins of the ABS2
PinNameType
1+Passive
2-Passive
3—Passive
4—Passive

Open-source boards using it

All 11
  • 2 layers42 × 48.7 mmSCS Interface, the printed circuit board in 3D

    SCS Interface

    JavaPowerFR/SCS

    SCS Interface

    38 partsMIT
  • 4 layers73.4 × 76.2 mmKommunikationsmodul Ethernet, the printed circuit board in 3D

    Kommunikationsmodul Ethernet

    KhanKudo/diplomprojekt

    HTL tgm Diplomprojekt RTLS (IOO), Gruppe Foldlabs, Jahrgang 2023/24

    126 parts
  • 2 layers59.4 × 70.6 mmCarte Mere Raspberry, the printed circuit board in 3D

    Carte Mere Raspberry

    mchalain/motordriver_board

    Kicad project to manage 3 steppers with a Raspi Pico

    25 parts
  • 4 layers63.4 × 63.5 mmDetector de resonancia magnetoelástica V1, the printed circuit board in 3D

    Detector de resonancia magnetoelástica V1

    oierC/Detector_de_Resonancia_Magnetoelastica

    Firmware y software empleado por la plataforma compacta de Detección de Resonancia Magnetoelástica (DRM).

    85 partsMIT
  • 2 layers83.9 × 114.9 mmHot plate controller, the printed circuit board in 3D

    Hot plate controller

    rohamid/Hot-plate-controller-master

    STM32 based hot plate PCB soldering controller

    81 parts
  • 2 layers52.5 × 95 mmThermostat, the printed circuit board in 3D

    Thermostat

    kelvie/kicads

    Random kicad experiments

    39 parts4Apache-2.0
  • 2 layers105.5 × 63.5 mmOS S88n, the printed circuit board in 3D

    OS S88n

    bask185/Train-Science-DIY

    108 parts3

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/cj/ABS2" title="ABS2 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/cj/ABS2.jpg" alt="ABS2" width="1200" height="900">
A picture that opens the part, for a README
[![ABS2](https://pcbkit.io/embed/parts/cj/ABS2.jpg?size=s)](https://pcbkit.io/parts/cj/ABS2)

Questions

Is there a KiCad symbol and footprint for the ABS2?

Yes. The symbol is Diode_Bridge:ABS2 and the footprint Diode_SMD:Diode_Bridge_Diotec_ABS, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ABS2?

ABS, with 4 pins. Its footprint is drawn on this page.

Where is the ABS2 datasheet?

Jiangsu Changjing Electronics Technology (CJ) publishes it: the Datasheet link on this page opens it.

Where can I order the ABS2?

JLCPCB lists it as part C5292811, with 2 in stock; the sellers' links on this page open their listings.

What can replace the ABS2?

Parts like it in the library: the ABS10 by MDD, the ABS10 by GOODWORK, the ABS10 by baocheng and the ABS10 by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ABS2?

11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8