Skip to the content
2 layers21.7 × 43.7 mmSCS Interface Lte, the printed circuit board in 3D

SCS Interface Lte

JavaPowerFR/SCS

SCS Interface

Size
21.7 × 43.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
15
Pads
56
Tracks, vias
88, 8
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
12 May 2024
Updated
3 Jun 2024

Overview

SCS Interface Lte is an open-source printed circuit board by JavaPowerFR, from the JavaPowerFR/SCS repository on GitHub, published under the MIT licence. It is a 2-layer board of 21.7 × 43.7 mm with 24 parts on 15 nets, routed with 88 tracks and 8 vias.

It is built around the ABS2, FDLL4148 and MMBTA06, with the P4SMA39CA among its other parts. Its parts include 8 resistors, 6 capacitors, 3 diodes, 2 connectors and 2 inductors. It belongs with the interfaces and adapters boards of this library.

Main components

4

README

README.md

SCS

SCS Interface For MyHOME Products Legrand BTicino

Parts

24
QtyValueFootprintReferences
410kResistor_SMD:R_0805_2012MetricR4, R5, R6, R8
230pCapacitor_SMD:C_0805_2012MetricC1, C2
24.3µInductor_SMD:L_Wuerth_MAPI-3020L1, L2
1100 1/4WResistor_SMD:R_1206_3216MetricR1
1100nCapacitor_SMD:C_0805_2012MetricC4
113p (OPT)Capacitor_SMD:C_0805_2012MetricC3
11AFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1
11kResistor_SMD:R_0805_2012MetricR2
11nCapacitor_SMD:C_0805_2012MetricC6
120kResistor_SMD:R_0805_2012MetricR7
122µCapacitor_SMD:C_0805_2012MetricC9
156kResistor_SMD:R_0805_2012MetricR3
1ABS2Diode_SMD:Diode_Bridge_Diotec_ABSD4
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1FDLL4148Diode_SMD:D_MiniMELFD5
1LM397Package_TO_SOT_SMD:SOT-23-5U1
1MMBTA06Package_TO_SOT_SMD:SOT-23Q1
1P4SMA39CADiode_SMD:D_SMAD1
1SCSTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal_PNPJ1

More from JavaPowerFR/SCS

1
  • 2 layers42 × 48.7 mmSCS Interface, the printed circuit board in 3D

    SCS Interface

    JavaPowerFR/SCS

    SCS Interface

    38 partsMIT

Similar boards

  • 2 layers61.6 × 53.7 mmOsborne floppy emulator, the printed circuit board in 3D

    Osborne floppy emulator

    khaddra/osborne-floppy-emulator

    Floppy disk drive emulator for the Osborne 1. Unfinished.

    82 parts2
  • 2 layers56 × 50 mmCatvfoctrl, the printed circuit board in 3D

    Catvfoctrl

    xflyingcat/vfo_controller

    External VFO controller with magnetic encoder for the Xiegu G90 HF transceiver

    55 parts1MIT
  • 2 layers271.8 × 172.7 mmPeripherl bridge panel, the printed circuit board in 3D

    Peripherl bridge panel

    Pongkemon01/Zeabus-Elec-Circuit-Peripheral_bridge

    Bridge circuit for several peripheral

    1,176 parts
  • 2 layers60 × 34 mmMiniNDP, the printed circuit board in 3D

    MiniNDP

    bkw777/NODE_DATAPAC

    Reproduction & documentation of Node Systems DATAPAC

    21 parts7
  • 4 layers73.4 × 76.2 mmKommunikationsmodul Ethernet, the printed circuit board in 3D

    Kommunikationsmodul Ethernet

    KhanKudo/diplomprojekt

    HTL tgm Diplomprojekt RTLS (IOO), Gruppe Foldlabs, Jahrgang 2023/24

    126 parts
  • 2 layers59.4 × 70.6 mmCarte Mere Raspberry, the printed circuit board in 3D

    Carte Mere Raspberry

    mchalain/motordriver_board

    Kicad project to manage 3 steppers with a Raspi Pico

    25 parts
  • 4 layers63.4 × 63.5 mmDetector de resonancia magnetoelástica V1, the printed circuit board in 3D

    Detector de resonancia magnetoelástica V1

    oierC/Detector_de_Resonancia_Magnetoelastica

    Firmware y software empleado por la plataforma compacta de Detección de Resonancia Magnetoelástica (DRM).

    85 partsMIT
  • 2 layers83.9 × 114.9 mmHot plate controller, the printed circuit board in 3D

    Hot plate controller

    rohamid/Hot-plate-controller-master

    STM32 based hot plate PCB soldering controller

    81 parts

Questions

How big is the SCS Interface Lte PCB?

It measures 21.7 × 43.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SCS Interface Lte use?

24 parts, built around the ABS2, FDLL4148, MMBTA06 and P4SMA39CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SCS Interface Lte KiCad files?

From the JavaPowerFR/SCS repository on GitHub, at the commit this page was made from: the board is Hardware/SCS Interface V1/KiCad/SCS_Interface_Lte.kicad_pcb and its schematic Hardware/SCS Interface V1/KiCad/SCS_Interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SCS Interface Lte design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).