Skip to the content
2 layersKitSamD21 vE, the printed circuit board in 3D

Custom little board with the samd21 microcontroller.

Copper layers
2
Thickness
1.6 mm
Parts
27
Nets
56
Pads
156
Tracks, vias
373, 28
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
25 Oct 2026
Updated
25 Oct 2026

Overview

KitSamD21 vE is an open-source printed circuit board by ernestalfo, from the ernestalfo/KitSAMD21 repository on GitHub. It is a 2-layer board with 27 parts on 56 nets, routed with 373 tracks and 28 vias.

It is built around the ATSAMD21G18A-AU, 1N4148WS and PRTR5V0U2X. Its parts include 13 capacitors, 4 connectors, 3 resistors, 3 diodes and 2 ICs. It belongs with the SAM D and SAM boards of this library.

Main components

3

README

README.md

Custom little board with the SAMD21 microcontroller with all the pins exposed. [KiCAD project]

image

Parts

27
QtyValueFootprintReferences
5100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC3, C4, C5, C6, C10
310uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C12
21N4148WSDiode_SMD:D_SOD-323_HandSolderingD1, D3
222pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8, C9
2Conn_01x20_SocketConnector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ3, J4
110kOResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
11MOResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3
11uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC7
122uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC13
132.768kHzCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
1330Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2
14.5nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11
1ATSAMD21G18A-APackage_QFP:TQFP-48_7x7mm_P0.5mmU1
1Conn_ARM_JTAG_SWD_10Connector:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_VerticalJ2
1LM2936-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1PRTR5V0U2XPackage_TO_SOT_SMD:SOT-143D2
1SW_PushButton_Switch_SMD:SW_SPST_B3U-1000PSW1
1USB_B_MicroConnector:USB3131-30-0230-AJ1

Similar boards

  • 4 layers300 × 308 mmPANEL CARDS, the printed circuit board in 3D

    PANEL CARDS

    k16shikano/r2r-dac

    16ビットR-2RラダーによるDAコンバーターの設計

    505 parts
  • 4 layers45 × 35 mmSTSPIN32G4 V2, the printed circuit board in 3D

    STSPIN32G4 V2

    Scouttman/STSPIN32G4

    STM32G4 small board

    109 parts6
  • 4 layers34 × 63 mmSTSPIN32G4 V2, the printed circuit board in 3D

    STSPIN32G4 V2

    Scouttman/ZombieServo

    Motor Driver for some aliexpress robotic serovos powered by simpleFOC and a STSPIN32g4

    91 parts6
  • 2 layers140 × 76.9 mmJoyMIDI, the printed circuit board in 3D

    JoyMIDI

    bcc6/joyMIDI-HW

    222 parts2
  • 4 layers45 × 60 mmHPM5361-RMCS Slave V1.0, the printed circuit board in 3D

    HPM5361-RMCS Slave V1.0

    Kaiser041224/HPM5361-RMCS_Slave-Pro

    HPM5361-RMCSSlave-V1.0 是一个基于 KiCad 9 的硬件工程,核心主控为 HPM5361ICB1。从顶层框图、层级原理图和关键器件选型来看,这块板更像一块面向机器人/运动控制场景的从控板,用于通信汇聚、PWM 外设输出、姿态感知、板载存储和基础人机交互。

    222 parts2
  • 4 layers40.5 × 40.5 mmHPM5361-RMCS Slave Lite, the printed circuit board in 3D

    HPM5361-RMCS Slave Lite

    Kaiser041224/HPM5361-RMCS_Slave-Lite

    HPM5361-RMCSSlave-Lite 是一个基于 HPM5361IEG1 的嵌入式控制板。以下说明是根据当前 KiCad 工程中的原理图层级、器件选型和 PCB 丝印整理出来的硬件简介;从接口组合来看,这块板更像是一个面向机器人或分布式控制系统的从控/通信节点。

    179 parts1
  • 2 layers303.2 × 95.3 mmCcd65, the printed circuit board in 3D

    Ccd65

    westfoxtrot/ccd65

    Generic 65% PCB and variants used in CCD's keyboard projects

    178 partsCC-BY-SA-4.0
  • 4 layers70.8 × 108 mmCastor and Pollux, the printed circuit board in 3D

    Castor and Pollux

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    235 parts587

Questions

What parts does the KitSamD21 vE use?

27 parts, built around the ATSAMD21G18A-AU, 1N4148WS and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KitSamD21 vE KiCad files?

From the ernestalfo/KitSAMD21 repository on GitHub, at the commit this page was made from: the board is KitSamD21_vE.kicad_pcb and its schematic KitSamD21.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the KitSamD21 vE design in my own project?

Its repository states no licence, so its author keeps all rights: ask ernestalfo before reusing the design.