2 layers272.1 × 98 mm
SP56
ericrlau/SP56
Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.
195 parts9CC-BY-SA-4.0
2 layers272.1 × 112.3 mm
Panel
ericrlau/SP569Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.
- Size
- 272.1 × 112.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 198
- Nets
- 77
- Pads
- 790
- Tracks, vias
- 1,240, 187
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210108)
- Created
- 6 Dec 2020
- Updated
- 1 Apr 2021
Overview
Panel is an open-source printed circuit board by ericrlau, from the ericrlau/SP56 repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 272.1 × 112.3 mm with 198 parts on 77 nets, routed with 1,240 tracks and 187 vias.
It is built around the E73-2G4M08S1C, AP2112K-3.3 and LN2054Y42AMR, with the A03407A and SM02B-SRSS-TB(LF)(SN) among its other parts. Its parts include 62 diodes, 56 switches, 16 resistors, 10 capacitors and 6 ICs. It belongs with the keyboards and input boards of this library.
Main components
5
E73-2G4M08S1C
SMD,18x13mm-103dBm、-95dBm -40℃~+85℃ 120m 17.05mA 3.3V 8.27mA 8dBm Bluetooth 5.0、Bluetooth 4.2 PWM、SPI、ADC、USB、I2C、ISP、JTAG、DMA nRF52840 Chip SMD,18x13mm Bluetooth Modules ROHSChengdu Ebyte Elec TechBluetooth Modules
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedLN2054Y42AMR
SOT-23-5L-40℃~+85℃ 1 2uA 4.25V~6.5V 4.2V 500mA Charging IC Lithium Battery SOT-23-5L Battery Management ROHSNATLINEARBattery Management
A03407A
SOT-23SOT-23 New Arrivals ROHSAlpha & Omega SemiconductorUncategorised
SM02B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x2P 2 2.9mm 2P 4.32mm 4mm 50V Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board Connector
README
README.mdSP56
A ZMK-Powered BLE Keyboard, Inspired By Lily58 & Sofle
:warning: This is a partially tested project. Do not use to create your own copy unless you are willing to debug the hardware and/or firmware.
Flash bootloader
Bootloader is pre-loaded on assembled pcbs. If you source your own BLE module you will need to unlock the module and flash the bootloader using the Nordic nrf command line tool.
$ nrfjprog --recover --log $ nrfjprog -f nrf52 --program firmware/bootloader/COBO_nrf52840_bootloader-0.3.2-184-g64ea299_s140_6.1.1.hexUpload Firmware
- See ZMK docs for instructions on setting up ZMK and custimizing firmware.
- Default *.uf2 files are pre-loaded on assembled pcbs. If you sourced and assembled your own pcb, you can file deafult pre-built firmware here:
PCB
- Source files for pcb are in this repo. They are split into three kicad projects:
- SP56: main pcb, left and right combined.
- SP56_Bottom: Bottom cover PCB. Left and right use the same part so only one copy is created.
- SP56_Plate: Switch plate PCB. This must be 1.2mm pcb to allow Kaihl Choc V1 switches to snap in. Left and right use the same part so only one copy is created.
- NOTE: KiCad files are created with nightly KiCad 5.99 builds, they are not compatible with current stable release of KiCad 5.
- Bill of materials BOM Link
Build Guide For PCBA
Images
Prototype Build
Main PCB
FR4 Plate
Bottom PCB
Parts
198| Qty | Value | Footprint | References |
|---|---|---|---|
| 56 | D | Diode_SMD:D_SOD-123 | D1, D1, D10, D10, D11, D11, D12, D12, D13, D13, D14, D14, D15, D15, D16, D16 +40 |
| 52 | SW_PUSH | BlueSof:KailhLowProfile | SW1, SW1, SW10, SW10, SW11, SW11, SW12, SW12, SW13, SW13, SW14, SW14, SW15, SW15, SW16, SW16 +36 |
| 12 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4 | H1, H1, H2, H2, H3, H3, H4, H4, H5, H5, H6, H6 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R1, R6, R6 |
| 4 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C3, C4, C4 |
| 4 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C1, C2, C2 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R7, R8, R8 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D31, D31, D32, D32 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R9 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R2 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C5 |
| 2 | 1N5819 | Diode_SMD:D_SOD-323_HandSoldering | D33, D33 |
| 2 | 2M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R5 |
| 2 | 32.768kHz | Crystal:Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm_HandSoldering | Y1, Y1 |
| 2 | 820k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R4 |
| 2 | A03407 | Package_TO_SOT_SMD:SOT-23 | Q2, Q2 |
| 2 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3, U3 |
| 2 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | SWD/C, SWD/C1 |
| 2 | E73-2G4M08S1C | BlueSof:E73-2G4M08S1C-52840_minimal_inside_pads | U2, U2 |
| 2 | LN2054Y42AMR | Package_TO_SOT_SMD:SOT-23-5 | U1, U1 |
| 2 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW25, SW25 |
| 2 | SM02B-SRSS-TB(LF)(SN) | BlueSof:SM02B-SRSS-TB(LF)(SN) | J12, J12 |
| 2 | SW_PUSH | BlueSof:KailhLowProfile_1.5U | SW26, SW26 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | RESET, RESET |
| 2 | SW_SPDT | BlueSof:SW-TH_MSK12C02 | BATT_SW, BATT_SW |
| 2 | USB_C_Receptacle_USB2.0 | BlueSof:USB-C_C168688 | J1, J1 |
The 176 most common of 198 parts.
Questions
How big is the Panel PCB?
It measures 272.1 × 112.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel use?
198 parts, built around the E73-2G4M08S1C, AP2112K-3.3, LN2054Y42AMR and A03407A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the ericrlau/SP56 repository on GitHub, at the commit this page was made from: the board is PCB/REF_Panel/Panel.kicad_pcb and its schematic PCB/REF_Panel/REF_Panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from ericrlau/SP56
3- 2 layers134.8 × 98 mm
SP56 Plate
ericrlau/SP56
Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.
38 parts9CC-BY-SA-4.0 - 2 layers134.8 × 98 mm
SP56 Bottom
ericrlau/SP56
Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.
8 parts9CC-BY-SA-4.0
Similar boards
- 4 layers101 × 80.5 mm
Mari stm32 datalogger
Marimugeshbabu/STM32-Industrial-Data-Logger
4-layer STM32 Industrial Data Logger designed in KiCad 9 with RS485, microSD, voltage/current sensing and protection circuitry.
57 parts - 4 layers
- 2 layers266.7 × 81.4 mm
- 2 layers20 × 45 mm
Lora board
acseka360/sws_lbn
The interactive BOM webpage helps during assembly. You can mark components placed and check their exact types.
32 parts1 - 2 layers305.8 × 120.2 mm
- 2 layers139.3 × 72.4 mm
Chocofi PCB
wallago/chocofi-PCB
KiCad PCB design for the chocofi, a 34-key wireless split keyboard
63 parts - 2 layers76.2 × 76.2 mm
4x4 backpack
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
50 parts100BSD-3-Clause - 2 layers18.1 × 33.3 mm
