
Panel
ericrlau/SP56
Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.

Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.
SP56 Plate is an open-source printed circuit board by ericrlau, from the ericrlau/SP56 repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 134.8 × 98 mm with 38 parts on 10 nets.
Its parts include 28 switches and 2 diodes. It belongs with the keyboards and input boards of this library.
:warning: This is a partially tested project. Do not use to create your own copy unless you are willing to debug the hardware and/or firmware.
Bootloader is pre-loaded on assembled pcbs. If you source your own BLE module you will need to unlock the module and flash the bootloader using the Nordic nrf command line tool.
$ nrfjprog --recover --log $ nrfjprog -f nrf52 --program firmware/bootloader/COBO_nrf52840_bootloader-0.3.2-184-g64ea299_s140_6.1.1.hex



| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | SW_PUSH | BlueSof:PlateCutout14mm_EdgeCuts | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +11 |
| 8 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_ISO7380 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 2 | LED | MountingHole:MountingHole_2.2mm_M2_ISO7380 | D31, D32 |
| 1 | Rotary_Encoder_Switch | BlueSof:PlateCutoutEncoder_EdgeCuts | SW25 |

ericrlau/SP56
Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.

ericrlau/SP56
Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.

ericrlau/SP56
Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.

joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


It measures 134.8 × 98 mm and has 2 copper layers, 1.6 mm thick.
38 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ericrlau/SP56 repository on GitHub, at the commit this page was made from: the board is PCB/SP56_Plate/SP56_Plate.kicad_pcb and its schematic PCB/REF_Panel/REF_Panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).