2 layers50 × 50 mm
T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs
41 parts133
2 layers
My first Voltera PCB print using KiCad.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 12
- Pads
- 22
- Tracks, vias
- 29, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Jan 2017
- Updated
- 1 Jan 2017
Overview
V1-T1 is an open-source printed circuit board by epatel, from the epatel/First-Voltera-KiCad repository on GitHub. It is a 2-layer board with 7 parts on 12 nets, routed with 29 tracks and 0 vias.
It is built around the ATTINY85-15M. Its parts include 2 resistors, 2 diodes, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdFirst Voltera KiCad
Here are the project files I produced when trying to create my own PCB from scratch using KiCad.
The goal was to try out the Voltera One I bought via Kickstarter
All turned out fine and so far all cards has worked straight out of the machine.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LED | LEDs:LED_0603 | D1, D2 |
| 2 | R | Resistors_SMD:R_0603 | R1, R2 |
| 1 | Battery_Cell | ProjectParts:Battery_2032 | BT1 |
| 1 | SMDPushButton | ProjectParts:Button_SMD_6x6x6 | SW1 |
| 1 | attiny85 | ProjectParts:attiny85 | IC1 |
Similar boards
- 2 layers23 × 45 mm
- 2 layers41.1 × 110.7 mm
- 2 layers
- 2 layers40 × 30 mm
Test board
Guiimartinho/routeai
LLM-Powered Electronic Design Automation Platform for PCB Design
4 parts13 - 2 layers78.3 × 78.5 mm
50x70 tiny
rallekralle11/Tinyreflow
Inspired by afterearthltd's reflow plate, but using fewer and simpler components.
23 parts10 - 2 layers
MIDIMonkey
aleh/MIDIMonkey
Listens to MIDI messages on one pin and triggers drums on the others
8 parts9MIT - 2 layers46.9 × 41.4 mm
Questions
What parts does the V1-T1 use?
7 parts, built around the ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the V1-T1 KiCad files?
From the epatel/First-Voltera-KiCad repository on GitHub, at the commit this page was made from: the board is V1-T1/V1-T1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the V1-T1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask epatel before reusing the design.