

MECB 8088 CPU
- Size
- 99.8 × 99.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 96
- Pads
- 295
- Tracks, vias
- 1,205, 87
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jul 2024
- Updated
- 25 Oct 2026
Overview
MECB 8088 CPU is an open-source printed circuit board by epaell, from the epaell/MECB repository on GitHub. It is a 2-layer board of 99.8 × 99.8 mm with 27 parts on 96 nets, routed with 1,205 tracks and 87 vias.
It is built around the ATF22V10C-15PU, 74HCT7540D and 74HCT573D, with the AS6C4008-55PCN and TC1232CPA among its other parts. Its parts include 8 capacitors, 7 ICs, 2 connectors, 1 switch and 1 crystal. It belongs with the FPGA and CPLD boards of this library.
Main components
5ATF22V10C-15PU
PDIP-245V EEPLD PDIP-24 Programmable Logic Device (CPLDs/FPGAs) ROHSMicrochip TechnologyProgrammable Logic Device (CPLDs/FPGAs)74HCT7540D
SO-20-300mil-40℃~+125℃ 160uA 4.5V~5.5V 48ns@4.5V,50pF 6mA 6mA 74HCT 8 Output enable Schmitt trigger Tri-State Unidirectional SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver74HCT573D
SO-20-300mil-40℃~+125℃ 13ns 20ns 4.5V~5.5V 74HCT 8 8uA 9ns D Latch Tri-State SOIC-20 Latches ROHSNexperiaLatchesAS6C4008-55PCN
PDIP-320℃~+70℃ 2.7V~5.5V 30mA 4Mbit 4uA 55ns Parallel Port (Parallel) PDIP-32 SRAM ROHSAlliance MemorySRAMTC1232CPA
PDIP-8-40℃~+85℃@(Ta) 1 250ms 4.62V 4V~5.5V Active Low Open-drain、Push-pull Voltage monitor Watchdog timer、Manual reset input PDIP-8 Supervisor and Reset ICs ROHSMicrochip TechnologySupervisor And Reset ICs
README
SDCardShield/README.mdSDCardShield
A version of the SD Card shield that was originally developed by Corsham Technologies for the SWTPC. It has been modified to work with the MECB I/O board (PIA port) and makes use of Adafruit modules to implement the realtime clock:
https://core-electronics.com.au/adafruit-ds3231-precision-rtc-breakout.html
and microSD interface:
https://core-electronics.com.au/microsd-card-breakout-board.html
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 4K7 | Resistor_THT:R_Array_SIP9 | RN1, RN2 |
| 1 | 74HCT573 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U5 |
| 1 | 74HCT75 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U6 |
| 1 | 8 MHz | Package_DIP:DIP-4-8_W7.62mm_Socket_LongPads | Y1 |
| 1 | 8088-2 | Package_DIP:DIP-40_W15.24mm_Socket_LongPads | U7 |
| 1 | AS6C4008-55 | Package_DIP:DIP-32_W15.24mm_Socket_LongPads | U3 |
| 1 | ATF22V10C-15PU | MyCustomFootprintLibrary:DIP-24_W7.62mm_Socket_LongPads_ZIF_Friendly | U1 |
| 1 | CLK_SEL | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | MECB_64AC | MyCustomFootprintLibrary:DIN41612_C_2x32_C64AC_Male_Horizontal_THT | J1 |
| 1 | SST39SF040 | Package_DIP:DIP-32_W15.24mm_Socket_LongPads | U2 |
| 1 | SW_DIP_PB | Button_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTR | SW1 |
| 1 | TC1232CPA | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U4 |
More from epaell/MECB
10- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers139.8 × 53.3 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers99.8 × 99.8 mm

- 2 layers80 × 67.5 mm

Similar boards
- 4 layers273 × 178 mm

Pico thing
markrvmurray/pico-thing
An 8-bit MC6809E / HD6309E single-board computer with a pair of Raspberry Pi Pico 2 (RP2350 / Pimoroni PGA2350) modules acting as intelligent bus peripherals, a 1–2 MB banked-RAM DAT/MMU, a 40-pin PATA hard-disk…
206 parts1BSD-2-Clause - 2 layers100 × 100 mm

WD1771 Board
roberto314/Unicomp3
A modular 8-bit Computer able to recreate (nearly) every Retro computer of the late 70s to mid 80s.
122 partsBSD-2-Clause - 2 layers100 × 150 mm

Music2xxx
fordp2002/music2xxx
A clone of the Hybrid Music2000 Midi interface for the Acorn BBC Microcomputer
57 parts1 - 4 layers101.6 × 53.3 mm

- 2 layers176.5 × 85.1 mm

- 2 layers172.1 × 108 mm

Mb88-testboard
ifilot/morseboard-8088
Single board computer designed around the 8088 processor
81 parts - 4 layers160 × 100 mm

- 2 layers65.7 × 63 mm

Msx printer interface
tangent3D/msx_printer_interface
Low-cost printer cartridge for MSX models and FPGA implementations that do not feature a standard printer port
11 parts
Questions
How big is the MECB 8088 CPU PCB?
It measures 99.8 × 99.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MECB 8088 CPU use?
27 parts, built around the ATF22V10C-15PU, 74HCT7540D, 74HCT573D and AS6C4008-55PCN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MECB 8088 CPU KiCad files?
From the epaell/MECB repository on GitHub, at the commit this page was made from: the board is MECB_8088/MECB_8088_CPU/MECB_8088_CPU.kicad_pcb and its schematic 68008Tester/68008test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MECB 8088 CPU design in my own project?
Its repository states no licence, so its author keeps all rights: ask epaell before reusing the design.