Skip to the content
2 layers320.8 × 99.3 mmEnvKB65, the printed circuit board in 3D

A 65% Custom Mechanical Keyboard.

Size
320.8 × 99.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
147
Nets
103
Pads
646
Tracks, vias
356, 8
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
16 May 2021
Updated
24 Sep 2023

Overview

EnvKB65 is an open-source printed circuit board by Envious-Data, from the Envious-Data/Env-KB65M repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 320.8 × 99.3 mm with 147 parts on 103 nets, routed with 356 tracks and 8 vias.

It belongs with the RP2040 boards of this library.

README

README.md

Env-KB65M

A 65% Custom Mechanical utilising the raspberry pi pico.

About

A compact 65% design featuring ISO and ANSI layout support as well as a triple split spacebar. I designed this on a whim so its design can be considered somewhat quirky.

Firmware

If you need a pre-built QMK firmware for this keyboard you can find it here and here

how to flash

  • hold BOOTSEL button while plugging in USB
  • A USB Drive will show up, drag and drop the UF2 file linked above into the Drive
  • Done!

Parts

147
QtyValueFootprintReferences
701n4148Diode_SMD:D_SOD-123D_0, D_1, D_2, D_10, D_11, D_12, D_13, D_14, D_15, D_16, D_17, D_18, D_19, D_20, D_21, D_22 +54
70MX Switchenvextras:SW_Kailh_Choc_V2K_0, K_1, K_2, K_10, K_11, K_12, K_13, K_14, K_15, K_16, K_17, K_18, K_19, K_20, K_21, K_22 +54
6MountingHoleMountingHole:MountingHole_4.3mm_M4H0, H1, H2, H3, H4, H5
1PicoMCU_RaspberryPi_and_Boards:RPi_Pico_SMD_THU0

More from Envious-Data/Env-KB65M

2
  • 2 layers322.3 × 99.3 mmEnvKB65HS, the printed circuit board in 3D

    EnvKB65HS

    Envious-Data/Env-KB65M

    A 65% Custom Mechanical Keyboard.

    160 parts8GPL-3.0
  • 2 layers320.8 × 99.3 mmEnvKB65, the printed circuit board in 3D

    EnvKB65

    Envious-Data/Env-KB65M

    A 65% Custom Mechanical Keyboard.

    157 parts8GPL-3.0

Similar boards

  • 2 layers327.9 × 139 mmCoco2, the printed circuit board in 3D

    Coco2

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    147 parts446
  • 2 layers139.1 × 107.7 mmLotus58 Glow 150, the printed circuit board in 3D

    Lotus58 Glow 150

    TweetyDaBird/Lotus-58-Classic

    A split ergo linear keyboard derived from the Lily58 family

    147 parts390
  • 2 layers100 × 100 mmNA6 v1.3, the printed circuit board in 3D

    NA6 v1.3

    speeduino/Hardware

    Official Speeduino hardware designs

    147 parts283
  • 2 layers165.1 × 134.9 mmJonkey v1, the printed circuit board in 3D

    Jonkey v1

    AtomicJon/jonkey

    The JONKEY is a columnar split keyboard created using ergogen.

    147 parts33
  • 2 layers58.5 × 88 mmFugu2, the printed circuit board in 3D

    Fugu2

    fl4p/Fugu2

    Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources

    147 parts24
  • 2 layers60.5 × 100 mmOpensolar, the printed circuit board in 3D

    Opensolar

    junglejim8/opensolar

    Maximum Power Point Tracking Solar Charge Controller 100V input, 65amp

    147 parts23
  • 2 layers101.6 × 99.7 mmKarabas nano karabas nano revB, the printed circuit board in 3D

    Karabas nano karabas nano revB

    PCBench/PCBench

    resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…

    147 parts21MIT

Questions

How big is the EnvKB65 PCB?

It measures 320.8 × 99.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the EnvKB65 use?

147 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EnvKB65 KiCad files?

From the Envious-Data/Env-KB65M repository on GitHub, at the commit this page was made from: the board is MainPCB-ChocV2/EnvKB65.kicad_pcb and its schematic MainPCB-ChocV2/EnvKB65.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EnvKB65 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).