2 layers320.8 × 99.3 mm
2 layers322.3 × 99.3 mm
EnvKB65HS
Envious-Data/Env-KB65M8A 65% Custom Mechanical Keyboard.
- Size
- 322.3 × 99.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 160
- Nets
- 104
- Pads
- 917
- Tracks, vias
- 396, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 May 2021
- Updated
- 24 Sep 2023
Overview
EnvKB65HS is an open-source printed circuit board by Envious-Data, from the Envious-Data/Env-KB65M repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 322.3 × 99.3 mm with 160 parts on 104 nets, routed with 396 tracks and 16 vias.
It is built around the SMTWE2035MTJ. Its parts include 1 IC and 1 connector. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdEnv-KB65M
A 65% Custom Mechanical utilising the raspberry pi pico.
About
A compact 65% design featuring ISO and ANSI layout support as well as a triple split spacebar. I designed this on a whim so its design can be considered somewhat quirky.
Firmware
If you need a pre-built QMK firmware for this keyboard you can find it here and here
how to flash
- hold BOOTSEL button while plugging in USB
- A USB Drive will show up, drag and drop the UF2 file linked above into the Drive
- Done!
Parts
160| Qty | Value | Footprint | References |
|---|---|---|---|
| 73 | KEYSW | MX_Only:MXOnly-1U-Hotswap-Modified | K_0, K_1, K_2, K_10, K_11, K_12, K_13, K_14, K_15, K_16, K_17, K_18, K_19, K_20, K_21, K_22 +57 |
| 71 | 1n4148 | Diode_SMD:D_SOD-123 | D_0, D_1, D_2, D_10, D_11, D_12, D_13, D_14, D_15, D_16, D_17, D_18, D_19, D_20, D_21, D_22 +55 |
| 7 | STABILIZER | Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_2u | ST1, ST2, ST3, ST4, ST5, ST6, ST7 |
| 6 | C2928180 | MountingHole:MountingHole_3.5mm | H0, H1, H2, H3, H4, H5 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | G*** | kibuzzard-62927A63 | kibuzzard-62927A63 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U0 |
More from Envious-Data/Env-KB65M
2- 2 layers320.8 × 99.3 mm
Similar boards
- 2 layers133.6 × 93 mm
- 2 layers78.7 × 32.4 mm
Flipper pb
ADolbyB/flipper-zero-files
A Collection Of Files From Various Sources Specifically For The Flipper Zero Device (In Progress)
160 parts265 - 2 layers245.2 × 100 mm
V5 main
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
160 parts156 - 2 layers321.8 × 129.3 mm
Pico keyboard v1
zli117/Pico-Keyboard
Hardware design for a mechanical keyboard based on RP2040
160 parts104CC-BY-SA-4.0 - 2 layers100 × 100 mm
- 2 layers285 × 94.5 mm
Rmk ble keyboard
HaoboGu/rmk-ble-keyboard
A fully open source BLE/USB dual-mode GH60 keyboard powered by rmk
160 parts42GPL-3.0 - 2 layers50 × 52 mm
- 2 layers214.6 × 70.5 mm
Questions
How big is the EnvKB65HS PCB?
It measures 322.3 × 99.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EnvKB65HS use?
160 parts, built around the SMTWE2035MTJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EnvKB65HS KiCad files?
From the Envious-Data/Env-KB65M repository on GitHub, at the commit this page was made from: the board is MainPCB-HOTSWAP/EnvKB65HS.kicad_pcb and its schematic MainPCB-ChocV2/EnvKB65.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EnvKB65HS design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).