

SparrowX
All-in-one CAN-FD ECU core board
- Size
- 31.6 × 26.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 75
- Pads
- 213
- Tracks, vias
- 452, 146
- Pours
- 19
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Feb 2024
- Updated
- 11 Dec 2025
Overview
SparrowX is an open-source printed circuit board by enp6s0, from the enp6s0/TinySparrow repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 31.6 × 26.6 mm with 31 parts on 75 nets, routed with 452 tracks and 146 vias.
It is built around the STM32G0B1CBU6, TCAN332GD and LMR43610MSC3RPERQ1, with the LD49100PU33RY, NUP2105L and SMF26A among its other parts. Its parts include 11 capacitors, 5 ICs, 5 diodes, 4 resistors and 4 connectors. It belongs with the STM32 boards of this library.
Main components
7STM32G0B1CBU6
UFQFPN-48(7x7)-40℃~+85℃ 1.7V~3.6V 128KB 144KB 32 Bit 44 64MHz ARM Cortex-M0+ Built-in+External FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TCAN332GD
SOIC-8-40℃~+125℃ 3V~3.6V 5Mbps CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversLMR43610MSC3RPERQ1
VQFN-9-HR(2x2)-40℃~+150℃@(TJ) 1 1.5uA 1A 200kHz~2.2MHz 3V~36V Adjustable Buck Buck Built-in Yes VQFN-9-HR(2x2) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLD49100PU33RY
DFN-6(3x3)-40℃~+125℃@(Tj) 1 1A 200mV@(1A) 20uA 3.3V 5.5V 70dB@(1kHz) 85uVrms Fixed PG Pin、Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsNUP2105L
SOT-23-55℃~+150℃ 100nA 2 24V 30pF 32V 350W@8/20us 44V 8A@8/20us Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)SMF26A
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiachengSTPS2H100ZFY
SOD-123FSchottky DiodesSTMicroelectronics
README
readme.mdTinySparrow
A compact, low(ish)-cost, CAN-FD enabled core board for all sorts of automotive shenanigans (and beyond)!

Ever wanted to integrate CAN bus functionality into your projects, but didn't want to deal with laying out all the commonly used parts every single time?
Then TinySparrow is for you! Now in its 2nd generation, this cute little board combines a STM32G0X1 MCU, 2x CAN-FD transceivers and power regulation all in a single board, ready to be integrated in all your CAN-enabled device ideas.
General specifications
-
Compact footprint:
32 x 27 mm -
QFN-48 STM32G0x1 series ARM Cortex-M0+ microcontroller
- Ships with STM32G0B1CBU6 by default (128K flash, 144K RAM)
- Also compatible with STM32G0C1CEU6 should you want more RAM/flash or hardware crypto
- Crystal-less USB device capability
-
Dual CAN-FD (up to 5Mbps)
- Texas Instruments TCAN332G PHYs
- CAN bus ESD diodes included (probably a good idea to add another near connectors though)
-
2-stage automotive power supply
- Much wider input range: 5 to 25 VDC in!
- "Batteries included" protection: reverse polarity and voltage clamping diodes onboard
- 3.3 VDC system voltage (~500mA available for extra peripherals)
- Texas Instruments LMR43610-Q1 buck converter (first stage)
- STMicroelectronics LD49100 linear regulator (second stage)
-
2.54mm "pin grid array" I/O connectors
- 72 total pins available, 61 currently used (all unused MCU pins available)
- 11 pins reserved for future use (with other boards/revisions)
- Easy to solder / design carrier boards for :)
Module pinout
- Top left corner identified by golden notch
- Pins marked with
xare reserved for future use (do not connect)
| Key (no pin) | GND | GND | x | x | x | x | GND | x | x | x | GND |
| PA10 | USB+ (PA12) | USB- (PA11) | CAN0 H | CAN0 L | CAN1 H | CAN1 L | GND | x | x | x | PB14 |
| nRESET (PF2) | +3V3 (PROG) | PB13 | PB12 | ||||||||
| SWCLK (PA14) | SWDIO (PA13) | PB11 | PB10 | ||||||||
| PD2 | PA15 | GND | PB2 | ||||||||
| PB3 | PD3 | PB15 | PA8 | ||||||||
| PB4 | PB5 | PA9 | PC6 | ||||||||
| PB6 | PB7 | Power good | PC7 | ||||||||
| PB8 | PB9 | PC13 | PC15 | +3V3 | PF1 | PA1 | PA3 | PA5 | PA7 | x | GND |
| GND | GND | PC14 | +VBAT | +3V3 | PF0 | PA0 | PA2 | PA4 | PA6 | GND | +VDC (in) |
Revision/stepping info
A1: initial release for Gen2 designA2: ESD diode routing fixes, lighter application of via-in-pad to improve manufacturability (Breaking pinout change: SWDIO/SWCLK swap, +VDC in moved)
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1 uF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C5, C7, C8, C10, C11 |
| 3 | NUP2105L | Package_TO_SOT_SMD:SOT-23 | D2, D3, D4 |
| 2 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C1, C6 |
| 2 | TCAN332G | Package_TO_SOT_SMD:SOT-23-8 | U4, U5 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10 uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 12K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 2.2 uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 38K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | EAST | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J4 |
| 1 | LD49100PU33RY | footprint:DFN6_LD49100_STM | U2 |
| 1 | LMR43610MSC3RPERQ1 | footprint:RPE0009A-MFG | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | NORTH | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | SMF26A | Diode_SMD:D_SOD-123F | D5 |
| 1 | SOUTH | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | STM32G0B1CBU6 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U3 |
| 1 | STPS2H100ZFY | Diode_SMD:D_SOD-123F | D1 |
| 1 | WEST | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J3 |
Similar boards
- 4 layers70 × 56 mm

- 6 layers40.6 × 40.5 mm

Flight Controller
desanv01/Flight-Controller-V2
STM32H743 controller: regulated power, signal-only ESC, neutral ArduPilot firmware, manufacturing data and engineering history.
169 partsCERN-OHL-S-2.0 - 4 layers72.5 × 34 mm

- 4 layers220 × 100 mm

- 2 layers50 × 40 mm

STM32 CAN USB
mihircn/stm32-usb-can-fd-adapter
STM32G0B1-based USB-to-CAN FD adapter designed in KiCad.
31 parts1 - 4 layers76.2 × 48.3 mm

- 4 layers358 × 40 mm

Longboi
KungfuPancake/longboi
Possibly the longest controller board to control the BoxTurtle AFC
297 parts7Apache-2.0 - 4 layers65 × 45 mm

STM32F446VE Module v1
pipipipi2002/stm32f446vetx-dev-module
Dev Module for STM32F446VETx
88 parts2GPL-3.0
Questions
How big is the SparrowX PCB?
It measures 31.6 × 26.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SparrowX use?
31 parts, built around the STM32G0B1CBU6, TCAN332GD, LMR43610MSC3RPERQ1 and LD49100PU33RY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SparrowX KiCad files?
From the enp6s0/TinySparrow repository on GitHub, at the commit this page was made from: the board is SparrowX.kicad_pcb and its schematic SparrowX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SparrowX design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).