
Line sensor
enenflash/YounglingSlayer
team repository for Robocup Junior Lightweight Australia 2024

team repository for Robocup Junior Lightweight Australia 2024
Main pcb top is an open-source printed circuit board by enenflash, from the enenflash/YounglingSlayer repository on GitHub. It is a 2-layer board of 62 × 47 mm with 16 parts on 24 nets, routed with 91 tracks and 10 vias.
It is built around the HC-05. Its parts include 6 connectors, 2 capacitors, 2 switches, 1 resistor and 1 diode.
Team repository for Robocup Junior Lightweight Australia 2024
We use C++ in ArduinoIDE to program our microcontroller (Teensy 4.1). (See code-explanations) We also use Raspberry Pi Pico as part of our line sensor.
We design our parts in Fusion360. (See mechanical design/) All parts are printed in PLA.
We design our PCBs in KiCAD 7.0 and order from JLCPCB. (See pcbs/). The schematics are based on circuits we tested using breadboards.
All designs are original other than the BBR IR Seeker
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 1 | 22R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | BATT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | BNO Left | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | BNO Right | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | Comm. wire | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J6 |
| 1 | HC-05 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | Idle Switch | Altronics:Switch_DPDT_S2060 | SW1 |
| 1 | LCD | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Power Switch | Altronics:Switch_SPDT_S2070 | SW2 |

enenflash/YounglingSlayer
team repository for Robocup Junior Lightweight Australia 2024

enenflash/YounglingSlayer
team repository for Robocup Junior Lightweight Australia 2024

NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition


duongngochoan/Self_balancing_robot_PID
Used a PID control algorithm and MPU605 sensor to balance a two-wheeled robot.

leikoilja/muscle-imbalance-detection
A device to assist patients with the rehabilitation of the knee joint after a knee surgery using EMG biofeedback. The device can reliably detect muscle activity and display it in an easy-to-use mobile application.

xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.



It measures 62 × 47 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the HC-05. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the enenflash/YounglingSlayer repository on GitHub, at the commit this page was made from: the board is pcbs/main_pcb_top/main_pcb_top.kicad_pcb and its schematic pcbs/line_sensor-26-08/line_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask enenflash before reusing the design.