4 layers39 × 119.5 mm
2 layers35.1 × 17.6 mm
Led pcb
EmbryoPhenomics/FieldCamSubmersible field camera and sensor instrument
- Size
- 35.1 × 17.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 6
- Pads
- 26
- Tracks, vias
- 50, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Sep 2026
- Updated
- 14 Sep 2026
Overview
Led pcb is an open-source printed circuit board by EmbryoPhenomics, from the EmbryoPhenomics/FieldCam repository on GitHub. It is a 2-layer board of 35.1 × 17.6 mm with 11 parts on 6 nets, routed with 50 tracks and 9 vias.
It is built around the VEML6030. Its parts include 4 connectors, 2 diodes, 1 capacitor, 1 resistor and 1 IC.
Main components
1README
README.mdFieldCam
A submersible field camera and sensor instrument
FieldCam is a versatile, waterproof imaging and sensing instrument, powered by consumer AA batteries and capable of long term timelapse imaging out in the field.
Some of the key specifications of this instrument are as follows:
| Component | Description |
|---|---|
| Waterproof enclosure | Acrylic tube with aluminium end caps rated to 130m depth |
| Battery | 17.1 Ah AA battery pack (~24 hrs continuous video recording). Capacity for additional 22.8 Ah AA battery pack (~30 hrs). Low power mode is > 10 years with continuous system and sensor monitoring (5 second resolution) |
| Processors | STM32 L4 microcontroller for system control and low power standby. Raspberry Pi Zero 2W for video and image capture, 32gb and 1Tb SD cards for storage respectively |
| Camera sensor | CMOS 12-megapixel (Sony IMX708) |
| Video resolution | 1080p50fps maximum. Resolution and framerate can be configured using built-in app |
| Focus | Phase Detection Autofocus (PDAF) or manual adjustable focus. Range 5cm to > 2m. |
| Camera parameters | Exposure (Auto or manual), analogue gain and auto-white balance modes can all be configured via Web App |
| Lighting | Built-in adjustable LEDs (x2) with up to 170 lm each |
| Sensors | Temperature and light built-in. Pressure, salinity, pH and O2 available with additional sensor pack |
| Configuration | Setup via Web App using smartphone or laptop, connected to the instrument’s wifi hotspot. Web App enables live streaming and config of camera sensor, viewing of system status and programming of experimental schedule. All data, including video and sensor logs can be downloaded via network file sharing when in setup mode |
| Dimensions | 70 mm x 195 mm |
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x01_Socket | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J1, J2 |
| 2 | Conn_01x04_Socket | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J3, J4 |
| 2 | LED | jlcpcb:LED-SMD_L3.5-W2.8-R-FD-WHITE | D1, D2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C38 |
| 1 | 10kR | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | VEML6030 | jlcpcb:VISHAY_VEML6030_2X2X0.87 | U10 |
More from EmbryoPhenomics/FieldCam
12- 4 layers39 × 119.5 mm
- 2 layers38.5 × 31.8 mm
- 2 layers19.3 × 46.1 mm
- 2 layers47.9 × 34.7 mm
- 2 layers20.4 × 47.9 mm
- 2 layers20.4 × 47.9 mm
- 2 layers20.4 × 47.9 mm
- 2 layers48.2 × 34.7 mm
- 2 layers48.2 × 34.7 mm
- 2 layers35 × 17.6 mm
- 2 layers10 × 23.2 mm
Similar boards
- 4 layers25.6 × 23.6 mm
CANNONBALL
user-will/PCB_CANNONBALL
An ESP32-C3 dev board with more sensors and features then you could know what to do with
61 parts14 - 4 layers44.5 × 50.6 mm
- 2 layers25.4 × 25.4 mm
PiicoDev Ambient Light Sensor VEML6030
CoreElectronics/CE-PiicoDev-Ambient-Light-Sensor-VEML6030
Hardware repo for the Core Electronics PiicoDev Ambient Light Sensor VEML6030
23 parts - 2 layers52.7 × 48.7 mm
AirQualitymonitoringESP
sankarax/AQM420
Air Quality Monitoring project which includes the Arduino script integrating everything into the Blynk IoT app, schematics and the pcb build
20 parts - 2 layers47.6 × 31.8 mm
- 2 layers17.4 × 14 mm
SateLight LightSensor
ChrisMeletis/satelight_pcb
A repository containing all the printed circuit boards for the SateLight project.
12 partsGPL-2.0 - 4 layers91.9 × 12.4 mm
Button board r2
picafe/bicolor-matrix-v2
A 32x8 bicolor LED matrix module composed of 4 8x8 matrices based on the Holtek HT16K33A I2C LED driver. V1 paired it with a stacked adapter (RP2040 Zero + DS3231 module); V2 redesigns the matrix routing and puts an…
12 parts - 2 layers60 × 30 mm
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0
Questions
How big is the Led pcb PCB?
It measures 35.1 × 17.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led pcb use?
11 parts, built around the VEML6030. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led pcb KiCad files?
From the EmbryoPhenomics/FieldCam repository on GitHub, at the commit this page was made from: the board is electronics/led_pcb/led_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask EmbryoPhenomics before reusing the design.