Skip to the content
2 layers111.5 × 55.8 mmTechLab, the printed circuit board in 3D

Hardware designs + EE docs + Board datasheets of Multiple products

Size
111.5 × 55.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
103
Nets
156
Pads
420
Tracks, vias
1,330, 290
Pours
1,471
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Apr 2026
Updated
2 Nov 2026

Overview

TechLab is an open-source printed circuit board by embeddedos-org, from the embeddedos-org/eCAD-Hardware-Products repository on GitHub, published under the MIT licence. It is a 2-layer board of 111.5 × 55.8 mm with 103 parts on 156 nets, routed with 1,330 tracks and 290 vias.

It is built around the FT230XQ-R, CAT24C32WI-GT3 and MCP23S18-E/MJ, with the MMA8453QT, SN74LV4053AD and TPD4S012DRYR-TP among its other parts. Its parts include 28 resistors, 13 capacitors, 7 ICs, 6 connectors and 2 fuses.

Main components

12

README

README.md

eCAD Hardware Products

CI CodeQL Scorecard License: MIT

Hardware / PCB CAD design collection for the EmbeddedOS (EoS) ecosystem. The repository organizes hardware product designs by application domain. Each domain holds one or more product lines, and each product line typically carries a product datasheet, a bill of materials (bom.csv), power-budget simulation scripts, and placeholder directories for PCB and mechanical CAD artifacts. Several product lines also include KiCad schematics (*.kicad_sch).

Status varies by design. Directories are at different maturity levels (many "Design" / "Pre-production"); PCB and CAD folders often contain .gitkeep placeholders rather than finished layouts. Check each design's own README.md and docs/ for its current state.

Domains

The repository contains 16 domain design collections:

DomainFocus
eAerospace_CAD_DesignAircraft components, avionics, UAV/drone systems, space systems
eConsumer_CAD_DesignSmart home devices, personal wearables, AR/smart devices
eCybersecurity_CAD_DesignSecurity appliances and physical security systems
eDefense_CAD_DesignSurveillance, tactical communications, protection equipment
eElectronics_CAD_DesignPCBs, embedded controllers, RF modules, FPGAs, AI accelerators
eEnergy_CAD_DesignBattery products, renewable energy systems, power electronics
eHealth365_CAD_DesignTwo-device health monitoring system (smart patch / smart ring)
eIndustrial_CAD_DesignSensors, industrial electronics, infrastructure equipment
eMedical_CAD_DesignDiagnostic, surgical, patient-care, laboratory equipment
eMining_CAD_DesignAutonomous mining/construction equipment, industrial safety systems
ePAM_CAD_DesignPersonal air/ground mobility — solar-hybrid transport, 4-product line
eRadar360_CAD_Design360° automotive safety radar + laser + V2X + AI threat detection
eRobotics_CAD_DesignIndustrial robots, autonomous systems, robot components
eSmartCity_CAD_DesignUrban infrastructure, utilities, telecommunications
eTransport_CAD_DesignAutomotive electronics, rail systems, maritime systems
eosHealth_CAD_DesignFour-device wearable health platform

Plus:

  • future_designs/ — early/prospective concepts (e.g. eBCI-Lite)
  • docs/ — repository-level documentation

Typical design layout

Most domains follow a common structure, for example:

text
eAerospace_CAD_Design/
  README.md
  docs/                      business_plan.md, regulatory_path.md
  ebuild_simulation/         eBuild simulation notes
  <product_line>/
    product_datasheet.md
    bom.csv
    simulation/power_budget_sim.py
    hardware/
      pcb/  cad/  antenna/   (artifact folders; often .gitkeep placeholders)

Artifact formats present in the repo include Markdown datasheets, CSV BOMs, Python simulation scripts, and KiCad schematics (*.kicad_sch). Some product lines also include TypeScript/Dart companion app sources and 3D-model notes.

Simulations

Power-budget simulations are plain Python scripts, runnable per product line:

bash
cd eAerospace_CAD_Design/<product_line>/simulation/
python3 power_budget_sim.py

Design docs reference the EoSim digital-twin platform for hardware-in-the-loop testing. Running one script alone does not establish that a product is validated.

Evidence-backed product validation

The committed tools/catalog/product_inventory.json is the complete product execution set. The v1 contract schemas and policy requirements are documented in docs/hardware-validation-contract-v1.md.

Discover inventory drift and inspect local tool capabilities:

bash
python3 tools/validate_products.py discover
python3 tools/validate_products.py capabilities

Execute V0-V4 for every inventoried product and write hash-bound receipts:

bash
python3 tools/validate_products.py validate \
  --all \
  --output /tmp/ecad-validation \
  --mode evidence
python3 tools/validate_products.py verify-bundle \
  /tmp/ecad-validation/bundle.json

--mode evidence succeeds when the selected inventory was executed and valid receipts were written. Individual products may still be honestly FAIL, BLOCKED, INCONCLUSIVE, or NOT_RUN. Use --mode gate for a release check; it succeeds only when every selected product has real PASS evidence for V0, V1, V2, V3, and V4. Historical baseline entries never waive a failed or missing requirement.

CAD dataset and engineering model

datasets/cad/ holds CAD dataset items for the multi-domain validation work in issue #27. Each item is a STEP design, the design intent the CAD cannot carry, and machine-readable requirements; the pipeline extracts it with the OpenCASCADE kernel, builds an engineering model in which every value states its source and status, and runs V0-V4 with domain simulators. UNKNOWN values are never filled in: a requirement that depends on one is BLOCKED.

bash
python3 -m pip install -r tools/requirements.txt -r tools/requirements-cad.txt
python3 tools/cad_dataset.py check    datasets/cad/robotic_joint_001
python3 tools/cad_dataset.py validate datasets/cad/robotic_joint_001 --output /tmp/joint-run

See datasets/cad/README.md and docs/cad-dataset-engineering-model-v1.md.

License

MIT — see LICENSE.

One exception: the EmbeddedOS original boards in boards/eos, their design files and the footprint library drawn for them are Copyright (c) 2026 Kartikeydheer Srivastava, all rights reserved, and are not under the MIT licence. The exact files are listed in boards/eos/README.md.

Parts

103
QtyValueFootprintReferences
15GREEN0805-LEDLD2, LD3, LD4, LD5, LD6, LD7, LD8, LD9, LD10, LD11, LD12, LD13, LD14, LD15, TX0
8.1uF0402C1, C2, C3, C4, C5, C8, C9, C10
81k0402R3, R4, R11, R12, R13, R14, R21, R22
4@HOLE0, @HOLE1, @HOLE2, @HOLE3
4120 Ohm (BLM18AG121SN1D)0603FB1, FB2, FB3, FB4
41KResistor:R0804RN1, RN2, RN3, RN4
34.7k0402R5, R17, R18
3FIDUCIALFIDUCIAL_40MILFUD1, FUD2, FUD3
21.5k0402R1, R2
21206L025YR1206F1, F2
2330402R9, R10
24.7KResistor:R0402R27, R28
25.1KUpside Down Labs:0402R19, R20
2Conn_01x08Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1RightMKB-1, MKB-2
2Conn_02x18_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical_SMDP1, P2
2DNP(2.2k)0402R15, R16
2SOLDER.JOINT-(INCH)-0402SOLDER.JOINT(0402)SJ1, SJ2
2TACTILE.SWITCH-6MM6MM_TACTILE-SWITCHL.BTN0, R.BTN0
100402R8
10RResistor:R0603R26
1100KUpside Down Labs:0402R25
1100k0402R6
110KUpside Down Labs:0402R23
110KResistor:R0402R24
110nF0402C11
110uFCapacitor_SMD:C_0603_1608MetricC12
110uF, 6.3V0805C7
11N4148WDiode:SOD-123D1
11X4P-1MMConnector:HW4-SMD-1.0-90DJ1
11uFCapacitor:C0402C13
1292303-1292303-1X1
13904SOT23T1
14.7uF0402C6
1A2001WF-02AConnector:JST2+2P_2.0_PH_S2B-PH-SM4-TB_1x02-1MP_HorizontalJ4
1CAT24C32WI-GT3Ic:SOIC8-1.27-5X4MMU1
1DNP(1.5k)0402R7
1EAALSTIC1708A0EAALSTIC1708A0T2
1FT230XQ-RQFN16-0.65-4X4MMU6
1G***kibuzzard-68396DBEkibuzzard-68396DBE
1G***kibuzzard-68396DE6kibuzzard-68396DE6
1JST-SH-3PUpside Down Labs:JST-SH-3PJ3
1JUMPER-(X2)JUMPER-(X2)JMP1
1LTST-G563EGBWDiode:LED6P-5x5x1.6MMLD1
1MCP23S18-E/MJQFN24-MJ-0.5-4X4MMU5
1MLT-8530Misc:BZ4-SMD-8.5X8.5X3.0MMBUZ1
1MMA8453QQFN-16-(MMA8453Q)U3
1RED0805-LEDRX0
1SN74LV4053AUpside Down Labs:SOT-23-THN-16U7
1TPD4S012DRYSON-6(TI)-DRYU2
1TPS2051CDBVSOT23-5(TI-DBV)U4
1TS-1185F-WSwitch:SW4-SMD-4.5X3.2X2.5MMRESET.BTN0
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ2

More from embeddedos-org/eCAD-Hardware-Products

12
  • 2 layers161 × 132 mmSparkFun BMV080 panelized, the printed circuit board in 3D

    SparkFun BMV080 panelized

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    2,869 parts8MIT
  • 12 layers86.4 × 54.6 mmBeaglebone ai rev a2, the printed circuit board in 3D

    Beaglebone ai rev a2

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    766 parts8MIT
  • 16 layers280 × 200 mmQuantum control, the printed circuit board in 3D

    Quantum control

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    740 parts8MIT
  • 12 layers86.4 × 54.6 mmBeaglebone ai, the printed circuit board in 3D

    Beaglebone ai

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    718 parts8MIT
  • 12 layers160 × 120 mmBioelectronics, the printed circuit board in 3D

    Bioelectronics

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    641 parts8MIT
  • 16 layers420 × 300 mmInference servers, the printed circuit board in 3D

    Inference servers

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    637 parts8MIT
  • 16 layers280 × 200 mmSigint systems, the printed circuit board in 3D

    Sigint systems

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    631 parts8MIT
  • 2 layers131.8 × 131.8 mm13738-Lumenati 4-pack panel.v10, the printed circuit board in 3D

    13738-Lumenati 4-pack panel.v10

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    553 parts8MIT

Similar boards

  • 2 layers55 × 35 mmBaconbits, the printed circuit board in 3D

    Baconbits

    e-ale/BaconBitsCapeHW

    Design files for the Bacon Bits MiniCape for the PocketBeagle

    64 parts23
  • 2 layers57.5 × 72 mmESP32-Based Sensor PCB, the printed circuit board in 3D

    ESP32-Based Sensor PCB

    blazjerman/ESP32-Based-Sensor-PCB

    For updates or additional library formats, visit SnapEDA.

    77 parts4MIT
  • 2 layers61.8 × 66.7 mmMidiskirt-0.1a, the printed circuit board in 3D

    Midiskirt-0.1a

    barzamin/midiskirt

    a c64 midi cartridge

    28 parts1
  • 6 layers75 × 75 mmMibico RU, the printed circuit board in 3D

    Mibico RU

    mrbutterfly105/masters_thesis

    This is my master’s thesis repo.

    257 parts
  • 4 layers70.8 × 66.5 mmNic2, the printed circuit board in 3D

    Nic2

    oxidecomputer/hw-gimletlet-nic

    Daughterboard for the Gimletlet 2 which uses a KSZ8463 to break out two ethernet (RJ-45) connectors. In active use for Hubris development.

    53 partsMPL-2.0
  • 4 layers88 × 60 mmEmbedded v1, the printed circuit board in 3D

    Embedded v1

    sofiamonty/embedded-pcb-pt100

    4-layer KiCad PCB integrating a PT100 temperature sensor and SAMD21 microcontroller with LCD interface; includes schematics, layout, firmware, BOM, and PDF documentation.

    48 parts
  • 2 layers44 × 42.1 mmBreakoutBoards05, the printed circuit board in 3D

    BreakoutBoards05

    joeferner/breakoutBoards

    Collection of break out boards

    22 parts2
  • 4 layers62 × 22.2 mmUPduino v3.0, the printed circuit board in 3D

    UPduino v3.0

    tinyvision-ai-inc/UPduino-v3.0

    UPduino 3.0: new 4 layer layout, various other improvements

    116 parts365MIT

Questions

How big is the TechLab PCB?

It measures 111.5 × 55.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TechLab use?

103 parts, built around the FT230XQ-R, CAT24C32WI-GT3, MCP23S18-E/MJ and MMA8453QT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TechLab KiCad files?

From the embeddedos-org/eCAD-Hardware-Products repository on GitHub, at the commit this page was made from: the board is boards/cad/beagleboard/pocketbeagle-techlab-cape/cad/pocketbeagle/TechLab/kicad/TechLab.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the TechLab design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).