4 layers50 × 50 mm
Duino Coin
elVucko/Duino_Coin_AVR
This is the simplest DUINO coin mining board design with four Atmega328p and CH340 connected to the FE1.1S USB hub.
89 parts7MIT
4 layers50 × 50 mm
This is the simplest DUINO coin mining board design with four Atmega328p and CH340 connected to the FE1.1S USB hub.
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 187
- Pads
- 405
- Tracks, vias
- 859, 84
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Mar 2022
- Updated
- 16 Aug 2022
Overview
DUINO is an open-source printed circuit board by elVucko, from the elVucko/Duino_Coin_AVR repository on GitHub, published under the MIT licence. It is a 4-layer board of 50 × 50 mm with 93 parts on 187 nets, routed with 859 tracks and 84 vias.
It is built around the ATMEGA328P-AU, CH340G and FE1.1S, with the CSTCE16M0V13C99-R0 among its other parts. Its parts include 30 resistors, 19 capacitors, 14 diodes, 9 ICs and 9 crystals. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersFE1.1S
SSOP-28USB 2.0 USB Hub SSOP-28 USB Converters ROHSTerminus TechUSB Converters
CSTCE16M0V13C99-R0
SMD3213-3P-40℃~+125℃ 15pF 16MHz 40Ω SMD3213-3P Ceramic Resonators ROHSMurataCeramic Resonators
README
README.mdRead Me
Description
This is the simplest DUINO coin mining board design with four Atmega328p and CH340 connected to the FE1.1S USB hub. All that's needed to mine with this board is a micro USB/USB A cable to connect with a computer and the AVR_Miner application installed. One version of the PCB is with CH340C and for me, that version works great. But only the CH340C can be used here. Due to difficulties in buying quality chips, I did another design where CH340G is used. On this PCB, both versions of CH340 can be used without any problems. I made this design for fun and I hope it can be useful to someone.
All information regarding the DUINO can be found on the official website:
- https://duinocoin.com/
- https://duinocoin.com/getting-started
- https://github.com/revoxhere/duino-coin/releases/
If you want to support my work
Author Info
- Freelancer - https://www.freelancer.com/hireme/dvucko
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17 |
| 13 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11, R12, R13, R14, R15, R16, R21, R22, R23, R24, R30 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | Blue | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9, D10, D11, D12, D17 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18, R19, R20 |
| 4 | ATMEGA328P-AU | Vucko_Admin:QFP80P900X900X120-32N | IC1, IC2, IC3, IC4 |
| 4 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1, U2, U3, U4 |
| 4 | CSTCE12M | Vucko_Admin:CSTCE16M0V13C99R0 | Y6, Y7, Y8, Y9 |
| 4 | CSTCE16M0V13C99-R0 | Vucko_Admin:CSTCE16M0V13C99R0 | Y1, Y2, Y3, Y4 |
| 4 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3, J5, J6 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C21, C23 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R28 |
| 2 | Duino | Vucko_Admin_Logo:Duino | L1, L2 |
| 1 | 1 | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
| 1 | 12MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y5 |
| 1 | 2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D13 |
| 1 | 2 | MountingHole:MountingHole_3.2mm_M3 | H2 |
| 1 | 2.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29 |
| 1 | 3 | MountingHole:MountingHole_3.2mm_M3 | H3 |
| 1 | 4 | MountingHole:MountingHole_3.2mm_M3 | H4 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | FE1.1s | Package_SO:SSOP-28_3.9x9.9mm_P0.635mm | U5 |
| 1 | SS_PG | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J4 |
| 1 | USB_Micro | Connector_USB:USB_Micro-B_Amphenol_10104110_Horizontal | J1 |
Questions
How big is the DUINO PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DUINO use?
93 parts, built around the ATMEGA328P-AU, CH340G, FE1.1S and CSTCE16M0V13C99-R0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DUINO KiCad files?
From the elVucko/Duino_Coin_AVR repository on GitHub, at the commit this page was made from: the board is Duino_Coin_AVR/DUINO/CH340G/DUINO.kicad_pcb and its schematic Duino_Coin_AVR/DUINO/CH340C/Duino Coin.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DUINO design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from elVucko/Duino_Coin_AVR
1Similar boards
- 2 layers50.5 × 128.5 mm
- 2 layers60 × 50 mm
Vx8 gps prototype v2.0
4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
56 parts66MIT - 2 layers120 × 70 mm
BRNG
valerionew/Banana-Random-Number-Generator
Random number generator based on radioactivity from bananas
93 parts37 - 4 layers90 × 43 mm
Temperature Thing With Thermocouple 3V3
spacebiz24/Thermal-Profiling
A Thermal Profiling Platform built with ATMega328P and MAX31856
89 parts3MPL-2.0 - 4 layers102 × 49 mm
CURSO PCB DRONE
ArduProject/PCB_DRONE_C8
En este repositorio encontrareis los archivos de fabricación y las listas de montaje del PCB con STM32F103C8 que hemos visto en el curso.
153 parts1MIT - 2 layers58.5 × 40.6 mm
Placa
ArthurMLago/botwJoystickGyro
Making any controller have motion controls or use with CEMU
81 parts1 - 2 layers25 × 99 mm
Cremini blade atmega328p
nicklasfrahm/mykilio
Mykilio is the proposal for a new Living Standard with the goal to reimagine infrastructure management and monitoring.
102 parts1MIT - 2 layers169.4 × 71 mm
Transmitter PCB
PrashantHalai-212/Transmitter_PCB
A Batman inspired Batarang shaped wireless transmitter board featuring an ATmega328P microcontroller, NRF24L01 module, and onboard CH340G USB programmer.
55 parts1MIT