4 layers102 × 49 mm
CURSO PCB DRONE
ArduProject/PCB_DRONE_R8
En este repositorio encontrareis los archivos de fabricación y las listas de montaje del PCB con STM32F103R8 que hemos visto en el curso.
163 partsMIT
4 layers102 × 49 mm
CURSO PCB DRONE
ArduProject/PCB_DRONE_C81En este repositorio encontrareis los archivos de fabricación y las listas de montaje del PCB con STM32F103C8 que hemos visto en el curso.
- Size
- 102 × 49 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 153
- Nets
- 109
- Pads
- 542
- Tracks, vias
- 1,205, 272
- Pours
- 24
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Jan 2022
- Updated
- 26 Jan 2022
Overview
CURSO PCB DRONE is an open-source printed circuit board by ArduProject, from the ArduProject/PCB_DRONE_C8 repository on GitHub, published under the MIT licence. It is a 4-layer board of 102 × 49 mm with 153 parts on 109 nets, routed with 1,205 tracks and 272 vias.
It is built around the ATMEGA328P-AU, STM32F103C8T6 and 74AHC1G125GW, with the 74HC245D, NRF24L01P-R and CH340G among its other parts. Its parts include 48 capacitors, 36 resistors, 17 connectors, 13 diodes and 12 ICs. It belongs with the robots and motor control boards and the STM32 and AVR (ATmega, ATtiny) boards of this library.
Main components
11
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
74AHC1G125GW
SOT-353-40℃~+125℃ 1 1 2V~5.5V 4.8ns@5.5V,50pF 40uA 74AHC 8mA 8mA Tri-State Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
74HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
NRF24L01P-R
QFN-20-EP(4x4)-40℃~+85℃ -82dBm 0dBm 1.9V~3.6V 11.3mA 13.5mA 2.4GHz 2.4GHz~2.525GHz 2Mbps ISM Power-on reset function、Supports RSSI function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM358DR
UncategorisedUnknown maker
MPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdArchivos de fabricación de la versión del PCB con STM32F103C8
En este repositorio encontrareis los archivos de fabricación y las listas de montaje del PCB con STM32F103C8 que hemos visto en el curso. Enlace al curso: https://www.udemy.com/course/controlador-de-vuelo-drones-arduino-pcb/?referralCode=FD3F1CBF871EDFD84B6F
La estructura de las carpetas de este repositorio es la misma que hemos visto en el curso: una carpeta GERBER con los archivos de fabricación del PCB, y una carpeta MONTAJE con las listas de componentes y el archivo de colocación de huellas (CURSO_PCB_DRONE-all-pos.xlsx). Tambien se incluye un manual de montaje del PCB y del drone. La única diferencia con el curso es que al descargar el repositorio, dentro de la carpeta MONTAJE encontrareis dos listas en vez de una:
- Lista de componentes (BOM) para cargar en la web de JLCPCB, la lista que hemos generado en el vídeo anterior: CURSO_PCB_DRONE_BOM_JLCPCB.xlsx
- Lista con los componentes que tendremos que comprar y montar en el PCB y el drone (antena SMA, conector de batería XT60, motores, batería...): CURSO_PCB_DRONE_BOM_extra.xlsx
Parts
153| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C10, C11, C14, C15, C16, C19, C22, C23, C24, C33, C39, C44, C45 +5 |
| 8 | 10k | Resistor_SMD:R_0402_1005Metric | R11, R12, R13, R19, R30, R31, R33, R34 |
| 5 | 4.7k | Resistor_SMD:R_0402_1005Metric | R25, R26, R27, R28, R39 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C28, C29, C30, C43 |
| 4 | 12pF | Capacitor_SMD:C_0402_1005Metric | C17, C18, C35, C36 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R18, R22, R23, R24 |
| 4 | 22 | Resistor_SMD:R_0603_1608Metric | R9, R10, R16, R17 |
| 4 | M12V | CURSO_LIBRERIA:MountingHole_3.5mm_5.5mm | H1, H2, H3, H4 |
| 4 | MGND | CURSO_LIBRERIA:MountingHole_3.5mm_5.5mm | H5, H6, H7, H8 |
| 4 | ROJO | LED_SMD:LED_0603_1608Metric | D4, D5, D12, D13 |
| 4 | VERDE | LED_SMD:LED_0603_1608Metric | D10, D11, D14, D16 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C3, C7, C40 |
| 3 | B5819W | Diode_SMD:D_SOD-123 | D1, D2, D9 |
| 3 | RST | CURSO_LIBRERIA:KEY-TH_2P-L6.0-W3.5-P6.50 | SW1, SW2, SW3 |
| 2 | 1.5k | Resistor_SMD:R_0603_1608Metric | R20, R21 |
| 2 | 100Ohm @ 100Mhz | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | 10uF (t) | Capacitor_SMD:C_1206_3216Metric | C50, C51 |
| 2 | 16Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y5 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C13, C27 |
| 2 | 2.2nF | Capacitor_SMD:C_0402_1005Metric | C41, C47 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C25, C26 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric | R6, R38 |
| 2 | 33pF | Capacitor_SMD:C_0402_1005Metric | C20, C21 |
| 2 | 750 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | AZUL | LED_SMD:LED_0603_1608Metric | D6, D15 |
| 2 | USB_B_Micro | CURSO_LIBRERIA:MICRO-USB-SMD_5P-P0.65-H-F_MICRO5.9MMUSB | J1, J3 |
| 1 | 0.22uF | Capacitor_SMD:C_1206_3216Metric | C48 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 1.5pF | Capacitor_SMD:C_0402_1005Metric | C37 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C49 |
| 1 | 12Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R36 |
| 1 | 1pF | Capacitor_SMD:C_0402_1005Metric | C38 |
| 1 | 2.7nH | Inductor_SMD:L_0402_1005Metric | L4 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | 27nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 3.9nH | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 33nF | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 4.7pF | Capacitor_SMD:C_0402_1005Metric | C42 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 74AHC1G125 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U9 |
| 1 | 74HC245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U6 |
| 1 | 8.2nH | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 8Mhz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U12 |
| 1 | ATMEGA328P-AU | digikey-footprints:TQFP-32_7x7mm | U2 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | CONN_MANDO | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J8 |
| 1 | CONN_MOT_1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | CONN_MOT_2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | CONN_MOT_3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | CONN_MOT_4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | CONN_STM32_I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | CONN_STM32_SPI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | CONN_STM32_USART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_Coaxial | CURSO_LIBRERIA:SMA_142-0701-201 | J16 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | LIDAR | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J12 |
| 1 | LM358DR | digikey-footprints:SOIC-8_W3.9mm | U3 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U11 |
| 1 | LOGO | CURSO_LIBRERIA:LECHUZA | G*** |
| 1 | MICROSD_C164170 | CURSO_LIBRERIA:TF-SMD_472192001 | U7 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U10 |
| 1 | OLED | CURSO_LIBRERIA:OLED | J5 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | SW_Push_SPDT | CURSO_LIBRERIA:Switch_Slide | SW4 |
| 1 | XT-60 | CURSO_LIBRERIA:AMASS_XT60-M | J17 |
| 1 | jumper | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | nRF24L01P | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U5 |
The 149 most common of 153 parts.
Similar boards
- 4 layers102 × 49 mm
Drone flight controller
A1DS19/drone-flight-controller
A custom drone flight controller, designed in KiCad 10: an STM32F103R8T6 flight core paired with an ATmega328P telemetry co-processor on a four-layer, 102 × 49 mm PCB — taken from schematic capture through placement…
148 parts - 4 layers51 × 60.1 mm
Flight computer pcb
aminjahanpour/flight_computer_pcb
This repo contains KiCad files for an open source flight computer PCB.
87 parts - 2 layers81.5 × 62 mm
Do dong
skvalll/Ampere-current-measurement-circuit-using-ESP-12E
Researched current-sensing techniques and designed a current measurement system. Developed the schematic and PCB layout using KiCad, then assembled, soldered, and tested the prototype.
38 partsMIT - 4 layers100 × 100 mm
IMUnav H00
marouncz/IMU-navigation
This is a repository for my bachelor's thesis regarding IMU navigation
220 parts1MIT - 4 layers96 × 96 mm
- 2 layers100 × 100 mm
- 4 layers58.4 × 38.1 mm
Questions
How big is the CURSO PCB DRONE PCB?
It measures 102 × 49 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CURSO PCB DRONE use?
153 parts, built around the ATMEGA328P-AU, STM32F103C8T6, 74AHC1G125GW and 74HC245D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CURSO PCB DRONE KiCad files?
From the ArduProject/PCB_DRONE_C8 repository on GitHub, at the commit this page was made from: the board is CURSO_PCB_DRONE_C8/CURSO_PCB_DRONE.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CURSO PCB DRONE design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).