

Palmbci
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 101
- Pads
- 332
- Tracks, vias
- 521, 74
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Aug 2026
- Updated
- 8 Sep 2026
Overview
Palmbci is an open-source printed circuit board by eltonv, from the eltonv/palmbci repository on GitHub. It is a 2-layer board of 50 × 50 mm with 61 parts on 101 nets, routed with 521 tracks and 74 vias.
It is built around the ADS1292IRSMR, CP2102N-A02-GQFN28 and AP2112K-3.3, with the MCP73831T-2ACI/OT-HXY among its other parts. It belongs with the ESP32 boards of this library.
Main components
4ADS1292IRSMR
VQFN-32(4x4)-40℃~+85℃ 107dB 2 2.42V、4.033V 2.7V~5.25V 20uA 24 512kHz Programmable gain、Multiplexers、Internal reference source、Built-in temperature sensor SPI VQFN-32(4x4) Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)CP2102N-A02-GQFN28
QFN-28-EP(5x5)-40℃~+85℃ 195uA 3V~3.6V 9.5mA USB 2.0 USB to UART QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedMCP73831T-2ACI/OT-HXY
SOT-23-5LBattery ManagementHXY MOSFET
README
README.mdpalmbci
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | T_ESP_EN1, T_USB_DN1, TBOOT_IO0, TP_3V3, TP_GND1, TP_VBAT1, TP_VBUS1, TUART_DTR1, TUART_RTS1, TUART0_RX1, TUART0_TX1, TUSB_DP1 |
| 7 | 0.1u | Capacitor_SMD:C_0201_0603Metric | C_AVDD_0V1, C_DVDD_0V1, C_EN1, C_ESP_0V1A1, C_ESP_0V1B1, C_UART_0V1, C_VREF1 |
| 6 | 10k | Resistor_SMD:R_0201_0603Metric | R_EN1, R_GEN1, R_GIO0, R_IO0, R_RESET1, R_START1 |
| 5 | 100k | Resistor_SMD:R_0201_0603Metric | R_EOG1N1, R_EOG1P1, R_PD_EN1, R_PDIO0, R_REF1 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C_3V3_BULK1, C_LDO_IN1, C_LDO_OUT1 |
| 3 | 220p | Capacitor_SMD:C_0201_0603Metric | C_EOG1N1, C_EOG1P1, C_REF1 |
| 3 | 5.1k | Resistor_SMD:R_0201_0603Metric | R_CC1, R_CC2, R_PROG1 |
| 2 | 10u | Capacitor_SMD:C_0201_0603Metric | C_AVDD_10, C_VCAP1 |
| 2 | 1k | Resistor_SMD:R_0201_0603Metric | R_LED1, R_RSTB1 |
| 2 | 1u | Capacitor_SMD:C_0201_0603Metric | C_DVDD_1, C_VCAP2 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q_EN1, Q_IO0 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW_BOOT1, SW_RESET1 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C_VBAT1 |
| 1 | 4.7u | Capacitor_SMD:C_0201_0603Metric | C_VBUS1 |
| 1 | ADS1292IRSMR | footprints:ADS1292 | U_AFE1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | CP2102N-A02-GQFN28 | footprints:CP2102 | U_UART1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J_BAT1 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J_EOG1 |
| 1 | ESP32-S3-WROOM-2 | RF_Module:ESP32-S3-WROOM-2 | U3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D_CHG1 |
| 1 | MCP73831T-2ACI_OT | footprints:MCP73831T | U1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPDT_Shouhan_MSK12C02 | SW_PWR1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J_USB1 |
Similar boards
- 6 layers39.8 × 50.2 mm

- 2 layers48 × 28 mm

Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
9 parts - 2 layers72 × 72 mm

Air quality pcb v6
NilsEngelbach/air-quality-pcb
Seventh iteration: ESP8266 → ESP32-C3 (native USB, no UART bridge), fixes from the v6 design review, right-angle switches with longer actuators, a STEMMA QT port for optional sensors, and charge-status sensing.
72 parts - 4 layers60 × 60 mm

3117 AUSIGN
r4hulrr/ausign
Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.
151 parts3MIT - 4 layers87.1 × 67.4 mm

RFclockgen
Jjbinstock/RF-Clock-Generator
A dual channel, tunable RF clock generator PCB project
75 parts - 2 layers61 × 61 mm

- 2 layers59.5 × 101 mm

Mouse
unknownusername504/WirelessMouse
A wireless mouse with open source pcb/schematic as well as drivers to come.
54 parts35GPL-3.0 - 2 layers290 × 100 mm

ESP32-Wall Clock
SkullKill/ESP32-Wall-Clock-PCB
ESP32 based 30cm Wall Mounted Clock. WiFi, NTP, SNMP, web interface, MicroUsb, Type-C, HG3613 Retrofit
207 parts3GPL-3.0
Questions
How big is the Palmbci PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Palmbci use?
61 parts, built around the ADS1292IRSMR, CP2102N-A02-GQFN28, AP2112K-3.3 and MCP73831T-2ACI/OT-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Palmbci KiCad files?
From the eltonv/palmbci repository on GitHub, at the commit this page was made from: the board is hardware/kicad/PalmBCI.kicad_pcb and its schematic hardware/kicad/PalmBCI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Palmbci design in my own project?
Its repository states no licence, so its author keeps all rights: ask eltonv before reusing the design.