

AortaAlarm
stuff
- Size
- 39.8 × 50.2 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 93
- Pads
- 278
- Tracks, vias
- 884, 212
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Apr 2026
- Updated
- 28 Aug 2026
Overview
AortaAlarm is an open-source printed circuit board by shreeyuvan2020, from the shreeyuvan2020/AortaAlarm repository on GitHub. It is a 6-layer board of 39.8 × 50.2 mm with 64 parts on 93 nets, routed with 884 tracks and 212 vias.
It is built around the ADS1292IRSMR and PRTR5V0U2X. Its parts include 36 capacitors, 13 resistors, 4 ICs, 4 connectors and 2 diodes. It belongs with the nRF52 and nRF5x boards of this library.
Main components
2ADS1292IRSMR
VQFN-32(4x4)-40℃~+85℃ 107dB 2 2.42V、4.033V 2.7V~5.25V 20uA 24 512kHz Programmable gain、Multiplexers、Internal reference source、Built-in temperature sensor SPI VQFN-32(4x4) Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1 uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C11, C14, C16, C32, C34 |
| 5 | 1 uF | Capacitor_SMD:C_0402_1005Metric | C9, C10, C15, C18, C19 |
| 4 | 10 uF | Capacitor_SMD:C_0603_1608Metric | C2, C17, C20, C21 |
| 4 | 10M | Resistor_SMD:R_0603_1608Metric | R7, R8, R11, R12 |
| 4 | 12 pF | Capacitor_SMD:C_0402_1005Metric | C22, C23, C24, C25 |
| 4 | 2.2 nF | Capacitor_SMD:C_0402_1005Metric | C30, C31, C33, C35 |
| 3 | 4.7 uF | Capacitor_SMD:C_0603_1608Metric | C1, C27, C28 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R14, R15 |
| 2 | 4.7 nF | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 40.2k | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 5.1 K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 0.5 pF | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 0.8 pF | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 1.5 nF | Capacitor_SMD:C_0402_1005Metric | C36 |
| 1 | 100 pF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 32 mHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768 kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 4.7 nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | ADS1292IRSMR | Sensor:QFN40P400X400X100-33N | U2 |
| 1 | Antenna_Shield | RF_Antenna:Texas_SWRA117D_2.4GHz_Right | AE1 |
| 1 | AudioJack3_Ground | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J3 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | LED | Diode_SMD:D_0805_2012Metric | D1 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | MCP73831-2-OT | Battery:SON50P200X300X100-9N | U4 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D4 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | nRF52840 | Package_DFN_QFN:Nordic_AQFN-73-1EP_7x7mm_P0.5mm | U1 |
Similar boards
- 2 layers50 × 50 mm

- 2 layers48 × 28 mm

Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
9 parts - 2 layers181 × 97 mm

OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers68.6 × 53.3 mm

- 4 layers59 × 33.8 mm

- 4 layers137 × 86 mm

- 4 layers230.7 × 97.8 mm

- 2 layers285 × 94.6 mm

Questions
How big is the AortaAlarm PCB?
It measures 39.8 × 50.2 mm and has 6 copper layers, 1.6 mm thick.
What parts does the AortaAlarm use?
64 parts, built around the ADS1292IRSMR and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AortaAlarm KiCad files?
From the shreeyuvan2020/AortaAlarm repository on GitHub, at the commit this page was made from: the board is aortaalarm.kicad_pcb and its schematic aortaalarm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AortaAlarm design in my own project?
Its repository states no licence, so its author keeps all rights: ask shreeyuvan2020 before reusing the design.