Skip to the content
2 layers50 × 50 mmPalmbci, the printed circuit board in 3D
Size
50 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
101
Pads
332
Tracks, vias
521, 74
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 Aug 2026
Updated
8 Sep 2026

Overview

Palmbci is an open-source printed circuit board by eltonv, from the eltonv/palmbci repository on GitHub. It is a 2-layer board of 50 × 50 mm with 61 parts on 101 nets, routed with 521 tracks and 74 vias.

It is built around the ADS1292IRSMR, CP2102N-A02-GQFN28 and AP2112K-3.3, with the MCP73831T-2ACI/OT-HXY among its other parts. It belongs with the ESP32 boards of this library.

Main components

4

README

README.md

palmbci

Parts

61
QtyValueFootprintReferences
12TestPointTestPoint:TestPoint_Pad_D1.5mmT_ESP_EN1, T_USB_DN1, TBOOT_IO0, TP_3V3, TP_GND1, TP_VBAT1, TP_VBUS1, TUART_DTR1, TUART_RTS1, TUART0_RX1, TUART0_TX1, TUSB_DP1
70.1uCapacitor_SMD:C_0201_0603MetricC_AVDD_0V1, C_DVDD_0V1, C_EN1, C_ESP_0V1A1, C_ESP_0V1B1, C_UART_0V1, C_VREF1
610kResistor_SMD:R_0201_0603MetricR_EN1, R_GEN1, R_GIO0, R_IO0, R_RESET1, R_START1
5100kResistor_SMD:R_0201_0603MetricR_EOG1N1, R_EOG1P1, R_PD_EN1, R_PDIO0, R_REF1
310uCapacitor_SMD:C_0805_2012MetricC_3V3_BULK1, C_LDO_IN1, C_LDO_OUT1
3220pCapacitor_SMD:C_0201_0603MetricC_EOG1N1, C_EOG1P1, C_REF1
35.1kResistor_SMD:R_0201_0603MetricR_CC1, R_CC2, R_PROG1
210uCapacitor_SMD:C_0201_0603MetricC_AVDD_10, C_VCAP1
21kResistor_SMD:R_0201_0603MetricR_LED1, R_RSTB1
21uCapacitor_SMD:C_0201_0603MetricC_DVDD_1, C_VCAP2
22N7002Package_TO_SOT_SMD:SOT-23Q_EN1, Q_IO0
2SW_PushButton_Switch_THT:SW_PUSH_6mmSW_BOOT1, SW_RESET1
14.7uCapacitor_SMD:C_0805_2012MetricC_VBAT1
14.7uCapacitor_SMD:C_0201_0603MetricC_VBUS1
1ADS1292IRSMRfootprints:ADS1292U_AFE1
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U2
1CP2102N-A02-GQFN28footprints:CP2102U_UART1
1Conn_01x02Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ_BAT1
1Conn_01x03_PinConnector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_HorizontalJ_EOG1
1ESP32-S3-WROOM-2RF_Module:ESP32-S3-WROOM-2U3
1LEDLED_SMD:LED_0603_1608MetricD_CHG1
1MCP73831T-2ACI_OTfootprints:MCP73831TU1
1SW_SPSTButton_Switch_SMD:SW_SPDT_Shouhan_MSK12C02SW_PWR1
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_GCT_USB4085J_USB1

Similar boards

  • 6 layers39.8 × 50.2 mmAortaAlarm, the printed circuit board in 3D

    AortaAlarm

    shreeyuvan2020/AortaAlarm

    stuff

    64 parts
  • 2 layers48 × 28 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hardware-design-lab

    Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

    9 parts
  • 2 layers72 × 72 mmAir quality pcb v6, the printed circuit board in 3D

    Air quality pcb v6

    NilsEngelbach/air-quality-pcb

    Seventh iteration: ESP8266 → ESP32-C3 (native USB, no UART bridge), fixes from the v6 design review, right-angle switches with longer actuators, a STEMMA QT port for optional sensors, and charge-status sensing.

    72 parts
  • 4 layers60 × 60 mm3117 AUSIGN, the printed circuit board in 3D

    3117 AUSIGN

    r4hulrr/ausign

    Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.

    151 parts3MIT
  • 4 layers87.1 × 67.4 mmRFclockgen, the printed circuit board in 3D

    RFclockgen

    Jjbinstock/RF-Clock-Generator

    A dual channel, tunable RF clock generator PCB project

    75 parts
  • 2 layers61 × 61 mmCo2-sensor, the printed circuit board in 3D

    Co2-sensor

    blinry/co2-canary

    An open-hardware, ultra-low power CO2 sensor

    57 parts78
  • 2 layers59.5 × 101 mmMouse, the printed circuit board in 3D

    Mouse

    unknownusername504/WirelessMouse

    A wireless mouse with open source pcb/schematic as well as drivers to come.

    54 parts35GPL-3.0
  • 2 layers290 × 100 mmESP32-Wall Clock, the printed circuit board in 3D

    ESP32-Wall Clock

    SkullKill/ESP32-Wall-Clock-PCB

    ESP32 based 30cm Wall Mounted Clock. WiFi, NTP, SNMP, web interface, MicroUsb, Type-C, HG3613 Retrofit

    207 parts3GPL-3.0

Questions

How big is the Palmbci PCB?

It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Palmbci use?

61 parts, built around the ADS1292IRSMR, CP2102N-A02-GQFN28, AP2112K-3.3 and MCP73831T-2ACI/OT-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Palmbci KiCad files?

From the eltonv/palmbci repository on GitHub, at the commit this page was made from: the board is hardware/kicad/PalmBCI.kicad_pcb and its schematic hardware/kicad/PalmBCI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Palmbci design in my own project?

Its repository states no licence, so its author keeps all rights: ask eltonv before reusing the design.